006 Book Cards
Card che si aprono come un libro al passaggio del mouse
Card che si aprono come un libro: a riposo sembrano card normali, al passaggio del mouse si aprono un po’ e mostrano le pagine interne. Tre stili tra cui scegliere.
Nei prodotti generati con l’AI, le card sono l’elemento che più facilmente si somiglia. Le card a libro restano invariate a riposo e, al passaggio del mouse o al focus, si aprono un po’ come un piccolo libro, mostrando alcune pagine all’interno. I punti principali sono quattro:
- Struttura: adatte alle card che rappresentano contenuti, come documenti, voci di una knowledge base, modelli e lavori di un portfolio; le card che sono solo un punto di accesso, come «Impostazioni», non hanno pagine interne e non sono adatte. La card è formata da copertina, 4 pagine interne e retro sovrapposti, e si apre ruotando sul lato sinistro; a riposo tutti i livelli coincidono perfettamente.
- Tempi: la copertina si apre più di tutti, e ogni livello più interno si apre meno e parte più tardi: angolo = 42° × 0.7ⁿ, ritardo = 28ms × n. I livelli arrivano a circa 42°, 29°, 21° e 14°; quando il puntatore se ne va si chiudono in ordine inverso, a partire dalla pagina più interna.
- Luce e ombra: la luce viene dall’alto e l’ombra cade sotto la card. L’ombra è fatta di due forme piene che, mentre la card si apre, si allungano verso il basso e si ammorbidiscono; ogni pagina proietta un’ombra su quella successiva finché le due non si separano. Non si usa
box-shadow: è un anello vuoto, e quando la copertina si apre il contorno resterebbe visibile. - Tre stili: Default riprende lo stile delle card già presenti nel prodotto ed è adatto alle normali card di prodotto; Skeuomorphic sembra un libro con copertina rigida su una parete di galleria, con trama di tela e ombre grigie tendenti al caldo; Minimal sembra una documentazione tecnica, con copertine chiare a tinta unita e illustrazioni a linee sottili.
Inoltre, l’apertura riguarda solo la card: dimensioni e posizione della card non cambiano, e anche le card intorno e il layout restano fermi.
Parametri
- Angolo
- Copertina 42°; × 0.7 per ogni livello più interno
- Ritardo
- +28ms per ogni livello più interno
- Pagine
- 4; incernierate sul lato sinistro
Il prompt abbinato chiede prima stile, numero di pagine e direzione di apertura, poi adatta le card già presenti nel progetto.
Make the cards in my product open a little, like a book, when hovered.
At rest a card must look exactly as it does today; only hover or focus
reveals that it is a small book with pages inside.
## 0. Start from what exists
- Find the card component I name (or the one used in the grid or list I
point to) and retrofit it in place. Reuse its markup, design tokens,
radius, shadow and motion or spring utilities.
- Keep the card's footprint, padding, content and layout unchanged.
Nothing around the card may move.
- If I ask for new cards instead, build a fresh square card (about
280 x 280) in the style I choose below.
- Any option I leave unset uses the default marked *.
## 1. Choose a style
Default*: ordinary product cards, identical to normal ones until hovered.
- Surface: plain white (or my card surface token), no texture.
- Edge: a 1px hairline in my border colour.
- Shadow: light, neutral cool grey, half strength.
- Type: the product sans. Title 24/600, description 15 muted,
meta 14 muted.
- Cover: the existing card UI: a 48px icon tile, a ↗ arrow top right,
title, description, and a meta footer below a hairline.
- Wall: my normal page background.
- Pages: white, a faint shade toward the spine, a small heading and
4-6 grey text lines.
Skeuomorphic: hardcover books on a gallery wall.
- Surface: fine bookcloth grain over a deep cover colour.
- Edge: a lit bevel: bright top edge, darker foot.
- Shadow: warm, near-neutral grey (never orange), full strength.
- Type: one serif title, bottom left. Nothing else on the cover.
- Cover: a full-bleed image or animated ASCII scene, with a soft gloss
at the top and shade at the foot.
- Wall: warm plaster with a fine grain and a spotlight over each book.
- Pages: cream paper with grain, an italic chapter heading, justified
lines, and thin page edges along the fore-edge.
Minimal: documentation volumes.
- Surface: flat off-white, light grey or graphite, one tone per card.
- Edge: a faint bevel or hairline.
- Shadow: cool neutral grey.
- Type: a mono section number and version on top, over a hairline rule;
a two-line sans title and a small grey label at the foot.
- Cover: one small grey line diagram with a single element in the ink
colour.
- Wall: cool grey with a faint 24px dot grid and soft light from above.
- Pages: cool white, a sans heading and grey lines.
Match my product: take surface, edge, shadow, type and wall from my
tokens, and keep the cover exactly as the card is today.
## 2. Options (defaults marked *)
- Intensity: subtle (A = 24deg) | book* (A = 42deg) | dramatic
(A = 60deg).
- Pages: 2 | 3 | 4* | 6.
- Hinge: left* | right | top.
- Trigger: hover* | press (open while pressed) | scroll into view (open
once when 60% visible, close after ~1.2s). Keyboard focus always
opens it too.
- Pages show: blank paper | lines of text* | real preview content from
the card (its next fields, a short list, a chart thumbnail).
- Cover: existing card UI* | image | animated ASCII scene | solid colour.
- Shadow direction: from above* | from top-left.
- Shadow strength: none | light | normal* | deep.
- Corners: match my tokens* | continuous (superellipse).
- Motion feel: snappy (k 320, damping 0.9) | default* (k 240,
damping 0.86) | soft (k 160, damping 0.8). All barely overshoot.
- Reduced motion: tiny lift* | nothing.
- Touch: press* | scroll into view | off.
## 3. Layer stack
- Inside the card's link, put the cover on a body element with
transform-style: preserve-3d. Behind it stack N pages and a back
board, all absolutely positioned on the same square.
- Order, front to back: cover (n = 0), pages (n = 1..N), back board
(n = N + 1, never moves).
- The cover keeps all of the card's existing content. Pages and the
back board are decorative: aria-hidden, no links, no tab stops.
- Perspective on the static outer element: about 1100px, origin toward
the hinge (30% 50% for left, 70% 50% for right, 50% 30% for top).
- transform-origin on the hinge edge of every layer: left 0 50%,
right 100% 50%, top 50% 0. backface-visibility: hidden.
- Lift layer n by translateZ((N + 1 - n) x 0.6px) so layers never
fight in depth.
- Pages sit 8px inside the cover (4px at the spine), like a book block,
with radius = cover radius - 8.
- Back board: on flat cards (Default, Minimal) inset it ~6px from the
cover with radius = cover radius - 6, so it never peeks out past the
cover's foreshortened corners. On Skeuomorphic it is flush, the cover
colour darkened ~28%.
## 4. Motion
- Layer n turns toward the viewer by
angle(n) = A x 0.7^n
and starts
delay(n) = 28ms x n
later. The cover leads; pages fan out behind it.
- Direction: rotateY(-angle) for a left hinge, rotateY(+angle) for
right, rotateX(+angle) for top.
- Each layer runs on its own spring (see Motion feel), settling in
about 0.3s.
- Close in reverse: the innermost page first, delay = 28ms x (N - n),
back to 0deg.
- If the pointer leaves mid-way, retarget from the current angle and
velocity. Never jump.
- No spring helper in the project? CSS transitions are fine: transition
transform over ~420ms with a slight overshoot, e.g.
cubic-bezier(0.3, 1.2, 0.5, 1), and set transition-delay to 28ms x n
in the open state and 28ms x (N - n) at rest (the target state's delay
applies, so closing runs in reverse).
## 5. Light and shading
- Light comes from above, so the shadow falls down the wall.
- The shadow is two solid shapes behind the card, each blurred once.
At rest it hugs the card like any flat card's:
- contact: small and darker, at the foot. Lower half of the card,
~4px in from each side, blur ~4px, ~2px down, ~22% opacity.
- ambient: faint. Blur ~14px, ~6px down, ~12% opacity.
- Never a box-shadow: it is a hollow ring and shows as an outline once
the cover swings off it.
- Tint: near-neutral grey nudged toward the wall (warm grey on a warm
wall, cool grey on a cool one). Never pure black, never saturated.
- Strength scales both opacities: light 0.5 (Default style), normal 1,
deep 1.4.
- Opening: crossfade to a second pre-blurred pair that is longer and
softer (contact blur ~12px, 12px down; ambient blur ~38px, 26px down),
and move it ~14px further down and ~4% wider with transform. Drive it
with one progress value o (0..1) on its own spring (k 200, damping
0.9): rest pair opacity 1 - o, open pair opacity o.
- Leaf shading: every page has an overlay gradient from the spine
(32% dark -> 8% at 55% -> 0 at 85%). Its opacity is
clamp(gap / 6, 0, 1) x max(0, 1 - gap / 30)
where gap = the angle of the leaf in front minus this leaf's angle.
A page is shaded while the leaf in front is just lifting off it, then
lit once they part.
- Covers (Skeuomorphic, Minimal): a soft gloss at the top edge and a
little shade at the foot.
## 6. Corners and edges
- Clip every layer (cover, pages, back board) to one shape path, and
draw its edge (hairline or bevel) along that exact path, e.g. an SVG
path stroked over the layer. Do not mix a CSS border or inset
box-shadow with the clip: they disagree at the corners and show a
second rim when the layers part.
- Match my tokens: use the token radius; nested radius = outer - inset.
- Continuous: superellipse corners |x|^n + |y|^n = 1 with n = 2^1.25
(the same curve as CSS corner-shape: superellipse(1.25)). Generate a
clip-path: path(...) per layer size, reuse it for the edge, and
regenerate on resize.
## 7. Interaction and accessibility
- Hit-test on the resting footprint: listen for hover on the static
outer element and give every moving layer pointer-events: none, so a
swinging cover never moves the target and the card never flickers
open and closed at its edges.
- Cursor: a pointing hand over the whole card.
- The whole card stays one <a> or <button> with its current accessible
name. Pages add nothing to the accessibility tree.
- :focus-visible opens it exactly like hover. Keep the focus ring on the
outer element, along the resting shape.
- Reduced motion: no fan and no rotation. The cover lifts ~2px and the
shadow crossfades to the open pair.
- Touch: no hover. Use the Touch option; a tap must still activate the
card on the first try.
## 8. Performance
- Animate transform and opacity only. Never animate blur, box-shadow,
clip-path, width, height or top/left.
- Never animate a blur radius: blur each shadow once and crossfade the
two pre-blurred versions.
- One requestAnimationFrame loop for all cards. Skip cards whose springs
are at rest, and stop the loop when nothing moves.
- Write a style only when its value changes (cache the last string per
element).
- No layout reads per frame: measure once, and again on resize
(ResizeObserver).
- Animated canvas covers: draw at ~30fps at most, and pause when off
screen (IntersectionObserver) or when the tab is hidden.
## 9. Animated ASCII cover (only if chosen)
- Paint a small scene as one colour per character cell (~6 x 9px).
- Pick each character by brightness from " .:-=+*#%@".
- Draw a dimmed copy of the colours (~40%) underneath and the coloured
characters on top, so the gaps read like a halftone.
- Stamp characters from a pre-rendered glyph atlas instead of laying out
text every frame. Keep the motion slow and seamlessly looping.
## 10. When done
- List every file you changed or added.
- List the style and every option you used, marking which were
defaults.
- Note anything that no longer looks identical at rest.




















