Vibe Design Tips

ASCII ve dithering efektleri

003 ASCII and Dither

ASCII ve dithering efektleri

Görsel efektler

Giriş sayfalarındaki, web sitelerindeki ve kartlardaki görsellere ve videolara ASCII ve Dither efekti ekleyin; efektin gücü istendiği zaman ayarlanabilir.

ASCII ve Dither görüntüyü parlaklığa göre karakterlerle ya da piksel dokusuyla yeniden çizer; açık-koyu yapıyı korur, fotoğrafın ayrıntılarını atar. Tüm parametreler ayarlanabildiği için aynı görsel hem ana görsel olabilir hem de arka plana çekilip doku olarak kullanılabilir. Başlıca beş nokta şunlardır:

  1. ASCII: terminal ve kod havası için uygundur, örneğin bir geliştirici aracının giriş sayfası. Görüntü bir ızgaraya bölünür ve her hücre parlaklığına göre bir karakterle değiştirilir; karakterler “.” karakterinden “@” karakterine doğru yoğunlaşır. Boyut yazı tipi boyutudur, aralık ızgaranın sıklığıdır, örnekleme gücü açık-koyu kontrastıdır.
  2. Dither: baskıdaki yarım ton noktaları ya da piksel tanecikleri havası için uygundur. Görüntü piksel bloklarına bölünür, 4×4 Bayer matrisi eşik olarak kullanılır ve her renk birkaç seviyeye indirilir; uzaktan bakıldığında bunlar karışarak ara gri tonları oluşturur. Boyut piksel bloğudur, aralık desenin ölçeğidir; örnekleme gücü arttıkça renk seviyesi azalır, tanecik hissi belirginleşir.
  3. Maske: iki efekt için de geçerlidir. Görüntünün üzerine dikey bir gradyan katmanı eklenir; görüntü geri çekilir ve efekt gürültüden çok doku gibi görünür. Efekt üstteki metni bozuyorsa önce maskeyi artırın.
  4. Örneklenen bölge: yalnızca ASCII için geçerlidir; karakterlerin gölgeleri mi yoksa parlak alanları mı çizeceğini belirler ve görüntünün ana öğesinin bulunduğu ton aralığına göre seçilir. Şehir gece manzarasında ana öğe ışıklardır, parlak alanlar örneklenir; beyaz zemin üzerindeki koyu bir ürün fotoğrafında gölgeler örneklenir.
  5. Renk tonu: özgün renkler korunabilir ya da beş paletten biri seçilebilir; görselin açık-koyu değerleri önce bu palete eşlenir, sonra efekt üretilir. Böylece farklı görsellerin stili tutarlı kalır.

Parametreler

ASCII
Maske 90; örnek tonlar Gölgeler; örnekleme gücü 100; boyut 37; aralık 0
Dithering
Maske 88; örnekleme gücü 100; boyut 15; aralık 0

Ekteki Prompt önce hangi görselin ya da videonun işleneceğini sorar, ardından ona efekti uygular ve yanına gerçek zamanlı ayarlanabilen bir parametre paneli ekler.

PromptClaude Code veya Cursor gibi bir Agent’a yapıştırın
Add an ASCII / ordered-dither effect to one specific image or video in
this project, with a live control panel next to it. Use the asset and the
place I name (an <img>, a <video>, or a file path or URL, and the page or
section it sits in); ask me if I have not named them. Apply the effect to
that asset only, in place: keep its size, position, rounded corners and
anything layered on top of it. If the project already has an image or
canvas effect pipeline, or slider, segmented-control and panel components,
build on them; otherwise create a reusable EffectLayer and EffectPanel.

Settings, one object shared by the layer and the panel:
{ filter: 'ascii' | 'dither', mask, palette, inkTone, strength, size,
  spacing }
Keep separate values per filter, so switching filters brings back that
filter's own settings.

What each control does in each filter, its range, and the recommended
value (ASCII / Dither):
- Mask effect, 0-100 (90 / 88): a vertical veil over the picture so the
  effect reads as texture rather than noise. Same in both filters.
- Color, Original or one of five palettes (Original): gradient-maps the
  asset's luminance into one color family before filtering.
- Sample tones, Shadows | Highlights (Shadows; ASCII only, hidden for
  Dither): which end of the tonal range becomes dense characters.
- Sampling strength, 0-100 (100 / 100). ASCII: contrast of the tone curve
  and how bright and opaque the characters are. Dither: how few levels
  each color channel keeps (8 at 0, 2 at 100) and how fully the quantized
  color replaces the original.
- Size, 0-100 (37 / 15). ASCII: font size, 7-24px. Dither: pixel block,
  2-9px.
- Spacing, 0-100 (0 / 0). ASCII: grid step, 8-24px across and 9-26px
  down, never tighter than the glyphs. Dither: scale of the Bayer
  pattern, 1-4 blocks per matrix cell.

Helpers used throughout:
- range(v, a, b) = a + (b - a) * v / 100
- luminance L = (0.299 R + 0.587 G + 0.114 B) / 255
- s = strength / 100
- "The box" is the asset's rendered size on the page.

Sampling:
- Cover-fit the asset into the box and draw it into a small sampling
  canvas (about 480px on the long side), then read it with getImageData.
  A sample is the pixel under a point in the box, composited over white.
- With a palette, recolor that canvas first: map each pixel's L through a
  256-entry lookup built from the palette's four stops.
- Per image or video frame, take about 12,000 evenly spaced samples:
  low = 8th percentile of L, high = 92nd percentile.
- Shadows means dark ink, Highlights light ink.

ASCII:
- Characters, from empty to full: "  .,:;-=+xX08S#&@" (starts with two
  spaces).
- Font: round(range(size, 7, 24))px monospace (22 instead of 24 when the
  box is under 720px wide), centered in each cell.
- Grid: x step = max(range(spacing, 8, 24), widest glyph * 1.08); line
  height = max(range(spacing, 9, 26), height of "@" * 1.12, font * 1.04).
  The first cell sits half a step in from the edge.
- Tone of a cell: raw = dark ink ? 1 - L : L; normalized = dark ink ?
  (high - L) / (high - low) : (L - low) / (high - low), clamped 0-1 (use
  raw alone when high - low < 0.025); mix = 0.72 + 0.14 s;
  t = raw (1 - mix) + normalized mix. Then a tone curve: black = 0.22 s,
  white = 1 - 0.08 s, lev = clamp((t - black) / (white - black), 0, 1),
  tone = lev (1 - s) + smoothstep(lev) s.
- Skip cells with tone <= 0.02. Character = chars[round(tone * 16)]; skip
  spaces.
- Ink: the sampled color lifted in HSV: value += (1 - value) *
  (0.24 + 0.18 s + 0.24 tone); saturation *= 1 + 0.16 + 0.2 s (clamped).
  Alpha = clamp((0.12 + 0.7 tone) (0.72 + 0.28 s), 0.06, 0.94).

Dither (ordered, Bayer 4x4):
- pixel size = max(2, round(range(size, 2, 9))) (7 instead of 9 under
  720px); pattern scale = max(1, round(range(spacing, 1, 4))); levels =
  max(2, round(range(strength, 8, 2))) per channel; blend =
  range(strength, 0.32, 1).
- Matrix [[0,8,2,10],[12,4,14,6],[3,11,1,9],[15,7,13,5]]; threshold =
  (m + 0.5) / 16, indexed by floor(x / pattern scale), floor(y / pattern
  scale).
- For each block sample its center, push saturation away from luma by
  1 + 0.06 + 0.18 s, then per channel: scaled = c / 255 * (levels - 1);
  q = floor(scaled) + (fraction > threshold ? 1 : 0);
  out = c + (q / (levels - 1) * 255 - c) * blend.
- Write the blocks into a canvas of box / pixel size and draw it scaled up
  with image smoothing off.

Mask and layering:
- The mask is a vertical gradient with stops at the top, 42% and the
  bottom. Base opacities: on a light page white 54/20/38%, on a dark page
  black 44/20/50%. For a mask value v: stop = v <= 50 ? base *
  (v / 50)^1.08 : base + (100 - base) * ((v - 50) / 50)^1.08.
- ASCII: draw the (recolored) picture, the mask, then the characters.
  Dither: draw the dithered picture, then the mask on top.
- Changing filter or palette cross-fades from the last frame over 150ms.

Palettes (four stops at 0, 0.4, 0.74, 1):
- meadow: #2B361F, #677D45, #AEBA78, #E5E1BD
- blue: #192A4D, #326AC5, #A2C2F1, #EDF3FC
- amber: #3C200F, #A74C15, #EF9A46, #F7E7CA
- lavender: #292144, #6552AB, #B3A5E4, #F0ECFB
- mono: #151515, #575757, #A6A6A6, #ECECEC

Rendering:
- Draw into a canvas laid over the asset with the same size and corner
  radius, at devicePixelRatio capped at 1.6x and about 2048 x 2048.
- Image: redraw when a setting changes (debounced 72ms).
- Video: redraw on every new frame (requestVideoFrameCallback, falling
  back to requestAnimationFrame) while it plays and is on screen; keep
  the video element underneath as the source.

Control panel:
- Place it next to the asset, below it when there is room, otherwise
  beside it, never covering it. About 420px wide, centered on the asset.
- Rows, in order: Mask effect, Filter (two tabs: ASCII | Dither), Color
  (round swatches), Sample tones (ASCII only), Sampling strength, Size,
  Spacing (shown with %).
- Each row 46px tall: a 136px label column, then the control. Slider: a
  22px track with 8px radius and a filled part, a 9x30 rounded-rectangle
  thumb (3px radius), a number box with the value centered, and a snap
  mark at 50. Swatches: 22px circles, each filled with its palette's two
  middle stops at 135deg (Original: a tiny crop of the asset); the
  selected one gets a ring with a small gap.
- Every change applies live while dragging. Add a "Reset to recommended"
  action that restores the values above for the current filter.
- Follow the page's light or dark theme and the project's tokens.