{
  "language": {
    "id": "tr",
    "tag": "tr",
    "name": "Türkçe"
  },
  "note": "Düzeltme önermek için bu dilin metnini indirin, düzenleyin ve dosyayı i@kubai.design adresine gönderin.",
  "contact": "i@kubai.design",
  "format": "Each entry gives the English (\"en\") and this language (\"text\"). Change only \"text\", keep {placeholders}, code and HTML tags as they are, and send the file back.",
  "interface": {
    "colon": {
      "en": ": ",
      "text": ": "
    },
    "all": {
      "en": "All",
      "text": "Tümü"
    },
    "saved": {
      "en": "Saved",
      "text": "Kaydedilenler"
    },
    "filterLabel": {
      "en": "Filter by category",
      "text": "Kategoriye göre filtrele"
    },
    "savedNone": {
      "en": "No saved tips yet",
      "text": "Henüz kaydedilen ipucu yok"
    },
    "savedSignIn": {
      "en": "Sign in to see the tips you saved",
      "text": "Kaydettiğiniz ipuçlarını görmek için giriş yapın"
    },
    "marksTitle": {
      "en": "(n) => `${n} ${n === 1 ? \"highlight\" : \"highlights\"}`",
      "text": "(n) => `${n} vurgu`"
    },
    "marksExport": {
      "en": "Export as Markdown",
      "text": "Markdown olarak dışa aktar"
    },
    "ellipsis": {
      "en": "…",
      "text": "…"
    },
    "marksExported": {
      "en": "Highlights exported",
      "text": "Vurgular dışa aktarıldı"
    },
    "marksFile": {
      "en": "My highlights · Vibe Design Tips",
      "text": "Vurgularım · Vibe Design Tips"
    },
    "signInClosed": {
      "en": "Sign-in is not open yet",
      "text": "Giriş henüz açık değil"
    },
    "signIn": {
      "en": "Sign in",
      "text": "Giriş yap"
    },
    "save": {
      "en": "Save",
      "text": "Kaydet"
    },
    "unsave": {
      "en": "Remove from saved",
      "text": "Kaydedilenlerden çıkar"
    },
    "savedState": {
      "en": "Saved",
      "text": "Kaydedildi"
    },
    "copy": {
      "en": "Copy",
      "text": "Kopyala"
    },
    "copied": {
      "en": "Copied",
      "text": "Kopyalandı"
    },
    "promptNote": {
      "en": "Paste it into an agent such as Claude Code or Cursor",
      "text": "Claude Code veya Cursor gibi bir Agent’a yapıştırın"
    },
    "install": {
      "en": "Copy install prompt",
      "text": "Kurulum istemini kopyala"
    },
    "installTitle": {
      "en": "Give this prompt to your agent: it installs the Skill, and can update it later",
      "text": "Bu istemi Agent’ınıza verin: Skill’i kurar ve daha sonra güncelleyebilir"
    },
    "installCopied": {
      "en": "Copied. Give it to your agent to install",
      "text": "Kopyalandı. Kurulum için Agent’ınıza verin"
    },
    "installPrompt": {
      "en": "(name, guide, mirror) => [\n\t\t`Please install the ${name} Skill for me, from Vibe Design Tips, so it works in every project and can be updated later.`,\n\t\t\"\",\n\t\t`Follow the steps in ${guide} and install ${name}.`,\n\t\t`If GitHub cannot be reached, use ${mirror} instead.`,\n\t\t\"\",\n\t\t\"If it is already installed, follow the update steps there. Then tell me the version and where you installed it.\"\n\t].join(\"\\n\")",
      "text": "(name, guide, mirror) => [\n\t\t\t`Lütfen ${name} Skill’ini benim için kur (Vibe Design Tips’ten); her projede çalışsın ve daha sonra güncellenebilsin.`,\n\t\t\t\"\",\n\t\t\t`${guide} adresindeki adımları izleyerek ${name} Skill’ini kur.`,\n\t\t\t`GitHub’a erişilemiyorsa bunun yerine ${mirror} adresini kullan.`,\n\t\t\t\"\",\n\t\t\t\"Zaten kuruluysa oradaki güncelleme adımlarını izle. Ardından sürümü ve nereye kurduğunu bana söyle.\"\n\t\t].join(\"\\n\")"
    },
    "copyFailed": {
      "en": "Copy failed",
      "text": "Kopyalanamadı"
    },
    "demo": {
      "en": "(name) => `${name} demo`",
      "text": "(name) => `${name} demosu`"
    },
    "reset": {
      "en": "Reset",
      "text": "Sıfırla"
    },
    "loadFailed": {
      "en": [
        "Could not load this tip. ",
        "Reload the page",
        " to try again."
      ],
      "text": [
        "Bu ipucu yüklenemedi. Tekrar denemek için ",
        "sayfayı yenileyin",
        "."
      ]
    },
    "viewOnX": {
      "en": "View the post on X",
      "text": "Gönderiyi X’te görüntüle"
    },
    "privacy": {
      "en": "Privacy",
      "text": "Gizlilik"
    },
    "close": {
      "en": "Close",
      "text": "Kapat"
    },
    "themeToggle": {
      "en": "Dark mode",
      "text": "Koyu mod"
    },
    "themeTip": {
      "en": "Dark mode",
      "text": "Koyu mod"
    },
    "themeTipDark": {
      "en": "Light mode",
      "text": "Açık mod"
    },
    "autoplayToggle": {
      "en": "Autoplay videos",
      "text": "Videoları otomatik oynat"
    },
    "autoplayTip": {
      "en": "Pause autoplay",
      "text": "Otomatik oynatmayı durdur"
    },
    "autoplayTipOff": {
      "en": "Autoplay videos",
      "text": "Videoları otomatik oynat"
    },
    "langSwitch": {
      "en": "Language",
      "text": "Dil"
    },
    "sideCollapse": {
      "en": "Collapse sidebar",
      "text": "Kenar çubuğunu daralt"
    },
    "sideExpand": {
      "en": "Expand sidebar",
      "text": "Kenar çubuğunu genişlet"
    },
    "menu": {
      "en": "Menu",
      "text": "Menü"
    },
    "community": {
      "en": "Join the community",
      "text": "Topluluğa katılın"
    },
    "projects": {
      "en": "Related work",
      "text": "İlgili çalışmalar"
    },
    "projectPrev": {
      "en": "Previous project",
      "text": "Önceki proje"
    },
    "projectNext": {
      "en": "Next project",
      "text": "Sonraki proje"
    },
    "readingTools": {
      "en": "Reading tools",
      "text": "Okuma araçları"
    },
    "textSize": {
      "en": "Text size",
      "text": "Metin boyutu"
    },
    "focus": {
      "en": "Focus mode",
      "text": "Odak modu"
    },
    "exitFocus": {
      "en": "Show the demo",
      "text": "Demoyu göster"
    },
    "prev": {
      "en": "Previous",
      "text": "Önceki"
    },
    "next": {
      "en": "Next",
      "text": "Sonraki"
    },
    "moreTips": {
      "en": "Previous and next tips",
      "text": "Önceki ve sonraki ipuçları"
    },
    "seriesStats": {
      "en": "(views, likes, bookmarks) => `The series on X: ${views} views, ${likes} likes, ${bookmarks} bookmarks`",
      "text": "(views, likes, bookmarks) => `Serinin X’teki sayıları: ${views} görüntülenme, ${likes} beğeni, ${bookmarks} yer işareti`"
    },
    "reads": {
      "en": "reads",
      "text": "okunma"
    },
    "likesSaves": {
      "en": "likes & saves",
      "text": "beğeni ve kayıt"
    },
    "follow": {
      "en": "Follow @kubai087 on X",
      "text": "X’te @kubai087 hesabını takip edin"
    },
    "readsAcross": {
      "en": "(n) => `Reads across ${n} posts`",
      "text": "(n) => `${n} gönderinin toplam okunma sayısı`"
    },
    "likesCount": {
      "en": [
        "",
        " likes"
      ],
      "text": [
        "",
        " beğeni"
      ]
    },
    "savesCount": {
      "en": [
        "",
        " saves"
      ],
      "text": [
        "",
        " kayıt"
      ]
    },
    "improve": {
      "en": "Improve translation",
      "text": "Çeviriyi iyileştir"
    },
    "improveNote": {
      "en": "To suggest corrections, download the text of this language, edit it, and send the file to {email}.",
      "text": "Düzeltme önermek için bu dilin metnini indirin, düzenleyin ve dosyayı {email} adresine gönderin."
    },
    "improveDone": {
      "en": "Download complete. Please send your corrections to i@kubai.design.",
      "text": "İndirme tamamlandı. Lütfen düzeltmelerinizi i@kubai.design adresine gönderin."
    }
  },
  "reader": {
    "size": {
      "en": "Text size",
      "text": "Metin boyutu"
    },
    "sizes": {
      "en": [
        "Default",
        "Large",
        "Larger"
      ],
      "text": [
        "Varsayılan",
        "Büyük",
        "Daha büyük"
      ]
    },
    "marks": {
      "en": "Selected text",
      "text": "Seçili metin"
    },
    "highlight": {
      "en": "Highlight",
      "text": "Vurgula"
    },
    "unhighlight": {
      "en": "Remove highlight",
      "text": "Vurguyu kaldır"
    },
    "marked": {
      "en": "Highlighted and saved. Find your highlights under Saved",
      "text": "Vurgulandı ve kaydedildi. Tüm vurgularınızı Kaydedilenler bölümünde bulabilirsiniz"
    },
    "unmarked": {
      "en": "Highlight removed",
      "text": "Vurgu kaldırıldı"
    },
    "copy": {
      "en": "Copy",
      "text": "Kopyala"
    },
    "quote": {
      "en": "Quote",
      "text": "Alıntı"
    },
    "copied": {
      "en": "Copied",
      "text": "Kopyalandı"
    },
    "quoted": {
      "en": "Quote copied",
      "text": "Alıntı kopyalandı"
    },
    "copyFailed": {
      "en": "Copy failed",
      "text": "Kopyalanamadı"
    },
    "colon": {
      "en": ": ",
      "text": ": "
    },
    "quoteText": {
      "en": "(words, title, url) => `“${words}”\\n— ${title}\\n${url}`",
      "text": "(words, title, url) => `“${words}”\\n— ${title}\\n${url}`"
    }
  },
  "account": {
    "saved": {
      "en": "Saved",
      "text": "Kaydedildi"
    },
    "unsaved": {
      "en": "Removed from saved",
      "text": "Kaydedilenlerden çıkarıldı"
    },
    "save": {
      "en": "Save",
      "text": "Kaydet"
    },
    "savedState": {
      "en": "Saved",
      "text": "Kaydedildi"
    },
    "unsave": {
      "en": "Remove from saved",
      "text": "Kaydedilenlerden çıkar"
    },
    "tooMany": {
      "en": "Too many requests. Try again in a moment.",
      "text": "Çok fazla istek gönderildi. Biraz sonra tekrar deneyin."
    },
    "saveFailed": {
      "en": "Could not save. Try again in a moment.",
      "text": "Kaydedilemedi. Biraz sonra tekrar deneyin."
    },
    "going": {
      "en": "(p) => `Going to ${p}…`",
      "text": "(p) => `${p} sayfasına yönlendiriliyorsunuz…`"
    },
    "signedOut": {
      "en": "Signed out",
      "text": "Çıkış yapıldı"
    },
    "account": {
      "en": "(name) => `Account: ${name}`",
      "text": "(name) => `Hesap: ${name}`"
    },
    "signIn": {
      "en": "Sign in",
      "text": "Giriş yap"
    },
    "signInTitle": {
      "en": "Sign in to vibedesign.tips",
      "text": "vibedesign.tips’e giriş yapın"
    },
    "signInLeads": {
      "en": {
        "save": "Signing in saves this tip.",
        "mark": "Signing in keeps this highlight and saves this tip.",
        "install": "Sign in to copy the install prompt.",
        "saved": "Sign in to see the tips you saved."
      },
      "text": {
        "save": "Giriş yaptığınızda bu ipucu kaydedilir.",
        "mark": "Giriş yaptığınızda bu vurgu korunur ve bu ipucu kaydedilir.",
        "install": "Kurulum istemini kopyalamak için giriş yapın.",
        "saved": "Kaydettiğiniz ipuçlarını görmek için giriş yapın."
      }
    },
    "expiredTitle": {
      "en": "Your sign-in has expired",
      "text": "Oturumunuzun süresi doldu"
    },
    "expiredLeads": {
      "en": {
        "save": "Please sign in again. This tip will then be saved.",
        "bundle": "Please sign in again to keep downloading the Skill.",
        "archive": "Please sign in again to keep downloading the full package.",
        "install": "Please sign in again to copy the install prompt.",
        "rename": "Please sign in again to edit your name."
      },
      "text": {
        "save": "Lütfen tekrar giriş yapın. Ardından bu ipucu kaydedilecek.",
        "bundle": "Skill’i indirmeye devam etmek için lütfen tekrar giriş yapın.",
        "archive": "Tam paketi indirmeye devam etmek için lütfen tekrar giriş yapın.",
        "install": "Kurulum istemini kopyalamak için lütfen tekrar giriş yapın.",
        "rename": "Adınızı düzenlemek için lütfen tekrar giriş yapın."
      }
    },
    "signInWith": {
      "en": "(p) => `Sign in with ${p}`",
      "text": "(p) => `${p} ile giriş yap`"
    },
    "lastUsed": {
      "en": "Last used",
      "text": "Son kullanılan"
    },
    "recommended": {
      "en": "Recommended",
      "text": "Önerilen"
    },
    "inAppNote": {
      "en": "(github) => `Google sign-in continues in your browser. If it doesn’t open, choose “Open in browser” from this app’s ··· menu${github ? ', or sign in with GitHub' : ''}.`",
      "text": "(github) => `Google ile giriş tarayıcınızda devam eder. Açılmazsa bu uygulamanın ··· menüsünden “Tarayıcıda aç”ı seçin${github ? ' ya da GitHub ile giriş yapın' : ''}.`"
    },
    "openingBrowser": {
      "en": "Opening your browser…",
      "text": "Tarayıcınız açılıyor…"
    },
    "browserNotOpened": {
      "en": "Could not open your browser",
      "text": "Tarayıcı açılamadı"
    },
    "member": {
      "en": "(n) => `Early member No. ${n}`",
      "text": "(n) => `${n}. erken üye`"
    },
    "plateTitle": {
      "en": "Early member plate",
      "text": "Erken üye plaketi"
    },
    "plateNote": {
      "en": "(max, n) => `A keepsake for the first ${max} people to support vibedesign.tips. You are No. ${n}.`",
      "text": "(max, n) => `vibedesign.tips’i destekleyen ilk ${max} kişiye bir hatıra. Siz ${n}. üyesiniz.`"
    },
    "plateOpen": {
      "en": "Click to see the member list",
      "text": "Üye listesini görmek için tıklayın"
    },
    "membersOpen": {
      "en": "See the member list",
      "text": "Üye listesini görüntüle"
    },
    "membersTitle": {
      "en": [
        "The first ",
        " members"
      ],
      "text": [
        "İlk ",
        " üye"
      ]
    },
    "membersLead": {
      "en": "(count, max) => (count >= max ? `All ${max} places are taken` : `${count} taken, ${max - count} left`)",
      "text": "(count, max) => (count >= max ? `${max} yerin tamamı doldu` : `${count} yer doldu, ${max - count} yer kaldı`)"
    },
    "membersYou": {
      "en": "(n) => `You are No. ${n}`",
      "text": "(n) => `Siz ${n}. üyesiniz`"
    },
    "membersSelf": {
      "en": "You",
      "text": "Siz"
    },
    "membersShow": {
      "en": "Show me on the list",
      "text": "Beni listede göster"
    },
    "membersShown": {
      "en": "You are on the list",
      "text": "Listede görünüyorsunuz"
    },
    "membersHidden": {
      "en": "You are off the list",
      "text": "Listede görünmüyorsunuz"
    },
    "membersPrivate": {
      "en": "Only you can see this",
      "text": "Bunu yalnızca siz görebilirsiniz"
    },
    "membersJoin": {
      "en": "Sign in to take a place",
      "text": "Yer almak için giriş yapın"
    },
    "membersAnonymous": {
      "en": "Anonymous kind soul",
      "text": "Adını vermeyen iyi biri"
    },
    "membersFailed": {
      "en": "Could not load the list. Try again in a moment.",
      "text": "Liste yüklenemedi. Biraz sonra tekrar deneyin."
    },
    "getAll": {
      "en": "Get all tips",
      "text": "Tüm ipuçlarını alın"
    },
    "getAllTitle": {
      "en": "Sign in to vibedesign.tips",
      "text": "vibedesign.tips’e giriş yapın"
    },
    "perks": {
      "en": [
        [
          "download",
          "Download every tip in one go"
        ],
        [
          "save",
          "Save the tips you like and highlight what matters"
        ],
        [
          "badge",
          "Join early and get an exclusive badge"
        ]
      ],
      "text": [
        [
          "download",
          "Tüm ipuçlarını tek seferde indirin"
        ],
        [
          "save",
          "Beğendiğiniz ipuçlarını kaydedin, önemli yerleri vurgulayın"
        ],
        [
          "badge",
          "Erken katılın, size özel bir rozet kazanın"
        ]
      ]
    },
    "consent": {
      "en": [
        "Free, keeps only your name and avatar. Signing in accepts the ",
        "Privacy Policy",
        "."
      ],
      "text": [
        "Ücretsizdir, yalnızca adınızı ve profil resminizi saklar. Giriş yaparak ",
        "Gizlilik Politikası",
        "’nı kabul etmiş olursunuz."
      ]
    },
    "separate": {
      "en": "Accounts from different sign-in methods don’t share saves",
      "text": "Farklı giriş yöntemlerinin hesapları kayıtları paylaşmaz"
    },
    "accountMenu": {
      "en": "Account",
      "text": "Hesap"
    },
    "providerAccount": {
      "en": "(p) => `Signed in with ${p}`",
      "text": "(p) => `${p} ile giriş yapıldı`"
    },
    "mySaved": {
      "en": "Saved",
      "text": "Kaydedilenler"
    },
    "signOut": {
      "en": "Sign out",
      "text": "Çıkış yap"
    },
    "editName": {
      "en": "Edit name",
      "text": "Adı düzenle"
    },
    "nameField": {
      "en": "Name",
      "text": "Ad"
    },
    "nameSaved": {
      "en": "Name updated",
      "text": "Ad güncellendi"
    },
    "nameInvalid": {
      "en": "(max) => `Use 1 to ${max} characters`",
      "text": "(max) => `1 ile ${max} karakter arasında olmalıdır`"
    },
    "nameFailed": {
      "en": "Could not change the name. Try again in a moment.",
      "text": "Ad değiştirilemedi. Biraz sonra tekrar deneyin."
    },
    "closed": {
      "en": "Sign-in is not open yet",
      "text": "Giriş henüz açık değil"
    },
    "savedSignIn": {
      "en": "Sign in to see the tips you saved",
      "text": "Kaydettiğiniz ipuçlarını görmek için giriş yapın"
    },
    "savedCount": {
      "en": "(n) => `${n} saved ${n === 1 ? 'tip' : 'tips'}`",
      "text": "(n) => `Kaydedilen ${n} ipucu`"
    },
    "seeAll": {
      "en": "See all",
      "text": "Tümünü gör"
    },
    "loginError": {
      "en": "Sign-in did not work. Please try again.",
      "text": "Giriş yapılamadı. Lütfen tekrar deneyin."
    },
    "loginCancelled": {
      "en": "Sign-in cancelled",
      "text": "Giriş iptal edildi"
    },
    "loginLimited": {
      "en": "Too many sign-ins. Try again in a moment.",
      "text": "Çok fazla giriş denemesi yapıldı. Biraz sonra tekrar deneyin."
    },
    "loginBusy": {
      "en": "Sign-in with X has reached its limit for now. Please sign in another way.",
      "text": "X ile giriş şimdilik sınıra ulaştı. Lütfen başka bir yolla giriş yapın."
    },
    "loginSaved": {
      "en": "Signed in, and this tip is saved",
      "text": "Giriş yapıldı ve bu ipucu kaydedildi"
    },
    "signedIn": {
      "en": "(name) => `Signed in as ${name}`",
      "text": "(name) => `${name} olarak giriş yapıldı`"
    },
    "colon": {
      "en": ": ",
      "text": ": "
    },
    "downloads": {
      "en": "Download everything",
      "text": "Tümünü indir"
    },
    "downloading": {
      "en": "Preparing…",
      "text": "Hazırlanıyor…"
    },
    "downloadFailed": {
      "en": "Could not download. Try again in a moment.",
      "text": "İndirilemedi. Biraz sonra tekrar deneyin."
    },
    "skillTile": {
      "en": "Skill",
      "text": "Skill"
    },
    "skillTileNote": {
      "en": "Everything",
      "text": "Tüm içerik"
    },
    "skillZip": {
      "en": "Or download the Skill as a ZIP",
      "text": "Ya da Skill’i ZIP olarak indir"
    },
    "skillVersion": {
      "en": "(v) => `Version ${v}`",
      "text": "(v) => `Sürüm ${v}`"
    },
    "changelog": {
      "en": "Changelog",
      "text": "Değişiklikler"
    },
    "changelogTitle": {
      "en": "Skill changelog",
      "text": "Skill değişiklikleri"
    },
    "changelogLead": {
      "en": "Every release of the Skill that holds everything. Each tip’s own Skill is on its page.",
      "text": "Tüm içeriği barındıran Skill’in her sürümü. Her ipucunun kendi Skill’i kendi sayfasındadır."
    },
    "changelogAdded": {
      "en": "Added",
      "text": "Eklenenler"
    },
    "changelogUpdated": {
      "en": "Updated",
      "text": "Güncellenenler"
    },
    "installCopied": {
      "en": "Install prompt copied. Give it to your agent",
      "text": "Kurulum istemi kopyalandı. Agent’ınıza verin"
    },
    "installPrompt": {
      "en": "(guide, mirror) => [\n        'Please install the kubai-design-tips Skill for me (every design tip from Vibe Design Tips), so it works in every project and can be updated later.',\n        '',\n        `Follow the steps in ${guide}`,\n        `If GitHub cannot be reached, use ${mirror} instead.`,\n        '',\n        'If it is already installed, follow the update steps there. Then tell me the version and where you installed it.',\n      ].join('\\n')",
      "text": "(guide, mirror) => [\n    'Lütfen kubai-design-tips Skill’ini benim için kur (Vibe Design Tips’teki tüm tasarım ipuçları); her projede çalışsın ve daha sonra güncellenebilsin.',\n    '',\n    `${guide} adresindeki adımları izle.`,\n    `GitHub’a erişilemiyorsa bunun yerine ${mirror} adresini kullan.`,\n    '',\n    'Zaten kuruluysa oradaki güncelleme adımlarını izle. Ardından sürümü ve nereye kurduğunu bana söyle.',\n  ].join('\\n')"
    },
    "copyFailed": {
      "en": "Could not copy. Try again in a moment.",
      "text": "Kopyalanamadı. Biraz sonra tekrar deneyin."
    },
    "skillStarted": {
      "en": "Download started",
      "text": "İndirme başladı"
    },
    "archiveTile": {
      "en": "Full package",
      "text": "Tam paket"
    },
    "archiveTileNote": {
      "en": "Videos and posts",
      "text": "Videolar ve gönderiler"
    },
    "archiveNew": {
      "en": "(n) => `Or only the ${n} ${n === 1 ? 'tip' : 'tips'} added or updated since your last download`",
      "text": "(n) => `Ya da yalnızca son indirmenden bu yana yeni veya güncellenen ${n} ipucu`"
    },
    "archiveUpToDate": {
      "en": "You already have every tip in the full package",
      "text": "Tam paketteki tüm ipuçları zaten sende"
    },
    "archiveStarted": {
      "en": "(size) => `Downloading the full package (${size}). Each tip has its video and its text in Chinese and English.`",
      "text": "(size) => `Tam paket indiriliyor (${size}). Her ipucunun videosu ile Çince ve İngilizce metni pakettedir.`"
    },
    "close": {
      "en": "Close",
      "text": "Kapat"
    },
    "community": {
      "en": "Join the community",
      "text": "Topluluğa katılın"
    },
    "communityKind": {
      "en": "Paid community",
      "text": "Ücretli topluluk"
    },
    "communityTitle": {
      "en": [
        "Join Vibe Design ",
        ""
      ],
      "text": [
        "Vibe Design ",
        " topluluğuna katılın"
      ]
    },
    "communityLead": {
      "en": "Good design friends, waiting for you to come and chat",
      "text": "İyi tasarımcı arkadaşlar sizinle sohbet etmeyi bekliyor"
    },
    "communityFree": {
      "en": "Every tutorial on this site is free for good, with careful updates to come. The community offers no extra lessons, but joining lets you:",
      "text": "Bu sitedeki tüm eğitimler sonsuza dek ücretsizdir ve özenle güncellenmeye devam eder. Toplulukta ek ders sunulmaz, ancak katıldığınızda şunları yapabilirsiniz:"
    },
    "communityPerks": {
      "en": [
        [
          "support",
          "Keep the free tips coming, and give me a little boost ✨"
        ],
        [
          "ask",
          "Ask Kubai anytime for free icon and product design advice"
        ],
        [
          "share",
          "More everyday design knowledge and resources"
        ],
        [
          "talk",
          "Meet great people building products, content and design"
        ],
        [
          "treat",
          "Buy Shubing the cat a can of treats 🐱"
        ]
      ],
      "text": [
        [
          "support",
          "Ücretsiz ipuçlarının devam etmesine destek olun, bana biraz güç verin ✨"
        ],
        [
          "ask",
          "Kubai’ye istediğiniz zaman soru sorun, ikon ve ürün tasarımı için ücretsiz tavsiye alın"
        ],
        [
          "share",
          "Günlük tasarım bilgisi ve kaynaklarından daha fazlası"
        ],
        [
          "talk",
          "Ürün, içerik ve tasarım üzerinde çalışan harika insanlarla tanışın"
        ],
        [
          "treat",
          "Kedi Shubing’e bir kutu mama alın 🐱"
        ]
      ]
    },
    "communityCat": {
      "en": [
        "Hi! I’m ",
        "Shubing",
        ". Thanks for the treats~"
      ],
      "text": [
        "Merhaba! Ben ",
        "Shubing",
        ". Mamalar için teşekkürler~"
      ]
    },
    "communityCurrency": {
      "en": "CN¥",
      "text": "CN¥"
    },
    "communityEarly": {
      "en": "Early bird",
      "text": "Erken kayıt fiyatı"
    },
    "communityWas": {
      "en": "Regular price ",
      "text": "Normal fiyat "
    },
    "communityEnds": {
      "en": "(date) => `Ends ${date}`",
      "text": "(date) => `Son gün: ${date}`"
    },
    "communityDaysLeft": {
      "en": "(n) => `${n} ${n === 1 ? 'day' : 'days'} left`",
      "text": "(n) => `${n} gün kaldı`"
    },
    "communityLastDay": {
      "en": "Ends today",
      "text": "Bugün sona eriyor"
    },
    "communityOnce": {
      "en": "Pay once, yours to keep",
      "text": "Bir kez ödeyin, sizde kalsın"
    },
    "communityScan": {
      "en": "Scan with WeChat to add me",
      "text": "Beni eklemek için WeChat ile tarayın"
    },
    "communityHow": {
      "en": "Add Kubai on WeChat, send the payment once accepted, and you’ll be invited to the group",
      "text": "WeChat’te Kubai’yi ekleyin, isteğiniz kabul edilince ödemeyi gönderin; ardından gruba davet edileceksiniz"
    },
    "communityHowTouch": {
      "en": "Press and hold to save the code, then open it from your photos in WeChat’s Scan to add Kubai. Once accepted, send the payment and you’ll be invited to the group",
      "text": "Kodu kaydetmek için basılı tutun, ardından WeChat’in Tara özelliğinde fotoğraflarınızdan açarak Kubai’yi ekleyin. İsteğiniz kabul edilince ödemeyi gönderin; ardından gruba davet edileceksiniz"
    },
    "communityQr": {
      "en": "WeChat QR code",
      "text": "WeChat QR kodu"
    }
  },
  "tags": {
    "motion": {
      "en": "Motion",
      "text": "Hareket"
    },
    "interaction": {
      "en": "Interaction",
      "text": "Etkileşim"
    },
    "components": {
      "en": "Components",
      "text": "Bileşenler"
    },
    "type": {
      "en": "Type & Layout",
      "text": "Tipografi ve düzen"
    },
    "effects": {
      "en": "Effects",
      "text": "Görsel efektler"
    }
  },
  "stats": {
    "views": {
      "en": "views",
      "text": "görüntülenme"
    },
    "likes": {
      "en": "likes",
      "text": "beğeni"
    },
    "bookmarks": {
      "en": "bookmarks",
      "text": "yer işareti"
    },
    "replies": {
      "en": "replies",
      "text": "yanıt"
    },
    "source": {
      "en": "Post on X",
      "text": "X’teki gönderi"
    }
  },
  "titles": {
    "021-ring-cards": {
      "en": "Ring cards with depth and a fluid gradient",
      "text": "Derinlikli halka kartlar ve akışkan gradyan"
    },
    "020-choice-controls": {
      "en": "Diagnosing and fixing choice controls",
      "text": "Seçim kontrollerini teşhis etme ve düzeltme"
    },
    "019-scroll-cards": {
      "en": "Five card interactions driven by scrolling",
      "text": "Kaydırmayla çalışan beş kart etkileşimi"
    },
    "018-holo-card": {
      "en": "Holographic cards that tilt and turn over",
      "text": "Eğilen ve ters dönen holografik kartlar"
    },
    "017-loading-states": {
      "en": "Diagnosing and fixing loading states",
      "text": "Yükleme durumlarını teşhis etme ve düzeltme"
    },
    "016-toast-or-notification": {
      "en": "Toasts or notifications: how to choose",
      "text": "Toast mı, bildirim mi: nasıl seçilir"
    },
    "015-ui-continuity": {
      "en": "Diagnosing and fixing UI continuity",
      "text": "Arayüz sürekliliğini teşhis etme ve düzeltme"
    },
    "014-card-delete": {
      "en": "Four ways for a deleted card to disappear",
      "text": "Silinen bir kartın kaybolmasının dört yolu"
    },
    "013-shockwave-glow": {
      "en": "A shockwave halo",
      "text": "Şok dalgası halesi"
    },
    "012-message-bubbles": {
      "en": "Material and motion for message bubbles",
      "text": "Mesaj balonları için malzeme ve hareket"
    },
    "011-easing-curves": {
      "en": "Choosing easing curves by situation",
      "text": "Duruma göre yumuşatma eğrisi seçimi"
    },
    "010-liquid-glass": {
      "en": "Liquid glass",
      "text": "Sıvı cam"
    },
    "009-overlays": {
      "en": "Rules for choosing an overlay",
      "text": "Açılır katman seçme kuralları"
    },
    "008-wiki-layout": {
      "en": "A wiki layout for desktop and mobile",
      "text": "Masaüstü ve mobil için wiki düzeni"
    },
    "007-type-switches": {
      "en": "CSS for mixed Chinese and English type",
      "text": "Çince ve İngilizce karışık metin için CSS"
    },
    "006-book-cards": {
      "en": "Cards that open like a book on hover",
      "text": "Üzerine gelindiğinde kitap gibi açılan kartlar"
    },
    "005-drag-ripple": {
      "en": "Drag to reorder, with items making way",
      "text": "Öğelerin yer açtığı sürükleyerek sıralama"
    },
    "004-continuous-corners": {
      "en": "Nested corners and continuous corners",
      "text": "İç içe köşeler ve sürekli eğrilikli köşeler"
    },
    "003-ascii-dither": {
      "en": "ASCII and dither effects",
      "text": "ASCII ve dithering efektleri"
    },
    "002-cascade-menu": {
      "en": "Safe areas and delays for cascading menus",
      "text": "Basamaklı menülerde güvenli alan ve gecikmeler"
    },
    "001-skeuomorphic-buttons": {
      "en": "Skeuomorphic buttons that press in",
      "text": "Basıldığında aşağı inen skeuomorfik düğmeler"
    }
  },
  "tips": {
    "001-skeuomorphic-buttons": {
      "en": {
        "summary": "Tactile skeuomorphic buttons: five variants, five material layers, and lighting that changes on hover and press. For dashboards and tools.",
        "notes": "<p>A flat button usually just turns slightly darker when pressed, which is barely visible during a quick click. A skeuomorphic button sinks when pressed, with its position, gradient and shadows changing together, so the user can tell the press registered. The key points are these five:</p>\n        <ol>\n        <li><strong>Five variants</strong>: For dashboards, editors and settings pages with many buttons and few colors, where primary and secondary can only be told apart by light, shade and material. From strongest to weakest: primary is a dark slate key, secondary a raised white key, tertiary a light gray key, ghost has no face at rest, and text is just a label with a thin underline. Use only one primary per area.</li>\n        <li><strong>Five material layers</strong>: The three filled variants are built from the same five layers: a gradient face 6–8% lighter at the top, a 1px border one step darker than the bottom of the gradient, a white highlight along the top, a dark line along the bottom, and a two-layer shadow made of a contact shadow and a soft drop shadow. The variants differ only in their values, so define the five layers as one set of tokens and let each variant assign its own.</li>\n        <li><strong>Hover and press</strong>: On hover the face gets one step lighter and the drop shadow grows. On press the button moves down 1px, the gradient flips, the drop shadow tightens until it almost touches the surface, and the top highlight becomes an inner shadow. The rest and pressed states need the same number of inset shadow layers, with transparent shadows filling any gap, for the shadows to change smoothly.</li>\n        <li><strong>Light and color</strong>: The light source is fixed straight above, so the highlight is always at the top and the dark line always at the bottom, and the whole set looks as if it sits in the same space. Use only neutral grays, no brand colors, and separate the variants by light and shade; no gloss, outer glow or large blurs either.</li>\n        <li><strong>Scale with the label</strong>: Height, padding, radius, border, and the offset and blur of every shadow layer are all written as multiples of the unit u = label size / 14. With a 14px label u = 1px and the button is 40px tall; with a 16px label u ≈ 1.14px, the button is about 45.7px tall, and the shadows grow in the same proportion.</li>\n        </ol>\n        <h2>Parameters</h2>\n        <dl class=\"params\">\n        <dt>Size</dt><dd>Label 14px; height 40px; radius 10px; horizontal padding 18px</dd>\n        <dt>Pressed</dt><dd>Moves down 1px; drop shadow collapses to 0 1px 1px</dd>\n        <dt>Timing</dt><dd>Transform 120ms; shadows 140ms; colors 160ms</dd>\n        </dl>\n        <p>The included prompt restyles the project’s existing button component first, keeping its API and accessibility settings; it creates a new one only if the project has no button component.</p>"
      },
      "text": {
        "summary": "Tıklama hissi veren skeuomorfik düğmeler: beş düzey, beş malzeme katmanı, üzerine gelme ve basmada ışık ve gölge; yönetim panelleri ve araç tipi ürünler için.",
        "notes": "<p>Düz bir düğmeye basıldığında genellikle yalnızca rengi biraz koyulaşır ve hızlı tıklamalarda bu neredeyse fark edilmez; skeuomorfik bir düğme ise basıldığında aşağı iner, konumu, gradyanı ve gölgesi birlikte değişir, kullanıcı tıklamanın gerçekleştiğinden emin olur. Başlıca beş nokta şunlardır:</p>\n        <ol>\n        <li><strong>Beş düzey</strong>: düğmesi çok, rengi az olan yönetim panelleri, düzenleyiciler ve ayar sayfaları için uygundur; öncelik yalnızca açıklık-koyuluk ve malzemeyle ayırt edilir. Güçlüden zayıfa: primary koyu arduvaz renkli bir tuş, secondary yüksekte duran beyaz bir tuş, tertiary açık gri bir tuş, ghost normalde zeminsiz, text yalnızca metin ve ince bir alt çizgi; aynı alanda yalnızca bir primary bulunur.</li>\n        <li><strong>Beş malzeme katmanı</strong>: zemini olan üç düzeyin hepsi aynı beş katmandan oluşur: üstte %6–8 daha açık bir gradyan yüzey, gradyanın alt renginden bir ton koyu 1px kenar, üstte beyaz bir parlak çizgi, altta koyu bir çizgi ve yüzeye yapışık bir gölge ile yumuşak bir düşen gölgeden oluşan iki katman. Düzeyler arasında yalnızca değerler farklıdır; beş katman tek bir token grubu olarak tanımlanır, her düzey kendi değerlerini verir.</li>\n        <li><strong>Üzerine gelme ve basma</strong>: üzerine gelindiğinde tuş yüzeyi bir ton açılır, düşen gölge büyür. Basıldığında 1px aşağı iner, gradyan ters döner, düşen gölge neredeyse yüzeye yapışacak kadar daralır ve üstteki parlak çizgi bir iç gölgeye dönüşür. Normal ve basılı durumlarda iç gölge katman sayısı aynı olmalı, eksikler saydam gölgelerle tamamlanmalıdır; gölge ancak o zaman yumuşakça geçer.</li>\n        <li><strong>Işık ve renk</strong>: ışık kaynağı sabit olarak tam yukarıdadır; parlak çizgi her zaman üstte, koyu çizgi her zaman altta olur ve bütün düğmeler aynı mekândaymış gibi görünür. Marka rengi değil, yalnızca nötr griler kullanılır, düzeyler açıklık-koyulukla ayrılır; ayna gibi parlaklıklar, dış ışımalar ve geniş bulanıklıklar da kullanılmaz.</li>\n        <li><strong>Yazı boyutuyla ölçekleme</strong>: yükseklik, iç boşluk, köşe yarıçapı, kenarlık ve her gölge katmanının kayması ile bulanıklığı, u = yazı boyutu / 14 biriminin katları olarak yazılır. 14px metinde u = 1px ve düğme 40px yüksekliğindedir; 16px metinde u ≈ 1.14px, düğme yaklaşık 45.7px yüksekliğindedir ve gölgeler aynı oranda büyür.</li>\n        </ol>\n        <h2>Parametreler</h2>\n        <dl class=\"params\">\n        <dt>Boyut</dt><dd>Etiket 14px; yükseklik 40px; köşe yarıçapı 10px; yatay iç boşluk 18px</dd>\n        <dt>Basılı</dt><dd>1px aşağı iner; düşen gölge 0 1px 1px değerine daralır</dd>\n        <dt>Zamanlama</dt><dd>Transform 120ms; gölgeler 140ms; renkler 160ms</dd>\n        </dl>\n        <p>Ekteki Prompt öncelikle projede zaten var olan düğme bileşenini dönüştürür, mevcut arayüzünü ve erişilebilirlik ayarlarını korur; projede düğme bileşeni yoksa ancak o zaman yenisini oluşturur.</p>"
      }
    },
    "002-cascade-menu": {
      "en": {
        "summary": "A safe triangle and three delays for cascading menus, so a diagonal move toward a submenu does not switch or close it by mistake.",
        "notes": "<p>On its way diagonally from a parent menu to a submenu, the pointer inevitably crosses the rows below. A plain menu switches to whichever row the pointer crosses, the submenu disappears, and the user has to go back and open it again. Four rules solve this:</p>\n        <ol>\n        <li><strong>Safe triangle</strong>: Used while a submenu is open and the pointer is moving toward it. Take the pointer’s previous position as one corner and connect it to the top and bottom corners of the submenu’s near side to form a triangle. While the pointer is inside, the rows it crosses do not highlight or open their own submenus; only when it leaves the triangle does the menu switch to the current row.</li>\n        <li><strong>Switch delay</strong>: If the pointer rests on a row inside the triangle, the user wants that row. After it stays there for more than 1.2 seconds, the menu switches to that row, so the submenu does not stay unchanged for too long.</li>\n        <li><strong>Open delay</strong>: For a pointer sweeping quickly down a menu. A submenu opens only after 220ms of hover and is canceled if the pointer leaves earlier, so a string of submenus does not open one after another; a tap on a touchscreen takes effect immediately.</li>\n        <li><strong>Close delay</strong>: For a pointer that slips slightly past the menu’s edge. The menu closes only 360ms after the pointer leaves, and stays as it is if the pointer comes back in time; a click outside the menu closes it immediately.</li>\n        </ol>\n        <p>Also, row highlighting is controlled by component state, not CSS <code>:hover</code>; otherwise the rows crossed inside the triangle still light up even when the menu does not switch.</p>\n        <p>The included prompt adds these rules to the project’s existing menu component, keeping its API and keyboard support; it creates a new one only if the project has no menu component.</p>"
      },
      "text": {
        "summary": "Basamaklı menülerde güvenli üçgen alan ve üç gecikme; imleç alt menüye çapraz giderken alt menü yanlışlıkla değişmez ya da birden kapanmaz.",
        "notes": "<p>İmleç üst menüden alt menüye çapraz giderken alttaki birkaç satırın üzerinden geçmesi kaçınılmazdır. Sıradan bir menü imlecin geçtiği her satıra geçer, alt menü kaybolur ve kullanıcı geri dönüp onu yeniden açmak zorunda kalır. Çözüm dört kuraldan oluşur:</p>\n        <ol>\n        <li><strong>Güvenli üçgen alan</strong>: alt menü açıkken ve imleç ona doğru ilerlerken kullanılır. İmlecin bir önceki andaki konumu tepe noktası alınır ve alt menünün yakın kenarındaki üst ve alt köşelere birleştirilerek bir üçgen oluşturulur; imleç üçgenin içindeyken geçtiği satırlar vurgulanmaz ve kendi alt menülerini açmaz, menü ancak imleç üçgenden çıkınca geçerli satıra geçer.</li>\n        <li><strong>Geçiş gecikmesi</strong>: imleç üçgenin içinde bir satırda duruyorsa kullanıcı o satırı seçmek istiyordur. 1.2 saniyeden uzun kalırsa menü bu satıra geçer; alt menü uzun süre değişmeden beklemez.</li>\n        <li><strong>Açılma gecikmesi</strong>: imlecin bir menü sütununun üzerinden hızla geçtiği durumlar içindir. Alt menü ancak 220ms üzerinde kalındıktan sonra açılır, imleç daha önce ayrılırsa açılma iptal edilir; böylece art arda bir dizi alt menü açılmaz. Dokunmatik ekranda dokunma hemen etkili olur.</li>\n        <li><strong>Kapanma gecikmesi</strong>: imlecin menü kenarının biraz dışına çıktığı durumlar içindir. Menü, imleç ayrıldıktan 360ms sonra kapanır; imleç zamanında geri dönerse olduğu gibi kalır. Menünün dışına tıklamak onu hemen kapatır.</li>\n        </ol>\n        <p>Ayrıca satır vurgusu CSS’in <code>:hover</code> seçicisiyle değil, bileşen durumuyla yönetilir; aksi halde menü geçiş yapmasa bile üçgen alanda üzerinden geçilen satırlar yine vurgulanır.</p>\n        <p>Ekteki Prompt bu kuralları projedeki mevcut menü bileşenine ekler, arayüzünü ve klavye kullanımını korur; projede menü bileşeni yoksa ancak o zaman yenisini oluşturur.</p>"
      }
    },
    "003-ascii-dither": {
      "en": {
        "summary": "ASCII and Dither effects for images and videos on login pages, websites or cards, with a strength you can adjust at any time.",
        "notes": "<p>ASCII and Dither redraw an image as characters or a pixel texture by brightness, keeping its light and dark structure and dropping the photo’s detail. Every parameter can be adjusted, so the same image can serve as the main visual or recede into the background as a texture. The key points are these five:</p>\n        <ol>\n        <li><strong>ASCII</strong>: Suits a terminal or code look, such as the login page of a developer tool. The image is cut into a grid, and each cell is replaced by a character according to its brightness, from “.” to “@” as it gets denser; size is the font size, spacing is how dense the grid is, and sampling strength is the contrast.</li>\n        <li><strong>Dither</strong>: Suits the look of halftone print or pixel grain. The image is cut into pixel blocks, and a 4×4 Bayer matrix serves as the thresholds that reduce each color to a few levels, which blend into intermediate tones from a distance; size is the pixel block, spacing is the scale of the texture, and the higher the sampling strength, the fewer the color levels and the heavier the grain.</li>\n        <li><strong>Mask</strong>: Applies to both effects. A vertical gradient laid over the image pushes it back, so the effect reads more as texture than as noise; when the effect gets in the way of the text on top, raise the mask first.</li>\n        <li><strong>Sample tones</strong>: ASCII only. It decides whether characters are drawn in the shadows or the highlights; choose by the tones where the subject sits. In a city at night the subject is the lights, so sample the highlights; for a dark product photo on white, sample the shadows.</li>\n        <li><strong>Color</strong>: Keep the original colors, or pick one of five palettes. The image’s light and dark are first mapped onto that palette before the effect is generated, so different images keep a consistent style.</li>\n        </ol>\n        <h2>Parameters</h2>\n        <dl class=\"params\">\n        <dt>ASCII</dt><dd>Mask 90; sample tones Shadows; sampling strength 100; size 37; spacing 0</dd>\n        <dt>Dither</dt><dd>Mask 88; sampling strength 100; size 15; spacing 0</dd>\n        </dl>\n        <p>The included prompt first confirms which image or video to process, then generates the effect for it and adds a panel beside it for adjusting the parameters live.</p>"
      },
      "text": {
        "summary": "Giriş sayfalarındaki, web sitelerindeki ve kartlardaki görsellere ve videolara ASCII ve Dither efekti ekleyin; efektin gücü istendiği zaman ayarlanabilir.",
        "notes": "<p>ASCII ve Dither görüntüyü parlaklığa göre karakterlerle ya da piksel dokusuyla yeniden çizer; açık-koyu yapıyı korur, fotoğrafın ayrıntılarını atar. Tüm parametreler ayarlanabildiği için aynı görsel hem ana görsel olabilir hem de arka plana çekilip doku olarak kullanılabilir. Başlıca beş nokta şunlardır:</p>\n        <ol>\n        <li><strong>ASCII</strong>: terminal ve kod havası için uygundur, örneğin bir geliştirici aracının giriş sayfası. Görüntü bir ızgaraya bölünür ve her hücre parlaklığına göre bir karakterle değiştirilir; karakterler “.” karakterinden “@” karakterine doğru yoğunlaşır. Boyut yazı tipi boyutudur, aralık ızgaranın sıklığıdır, örnekleme gücü açık-koyu kontrastıdır.</li>\n        <li><strong>Dither</strong>: baskıdaki yarım ton noktaları ya da piksel tanecikleri havası için uygundur. Görüntü piksel bloklarına bölünür, 4×4 Bayer matrisi eşik olarak kullanılır ve her renk birkaç seviyeye indirilir; uzaktan bakıldığında bunlar karışarak ara gri tonları oluşturur. Boyut piksel bloğudur, aralık desenin ölçeğidir; örnekleme gücü arttıkça renk seviyesi azalır, tanecik hissi belirginleşir.</li>\n        <li><strong>Maske</strong>: iki efekt için de geçerlidir. Görüntünün üzerine dikey bir gradyan katmanı eklenir; görüntü geri çekilir ve efekt gürültüden çok doku gibi görünür. Efekt üstteki metni bozuyorsa önce maskeyi artırın.</li>\n        <li><strong>Örneklenen bölge</strong>: yalnızca ASCII için geçerlidir; karakterlerin gölgeleri mi yoksa parlak alanları mı çizeceğini belirler ve görüntünün ana öğesinin bulunduğu ton aralığına göre seçilir. Şehir gece manzarasında ana öğe ışıklardır, parlak alanlar örneklenir; beyaz zemin üzerindeki koyu bir ürün fotoğrafında gölgeler örneklenir.</li>\n        <li><strong>Renk tonu</strong>: özgün renkler korunabilir ya da beş paletten biri seçilebilir; görselin açık-koyu değerleri önce bu palete eşlenir, sonra efekt üretilir. Böylece farklı görsellerin stili tutarlı kalır.</li>\n        </ol>\n        <h2>Parametreler</h2>\n        <dl class=\"params\">\n        <dt>ASCII</dt><dd>Maske 90; örnek tonlar Gölgeler; örnekleme gücü 100; boyut 37; aralık 0</dd>\n        <dt>Dithering</dt><dd>Maske 88; örnekleme gücü 100; boyut 15; aralık 0</dd>\n        </dl>\n        <p>Ekteki Prompt önce hangi görselin ya da videonun işleneceğini sorar, ardından ona efekti uygular ve yanına gerçek zamanlı ayarlanabilen bir parametre paneli ekler.</p>"
      }
    },
    "004-continuous-corners": {
      "en": {
        "summary": "How to work out nested corner radii level by level, and when to switch to continuous corners, so corners on cards and forms look neater.",
        "notes": "<p>Take a card with a 16px radius and 8px padding: if the button inside also has a 16px radius, the gap between the two borders is wider at the corner than along the straight edges, and the button does not look like it fits the card. Where a larger radius meets a straight edge, a crease also shows. Four rules:</p>\n        <ol>\n        <li><strong>Even inset</strong>: For places with an inner and an outer layer of rounded corners, such as forms, nested cards and dialogs. Calculate every layer as “inner radius = outer radius − padding”, so the inner and outer corners share a center and the gap at the corner matches the gap along the straight edges. With a card radius of 16 and padding of 8, the button inside gets a radius of 8.</li>\n        <li><strong>Several levels</strong>: With three or more levels, calculate from the outside in, one level at a time. For a dialog with radius 32 and padding 16, the panels and buttons inside get 16; a tag inset by another 8 inside a panel gets 8. Elements at the same level share one radius, and no radius goes below 4.</li>\n        <li><strong>Pills and circles</strong>: Pill-shaped and circular elements nested in a container are left out of the calculation and always stay fully round.</li>\n        <li><strong>Continuous corners</strong>: For large radii where a crease shows at the join, or when you want something close to the look of iOS corners. A plain rounded corner changes curvature abruptly where it meets the straight edge; a continuous corner (superellipse) increases the curvature gradually, for a smoother transition. Write it as <code>border-radius: 32px; corner-shape: superellipse(1.25);</code></li>\n        </ol>\n        <p>Also, <code>corner-shape</code> is currently supported only in Chrome and Edge 139 and later; Safari and Firefox fall back to plain rounded corners on their own, with nothing extra to handle.</p>\n        <p>The included prompt recalculates the radii of the interface you specify, from the outside in; if the project has radius tokens, it changes the tokens directly.</p>"
      },
      "text": {
        "summary": "İç içe köşe yarıçaplarının katman katman hesaplanması ve sürekli eğrilikli köşelere ne zaman geçileceği; kart ve form köşeleri daha düzgün görünür.",
        "notes": "<p>Köşe yarıçapı 16px, iç boşluğu 8px olan bir kartın içindeki düğme de 16px yarıçap kullanırsa, köşede iki kenarlık arasındaki mesafe düz kenarlardakinden geniş olur ve düğme karta oturmamış görünür; büyük bir yarıçapın düz kenarla birleştiği yerde ayrıca bir kırılma çizgisi belirir. Yöntem dört kuraldan oluşur:</p>\n        <ol>\n        <li><strong>Eşit iç mesafe</strong>: formlar, iç içe kartlar ve iletişim kutuları gibi iç ve dış iki katman yuvarlak köşenin bulunduğu yerlerde kullanılır. Her katman “iç yarıçap = dış yarıçap − boşluk” ile hesaplanır; iç ve dış köşe aynı merkezi paylaşınca köşedeki mesafe düz kenardakiyle aynı olur. Kartın yarıçapı 16, iç boşluğu 8 ise içteki düğmenin yarıçapı 8’dir.</li>\n        <li><strong>Çok katmanlı iç içe yapı</strong>: üç ya da daha fazla katmanda dıştan içe doğru katman katman hesaplanır. İletişim kutusunun yarıçapı 32, iç boşluğu 16 ise içteki panel ve düğmeler 16 olur; panelin içinde 8 içeride duran bir etiket 8 olur. Aynı katmandaki öğeler aynı yarıçapı paylaşır ve yarıçap 4’ün altına inmez.</li>\n        <li><strong>Hap ve daire</strong>: bir kabın içindeki hap biçimli ve yuvarlak öğeler hesaba katılmaz, her zaman tam yuvarlak kalır.</li>\n        <li><strong>Sürekli eğrilikli köşeler</strong>: yarıçap büyük olduğunda ve birleşme yerindeki kırılma görülebildiğinde ya da iOS köşelerine yakın bir görünüm istendiğinde kullanılır. Normal köşede eğrilik düz kenara geçerken birden değişir; sürekli eğrilikli köşe (superellipse) eğriliği yavaş yavaş artırır ve geçiş daha yumuşak olur. Yazımı: <code>border-radius: 32px; corner-shape: superellipse(1.25);</code></li>\n        </ol>\n        <p>Ayrıca <code>corner-shape</code> şu anda yalnızca Chrome ve Edge’in 139 ve üzeri sürümlerinde destekleniyor; Safari ve Firefox otomatik olarak normal yuvarlak köşelere döner, ek bir işlem gerekmez.</p>\n        <p>Ekteki Prompt belirttiğiniz arayüzün köşe yarıçaplarını dıştan içe yeniden hesaplar; projede köşe yarıçapı token’ları varsa doğrudan token’ları değiştirir.</p>"
      }
    },
    "005-drag-ripple": {
      "en": {
        "summary": "The cursor, drop line and the way nearby items make room in drag to reorder, for lists, kanban boards and horizontal rows.",
        "notes": "<p>In many drag-to-reorder lists the other items stay still during the drag and the list rearranges abruptly on release, so the user can only check which two items it landed between afterward. These five rules let the user see the result before releasing:</p>\n        <ol>\n        <li><strong>Cursor</strong>: Set it on every draggable element. Show a hand on hover and a grabbing hand while dragging, so the user knows the element can be dragged before pressing.</li>\n        <li><strong>Dragged item</strong>: Follows the pointer while staying clear of the drop point, so it does not cover the drop line. In a horizontal row it lifts upward; in a vertical list it moves to one side and shrinks to about 90%. Its original slot closes up.</li>\n        <li><strong>Drop line</strong>: Marks the drop point. It is a very faint thin line at about 15% of the text color, vertical in a row and horizontal in a list. It grows from the middle out to both ends when it appears, slides over when the drop point changes, and is not shown at the item’s original position.</li>\n        <li><strong>Making way</strong>: The items on both sides of the drop line move outward, and the closer they are, the further and earlier they move: offset = 10px × 0.7ⁿ, delay = 24ms × n, where n is the number of items between an item and the drop line, 0 for the ones right next to it. Icons start from 10px, cards from 8px.</li>\n        <li><strong>Drop and cancel</strong>: On release, the item moves into the gap and the other items spring to their new positions; pressing Esc or releasing outside the list cancels, and every item returns to where it was.</li>\n        </ol>\n        <p>Also, move items only with transform, without changing the layout; reordering must also be possible from the keyboard; with “Reduce motion” on, keep only the drop line.</p>\n        <h2>Parameters</h2>\n        <dl class=\"params\">\n        <dt>Offset</dt><dd>Icons 10px; cards 8px; × 0.7 for each item further out</dd>\n        <dt>Delay</dt><dd>+24ms for each item further out</dd>\n        <dt>Spring</dt><dd>Barely overshoots; settles in about 0.25s</dd>\n        <dt>Drop line</dt><dd>About 15% of the text color</dd>\n        </dl>\n        <p>The included prompt reuses the project’s existing drag logic and adds these effects to the lists, rows and docks you specify.</p>"
      },
      "text": {
        "summary": "Sürükleyerek sıralamada imleç, bırakma noktasını gösteren çizgi ve iki yandaki öğelerin kenara çekilme hareketi; listeler, kanban panoları ve yatay diziler için.",
        "notes": "<p>Birçok sürükleyerek sıralamada sürükleme sırasında diğer öğeler yerinden kımıldamaz, bırakınca liste birden yeniden dizilir; öğenin hangi ikisinin arasına düştüğü ancak bıraktıktan sonra kontrol edilebilir. Aşağıdaki beş kural, kullanıcının sonucu bırakmadan önce görmesini sağlar:</p>\n        <ol>\n        <li><strong>İmleç</strong>: sürüklenebilen her öğeye ayarlanır. Üzerine gelindiğinde el imleci, sürükleme sırasında kavrayan el imleci gösterilir; kullanıcı basmadan önce öğenin sürüklenebildiğini anlar.</li>\n        <li><strong>Sürüklenen öğe</strong>: imleci izler, aynı zamanda bırakma noktasından uzak durur ve bırakma çizgisini kapatmaz. Yatay dizide yukarı kalkar; dikey listede bir yana kayar ve yaklaşık %90’a küçülür. Eski yeri de kapanır.</li>\n        <li><strong>Bırakma çizgisi</strong>: bırakma noktasını gösterir; çok soluk ince bir çizgidir, rengi metin renginin yaklaşık %15’idir. Yatay dizide dikey, listede yataydır; belirirken ortadan iki uca açılır, bırakma noktası değişince oraya kayar ve öğenin eski yerinde gösterilmez.</li>\n        <li><strong>Kenara çekilme</strong>: çizginin iki yanındaki öğeler dışarı doğru çekilir; çizgiye ne kadar yakınsa o kadar çok ve o kadar erken hareket eder: kayma = 10px × 0.7ⁿ, gecikme = 24ms × n; n çizgiyle arasındaki öğe sayısıdır, hemen bitişikteki için 0’dır. Simgeler 10px’ten, kartlar 8px’ten başlar.</li>\n        <li><strong>Bırakma ve iptal</strong>: bırakıldığında öğe boşluğa yerleşir, diğer öğeler yay hareketiyle yeni konumlarına geçer; Esc’ye basmak ya da listenin dışında bırakmak iptal sayılır ve bütün öğeler eski yerlerine döner.</li>\n        </ol>\n        <p>Ayrıca öğeler yalnızca transform ile taşınır, düzen değiştirilmez; sıralama klavyeyle de yapılabilmelidir; “Hareketi azalt” açıkken yalnızca bırakma çizgisi kalır.</p>\n        <h2>Parametreler</h2>\n        <dl class=\"params\">\n        <dt>Kayma</dt><dd>Simgeler 10px; kartlar 8px; her uzak öğe için × 0.7</dd>\n        <dt>Gecikme</dt><dd>Her uzak öğe için +24ms</dd>\n        <dt>Yay</dt><dd>Hedefi çok az aşar; yaklaşık 0.25s’de oturur</dd>\n        <dt>Bırakma çizgisi</dt><dd>Metin renginin yaklaşık %15’i</dd>\n        </dl>\n        <p>Ekteki Prompt projedeki mevcut sürükleme mantığını yeniden kullanarak bu efekti belirttiğiniz listelere, satırlara ve dock’lara ekler.</p>"
      }
    },
    "006-book-cards": {
      "en": {
        "summary": "Cards that open like a book: ordinary cards at rest that open slightly on hover to show the pages inside, in three styles.",
        "notes": "<p>In AI-generated products, cards are the element most likely to look alike. A book card keeps its usual look at rest and, on hover or focus, opens slightly like a small book to show a few pages inside. The key points are these four:</p>\n        <ol>\n        <li><strong>Structure</strong>: Suits cards that stand for content, such as documents, knowledge-base articles, templates and portfolio items; a card like “Settings” that is only an entry point has no pages inside and does not fit. The card is a stack of a cover, 4 pages and a back board that opens around its left edge; at rest all layers line up exactly.</li>\n        <li><strong>Timing</strong>: The cover opens the most, and each layer further in opens less and later: angle = 42° × 0.7ⁿ, delay = 28ms × n. The layers come to about 42°, 29°, 21° and 14°; when the pointer leaves, they close in reverse order, innermost page first.</li>\n        <li><strong>Light and shading</strong>: Light comes from above, and the shadow falls below the card. The shadow is two solid shapes that stretch downward and soften as the card opens; each page casts a shadow on the next until the two separate. Do not use <code>box-shadow</code>: it is a hollow ring, and its outline shows once the cover opens.</li>\n        <li><strong>Three styles</strong>: Default keeps the product’s existing card style and suits ordinary product cards; Skeuomorphic looks like a hardcover book on a gallery wall, with a book-cloth texture and a warm gray shadow; Minimal looks like a set of technical documents, with a flat light cover and thin line illustrations.</li>\n        </ol>\n        <p>Also, opening affects only the card itself: its size and position stay the same, and the surrounding cards and layout do not move.</p>\n        <h2>Parameters</h2>\n        <dl class=\"params\">\n        <dt>Angle</dt><dd>Cover 42°; × 0.7 for each layer further in</dd>\n        <dt>Delay</dt><dd>+28ms for each layer further in</dd>\n        <dt>Pages</dt><dd>4; hinged on the left edge</dd>\n        </dl>\n        <p>The included prompt first confirms the style, number of pages and opening direction, then restyles the project’s existing cards.</p>"
      },
      "text": {
        "summary": "Kitap gibi açılan kartlar: normalde sıradan kartlar gibi görünür, üzerine gelindiğinde biraz açılıp iç sayfaları gösterir; üç stil arasından seçim yapılabilir.",
        "notes": "<p>AI ile üretilen ürünlerde birbirine en çok benzeyen şey kartlardır. Kitap kartı normalde olduğu gibi durur; üzerine gelindiğinde ya da odaklandığında küçük bir kitap gibi biraz açılır ve içindeki birkaç sayfayı gösterir. Başlıca dört nokta şunlardır:</p>\n        <ol>\n        <li><strong>Yapı</strong>: belgeler, bilgi tabanları, şablonlar ve portfolyo öğeleri gibi içerik temsil eden kartlar için uygundur; “Ayarlar” gibi yalnızca bir giriş noktası olan kartların iç sayfası yoktur, bu yüzden uygun değildir. Kart bir kapak, 4 iç sayfa ve bir arka kapaktan oluşur ve sol kenar etrafında açılır; dururken bütün katmanlar tam olarak üst üste gelir.</li>\n        <li><strong>Zamanlama</strong>: kapak en çok açılır; içe doğru her katman daha az ve daha geç açılır: açı = 42° × 0.7ⁿ, gecikme = 28ms × n. Katmanlar sırasıyla yaklaşık 42°, 29°, 21°, 14° açılır; imleç ayrılınca ters sırayla kapanır, en içteki sayfa önce kapanır.</li>\n        <li><strong>Işık ve gölge</strong>: ışık yukarıdan gelir, gölge kartın altına düşer. Gölge iki katman dolu şekilden oluşur, açıldıkça aşağı doğru uzar ve yumuşar; iki sayfa ayrılana kadar öndeki sayfa arkadakine gölge düşürür. <code>box-shadow</code> kullanılmaz; o içi boş bir halkadır ve kapak açılınca dış hattı görünür.</li>\n        <li><strong>Üç stil</strong>: Default ürünün mevcut kart stilini kullanır, sıradan ürün kartlarına uygundur; Skeuomorphic galeri duvarındaki ciltli kitaplara benzer, kitap bezi dokusu ve sıcak gri gölgeleri vardır; Minimal bir teknik belge setine benzer, düz açık renk kapakta ince çizgili çizimler bulunur.</li>\n        </ol>\n        <p>Ayrıca açılma yalnızca kartın kendisini etkiler: kartın boyutu ve konumu değişmez, çevresindeki kartlar ve düzen de yerinden oynamaz.</p>\n        <h2>Parametreler</h2>\n        <dl class=\"params\">\n        <dt>Açı</dt><dd>Kapak 42°; içe doğru her katman için × 0.7</dd>\n        <dt>Gecikme</dt><dd>İçe doğru her katman için +28ms</dd>\n        <dt>Sayfalar</dt><dd>4; sol kenardan menteşeli</dd>\n        </dl>\n        <p>Ekteki Prompt önce stili, sayfa sayısını ve açılma yönünü sorar, ardından projedeki mevcut kartları dönüştürür.</p>"
      }
    },
    "007-type-switches": {
      "en": {
        "summary": "How to handle heading line breaks, shifting numbers, truncation, Chinese details and translation length in Chinese and English type.",
        "notes": "<p>The second line of a homepage headline holds a single word, the text next to a countdown shifts left and right with every tick, and a button label is squeezed onto two lines after switching to German. These problems come from line breaking and character widths, and most can be fixed with a few lines of CSS. The common ones fall into these groups:</p>\n        <ol>\n        <li><strong>Line breaks</strong>: Use <code>text-wrap: balance</code> on headings so the lines are about the same length and the last line never holds just one or two words; use <code>text-wrap: pretty</code> on body text so a paragraph does not end with a lone word; use <code>white-space: nowrap</code> on button labels so they always stay on one line.</li>\n        <li><strong>Numbers</strong>: For numbers that change, such as timers, prices and counts, use <code>font-variant-numeric: tabular-nums</code> so every digit has the same width. Otherwise, when 11 changes to 10, the “1” is narrower than the “0” and the text after it moves.</li>\n        <li><strong>Truncation</strong>: When long text needs an ellipsis, add <code>min-width: 0</code> to the element in a flex layout as well as <code>text-overflow: ellipsis</code>. A flex item’s minimum width defaults to its content width, so without this rule the text stretches the container and the ellipsis never appears.</li>\n        <li><strong>Chinese body text</strong>: Justify it with <code>text-align: justify</code> and set the line length to a whole number of characters, so the right edge is even; <code>text-autospace: normal</code> automatically adds space between Chinese and Latin letters or numbers; <code>text-spacing-trim: trim-start</code> removes the half-width blank before an opening bracket at the start of a line.</li>\n        <li><strong>Chinese headings and line-start and line-end rules</strong>: Mark the word boundaries in headings with BudouX and add <code>word-break: keep-all</code>, so lines break between words, never in the middle of one. Leave the line-start and line-end rules to the browser, and remove <code>line-break: anywhere</code>, which turns them off.</li>\n        <li><strong>Multiple languages</strong>: The same spot has to fit translations of different lengths. German words are usually longer than English ones, so a button that just fits on one line in English may not fit in German. When translating, have the agent choose translations whose length suits the page layout, so that no word is split across two lines and no excess blank space is left.</li>\n        </ol>\n        <p>The included prompt writes these rules into the global styles for every page to inherit, adjusting only line breaks, spacing, alignment and truncation, without changing copy, fonts or colors; afterward it lists the changed files and compares your pages before and after.</p>"
      },
      "text": {
        "summary": "Çince ve İngilizce tipografide başlıklarda satır kırma, kayan rakamlar, metin kısaltma, Çince ayrıntılar ve çevirilerin uzunluğu nasıl ele alınır.",
        "notes": "<p>Bir web sitesinin ilk ekranındaki başlığın ikinci satırında tek bir kelime kalır, geri sayım her değiştiğinde yanındaki metin sağa sola kayar, Almancaya geçince düğme metni iki satıra sıkışır. Bu sorunlar satır kırma ve karakter genişliğinden kaynaklanır, çoğu birkaç satır CSS ile çözülür. Sık karşılaşılanlar şunlardır:</p>\n        <ol>\n        <li><strong>Satır kırma</strong>: başlıklarda <code>text-wrap: balance</code> kullanılır; satır uzunlukları birbirine yakın olur, son satırda bir iki kelime kalmaz. Gövde metninde <code>text-wrap: pretty</code> paragraf sonunda tek kelime bırakmaz. Düğme metninde <code>white-space: nowrap</code> metni her zaman tek satırda tutar.</li>\n        <li><strong>Rakamlar</strong>: sayaç, fiyat, sayı gibi değişen rakamlarda <code>font-variant-numeric: tabular-nums</code> ile her rakam eşit genişlikte olur. Aksi halde 11’den 10’a geçerken “1” “0”dan dar olduğu için arkadaki metin de kayar.</li>\n        <li><strong>Kısaltma</strong>: uzun metinde üç nokta gerektiğinde <code>text-overflow: ellipsis</code> yanında esnek düzendeki öğeye <code>min-width: 0</code> da eklenir. Esnek alt öğelerin en küçük genişliği varsayılan olarak içerik genişliğine eşittir; bu satır olmazsa metin kabı genişletir ve üç nokta görünmez.</li>\n        <li><strong>Çince gövde metni</strong>: <code>text-align: justify</code> ile iki yana yaslanır ve satır genişliği tam sayıda karakter olarak ayarlanır; sağ kenar ancak o zaman düzgün olur. <code>text-autospace: normal</code> Çince ile İngilizce ve rakamlar arasına otomatik boşluk bırakır; <code>text-spacing-trim: trim-start</code> satır başındaki açılış parantezinin yarım genişlikteki boşluğunu kaldırır.</li>\n        <li><strong>Çince başlıklar ve satır başı-sonu kuralları</strong>: başlıklarda BudouX kelime sınırlarını işaretler; <code>word-break: keep-all</code> ile birlikte satırlar kelimelerden kırılır, kelimenin ortasından bölünmez. Satır başı ve sonu kuralları tarayıcıya bırakılır; bunları kapatan <code>line-break: anywhere</code> da kaldırılır.</li>\n        <li><strong>Çok dillilik</strong>: aynı yere farklı uzunlukta çeviriler sığmalıdır. Almanca kelimeler genellikle İngilizcelerden uzundur; İngilizcede tam bir satıra sığan düğme metni Almancada sığmayabilir. Çeviri sırasında Agent’tan sayfa düzenini göz önüne alarak uygun uzunlukta çeviri seçmesini isteyin; böylece bir kelime iki satıra bölünmez, fazla boşluk da kalmaz.</li>\n        </ol>\n        <p>Ekteki Prompt bu kuralları tüm sayfaların devraldığı genel stillere yazar; yalnızca metnin satır kırmasını, aralıklarını, hizalamasını ve kısaltmasını ayarlar, metinlere, yazı tiplerine ve renklere dokunmaz. Ardından değiştirdiği dosyaları listeler ve sayfanızda önceki ve sonraki hâli karşılaştırır.</p>"
      }
    },
    "008-wiki-layout": {
      "en": {
        "summary": "How to arrange the navigation bar, page list, end-of-article links, footer and mobile section switching in a wiki or help center.",
        "notes": "<p>When a product grows complex and its website needs many SEO articles, a reliable wiki can answer users’ questions and also bring in search traffic. The most common problems are that the page list cannot be found on a phone and that readers do not know where to go after an article. The layout needs to handle these five places:</p>\n        <ol>\n        <li><strong>Mobile section bar</strong>: Most phones are non-folding, with screens too narrow for a sidebar page list. Keep a section bar fixed at the bottom; tapping it opens a full-screen menu listing every section, one per row, easy to tap, with no need to scroll back to the top.</li>\n        <li><strong>Page list</strong>: When there are many sections and the list runs longer than one screen, give it its own height so it scrolls separately from the article, and cut off the overflow at the top and bottom. Add a gradient mask to the cut edges to show there is more above or below, plus a centered arrow button for scrolling with a click.</li>\n        <li><strong>End-of-article links</strong>: Below articles that answer questions, add links to the community and social media accounts. Whether the reader is a person or an AI, this brings conversions, like a free contextual ad for the conversion goal. Style the cards close to the article’s own components so they look like part of the article.</li>\n        <li><strong>Footer</strong>: Use an attractive background image to make the footer more than half a screen tall, drawing readers to scroll to the end and stay. Put genuinely useful information in the footer that helps readers solve their problems; otherwise it only puts them off.</li>\n        <li><strong>Navigation bar</strong>: Holds the logo (linking back to the main website), dropdown menus for key pages and the main CTA button, and sticks to the top on scroll. Safari and other browsers tint the address bar with the navigation bar’s color, so its background color should fit the brand.</li>\n        </ol>\n        <p>The included prompt finds the layout shared by the docs pages and adjusts only the position, scrolling and responsive behavior of the navigation bar, page list, outline and end-of-article area, leaving content, copy, colors and fonts unchanged; afterward it takes screenshots at the top, middle and end of a page and at phone width for you to check.</p>"
      },
      "text": {
        "summary": "Wiki ve yardım merkezlerinde başlık çubuğu, sayfa listesi, makale sonu yönlendirmesi, alt bilgi alanı ve telefonda bölüm değiştirme nasıl düzenlenir.",
        "notes": "<p>Ürün karmaşıklaştığında ve web sitesi için çok sayıda SEO makalesi yazmak gerektiğinde, güvenilir bir wiki hem kullanıcıların sorularını yanıtlar hem de arama trafiği getirir. En sık karşılaşılan sorunlar, telefonda sayfa listesinin bulunamaması ve makaleyi bitiren okurun nereye gideceğini bilmemesidir. Düzende şu beş yer ele alınmalıdır:</p>\n        <ol>\n        <li><strong>Mobil bölüm çubuğu</strong>: telefonlar çoğunlukla dikey tutulan cihazlardır, ekran dardır ve yanda bir sayfa listesine yer yoktur. Altta sürekli duran bir bölüm çubuğu bulunur; dokunulunca tam ekran bir menü bütün bölümleri her satırda bir tane olacak şekilde listeler. Dokunması kolaydır, başa kaydırmak gerekmez.</li>\n        <li><strong>Sayfa listesi</strong>: bölümler çok olup bir ekranı aştığında sayfa listesine ayrı bir yükseklik verilir, gövde metninden bağımsız kaydırılır ve taşan kısım üstte ve altta kesilir. Kesilen kenarlara, yukarıda ve aşağıda başka içerik olduğunu gösteren bir gradyan maske eklenir; ayrıca tıklayarak kaydırmak için ortalanmış bir ok düğmesi konur.</li>\n        <li><strong>Makale sonu yönlendirmesi</strong>: soruları yanıtlayan makalelerin altına topluluğa ve sosyal medya hesaplarına giden bağlantılar konur. Okur ister insan ister AI olsun, bu dönüşüm getirir; dönüşüm hedefi için ücretsiz bir bağlamsal reklam vermek gibidir. Kartın stili gövde metni bileşenlerine yakın tutulur, böylece makalenin bir parçası gibi görünür.</li>\n        <li><strong>Alt bilgi alanı</strong>: güzel bir arka plan görseliyle alt bilgi alanı ekranın yarısından yükseğe çıkarılır; okuru sonuna kadar kaydırmaya ve orada kalmaya çeker. Alt bilgi alanına okurun sorununu çözmesine yardım eden gerçekten yararlı bilgiler konmalıdır, yoksa yalnızca rahatsız eder.</li>\n        <li><strong>Başlık çubuğu</strong>: logo (web sitesine döner), önemli sayfalar için açılır menüler ve ana CTA düğmesi; kaydırırken üstte sabit kalır. Safari gibi tarayıcılar adres çubuğunu başlık çubuğunun rengine göre boyar, bu yüzden arka plan rengi markayla uyumlu olmalıdır.</li>\n        </ol>\n        <p>Ekteki Prompt belge sayfalarının ortak düzenini bulur ve yalnızca başlık çubuğunun, sayfa listesinin, ana hattın ve makale sonu alanının konumunu, kaydırmasını ve duyarlı davranışını ayarlar; içerik, metinler, renkler ve yazı tipleri değişmez. Ardından kontrol etmeniz için sayfanın üstünde, ortasında, sonunda ve telefon genişliğinde birer ekran görüntüsü alır.</p>"
      }
    },
    "009-overlays": {
      "en": {
        "summary": "When to use a tooltip, cursor tip, popconfirm, dialog, drawer or separate page.",
        "notes": "<p>Many dashboard products use dialogs everywhere: for the explanation behind a question mark, the confirmation before archiving, the edit form; each time, the user has to deal with the dialog before going on. A tooltip barely interrupts the user, while a dialog covers the whole page. The common overlays are these:</p>\n        <ol>\n        <li><strong>Tooltip</strong>: Adds text to whatever the pointer is on, often for truncated long text, such as a long file name in a table. It disappears when the pointer leaves, so it holds text only; for buttons or links, use a popover that opens on click instead.</li>\n        <li><strong>Cursor tip</strong>: Gives information continuously across a whole area, often in charts and fairly self-contained elements. It appears only when the pointer enters and moves with the pointer, such as showing the date and value of the data point under the pointer on a line chart.</li>\n        <li><strong>Popconfirm</strong>: For most actions that cannot be undone, such as deleting a comment. The confirmation appears next to the button, so the user does not have to look away; the path is short and it does not get in the way.</li>\n        <li><strong>Dialog</strong>: For confirmations with a big impact, bulk actions, or anything the user must stop and think about, such as permanently deleting a whole project; also for short forms that do not need other information on the page, such as renaming a file.</li>\n        <li><strong>Drawer</strong>: For longer forms, or forms that need the page content for reference while filling them in, such as editing a customer’s details next to the customer list. A drawer slides in from the side, so the main page stays visible, and it makes better use of the horizontal space on wide screens.</li>\n        <li><strong>Separate page</strong>: When the form is itself the main task, such as the full setup for a new project, make it a separate page with its own URL and a way back.</li>\n        </ol>\n        <p>Also, actions that can be undone, such as archiving, need no confirmation: do them right away and leave an “Undo” option. On phones, tooltips and cursor tips both show on tap instead.</p>\n        <p>The included prompt first finds every overlay in the product, decides which kind each one should use, and lists them in a table for you to decide; once you confirm, it changes only the parts you agreed to and keeps the visual style as it is.</p>"
      },
      "text": {
        "summary": "İpucu kutuları, imleç ipuçları, yerinde onaylar, iletişim kutuları, çekmeceler ve ayrı sayfalar hangi durumlara uygundur.",
        "notes": "<p>Pek çok yönetim paneli her yerde iletişim kutusu kullanır: soru işaretinin açıklaması, arşivlemeden önceki onay, düzenleme formu; her seferinde devam etmeden önce iletişim kutusuyla uğraşmak gerekir. İpucu kutusu kullanıcıyı neredeyse hiç bölmez, iletişim kutusu ise bütün sayfayı kapatır. Sık kullanılan katmanlar şunlardır:</p>\n        <ol>\n        <li><strong>İpucu kutusu (Tooltip)</strong>: imlecin gösterdiği içeriğe metin ekler; en çok kesilmiş uzun metinlerde, örneğin tablodaki uzun dosya adlarında görülür. İmleç ayrılınca kaybolduğu için yalnızca metin içerir; düğme ya da bağlantı gerekiyorsa tıklamayla açılan bir açılır panel (Popover) kullanılır.</li>\n        <li><strong>İmleç ipucu (Cursor tip)</strong>: bütün bir alan boyunca sürekli bilgi verir; en çok grafiklerde ve görece bağımsız öğelerde görülür. Yalnızca imleç alana girince belirir ve imleci izler; örneğin çizgi grafikte imlecin gösterdiği veri noktasının tarihini ve değerini gösterir.</li>\n        <li><strong>Yerinde onay (Popconfirm)</strong>: bir yorumu silmek gibi geri alınamayan işlemlerin çoğunda kullanılır. Onay penceresi düğmenin yanında belirir; kullanıcı gözünü ayırmak zorunda kalmaz, yol kısadır ve rahatsız etmez.</li>\n        <li><strong>İletişim kutusu (Dialog)</strong>: etkisi büyük, toplu ya da kullanıcının durup düşünmesi gereken onaylarda kullanılır, örneğin bütün bir projeyi kalıcı olarak silerken; ayrıca sayfadaki diğer bilgilere bakmayı gerektirmeyen kısa formlarda, örneğin bir dosyayı yeniden adlandırırken.</li>\n        <li><strong>Çekmece (Drawer)</strong>: uzun formlarda ya da doldururken sayfadaki içeriğe bakmak gerektiğinde kullanılır, örneğin müşteri listesinin yanında bir müşterinin bilgilerini düzenlerken. Çekmece yandan kayarak açılır, ana sayfa görünür kalır ve geniş ekranlardaki yatay alan daha iyi kullanılır.</li>\n        <li><strong>Ayrı sayfa</strong>: form asıl görevin kendisiyse, örneğin yeni proje oluştururken yapılan tüm ayarlar, kendi adresi ve geri dönüş yolu olan ayrı bir sayfa yapılır.</li>\n        </ol>\n        <p>Ayrıca arşivleme gibi geri alınabilen işlemler onay gerektirmez: işlem doğrudan yapılır ve bir “Geri al” seçeneği bırakılır. Telefonda ipucu kutuları ve imleç ipuçları dokunarak gösterilir.</p>\n        <p>Ekteki Prompt önce üründeki bütün katmanları bulur, her biri için hangisinin kullanılacağına karar verir ve kararı size bırakmak üzere bir tabloda listeler; onayınızdan sonra yalnızca kabul ettiğiniz kısımları değiştirir, görsel stil olduğu gibi kalır.</p>"
      }
    },
    "010-liquid-glass": {
      "en": {
        "summary": "The six layers of liquid glass, and how to adapt the tint and text color to the background, for cards and players over images or video.",
        "notes": "<p>Ordinary frosted glass has only a translucent background and blur, so text is hard to read over a busy background and the glass turns grayish on dark ones. Liquid glass adds refraction at the rim and a tint that changes with the background, so it looks thick and the text always stays clear. The material came out of building Lumno and is made of six stacked layers, from bottom to top:</p>\n        <ol>\n        <li><strong>Shadow</strong>: Gives the card a sense of volume.</li>\n        <li><strong>Blur and brightening</strong>: Blurs the background while raising its saturation and brightness, so the glass looks clearer. Light glass: saturation 180%, brightness 1.06; dark glass: saturation 160%, brightness 0.8.</li>\n        <li><strong>Rim refraction</strong>: An SVG displacement map shifts the background in a band around the rim inward, more the closer it is to the edge, while the middle stays flat; red light bends a little more than blue, creating a color split. Rim width 44px, color split ±15%.</li>\n        <li><strong>Tint</strong>: A layer of translucent color whose opacity adjusts automatically to how busy the background is: the busier the background, the stronger the tint and the easier the text is to read. Light glass uses white at 6%–22%, dark glass 16%–38%.</li>\n        <li><strong>Rim light</strong>: One line at the top left and one at the bottom right, plus one more inset further in, to make the whole piece look thicker.</li>\n        <li><strong>Ink</strong>: Text uses multiply on light glass and a brightening overlay on dark glass, so it picks up a little of the background’s color.</li>\n        </ol>\n        <p>Also, the material reads several sample points on the background and works out their average brightness; below 0.5 it switches to light automatically. Liquid glass suits covers, videos, wallpapers and other images with rich variation in brightness or color; on a solid background it looks almost the same as an ordinary translucent block. When checking the text, look at both the brightest and the darkest parts of the background.</p>\n        <h2>Parameters</h2>\n        <dl class=\"params\">\n        <dt>Light</dt><dd>Tint white 6%–22%; blur 2px; saturation 180%; brightness 1.06</dd>\n        <dt>Dark</dt><dd>Tint rgb(20 20 24) 16%–38%; blur 2px; saturation 160%; brightness 0.8</dd>\n        <dt>Refraction</dt><dd>Rim width 44px; shift at the edge 1.1 × rim width; color split ±15%</dd>\n        </dl>\n        <p>I have also released this material as an open-source playground, <a href=\"https://www.kubai.design/glasswork/\">Glasswork</a>: the tint, blur, rim refraction, rim light and text color can each be adjusted from a panel and checked over different wallpapers, photos and videos, and the result can be copied as CSS.</p>\n        <p>The included prompt first lists the cards, players and search boxes in the product that sit on images, video or busy backgrounds, and says which become glass and which stay as they are; it then writes the material into color tokens, with one set of tint strengths each for light and dark mode, and keeps the layout unchanged.</p>"
      },
      "text": {
        "summary": "Sıvı cam malzemesinin altı katmanı ve renk tonu ile metin renginin arka plana göre ayarlanması; görsel ya da video üzerindeki kartlar ve oynatıcılar için.",
        "notes": "<p>Sıradan buzlu cam yalnızca yarı saydam bir arka plan ve bulanıklıktan oluşur; arka plan karmaşık olduğunda metin zor okunur, koyu zeminlerde de grileşir. Sıvı cam kenar kırılması ve arka plana göre değişen bir renk tonu ekler; kalınlığı varmış gibi görünür ve metin her zaman net kalır. Bu malzeme Lumno geliştirilirken araştırıldı ve aşağıdan yukarıya şu altı katmandan oluşur:</p>\n        <ol>\n        <li><strong>Gölge</strong>: kartın hacmini gösterir.</li>\n        <li><strong>Bulanıklık ve parlatma</strong>: arka planı bulanıklaştırır, aynı zamanda doygunluğunu ve parlaklığını artırır; cam daha berrak görünür. Açık camda doygunluk %180, parlaklık 1.06; koyu camda doygunluk %160, parlaklık 0.8.</li>\n        <li><strong>Kenar kırılması</strong>: bir SVG yer değiştirme haritası kenar çevresindeki şeritte arka planı içe doğru kaydırır; kenara yaklaştıkça kayma artar, orta kısım düz kalır. Kırmızı ışık maviden biraz daha fazla kırılır ve renk ayrışması oluşur. Kenar genişliği 44px, renk ayrışması ±%15.</li>\n        <li><strong>Renk tonu</strong>: yarı saydam bir renk katmanıdır; opaklığı arka planın karmaşıklığına göre otomatik ayarlanır. Arka plan ne kadar karmaşıksa ton o kadar yoğun olur ve metin o kadar kolay okunur. Açık camda beyaz %6–%22, koyu camda %16–%38.</li>\n        <li><strong>Kenar ışığı</strong>: sol üstte ve sağ altta birer çizgi, biraz içeride de bir çizgi daha; bütün daha kalın görünür.</li>\n        <li><strong>Metin rengi</strong>: açık camda multiply, koyu camda plus-lighter karışım modu kullanılır; metin arka planın renginden biraz taşır.</li>\n        </ol>\n        <p>Ayrıca malzeme arka plandaki birkaç örnek noktayı okuyup ortalama parlaklığı hesaplar; değer 0.5’in altındaysa otomatik olarak açık renge geçer. Sıvı cam kapaklar, videolar ve duvar kâğıtları gibi açıklığı ya da rengi çok değişen görüntülerin üzerine uygundur; düz renkli bir arka planda sıradan yarı saydam bir renk bloğundan neredeyse farkı yoktur. Metni kontrol ederken arka planın hem en parlak hem en koyu yerlerine bakın.</p>\n        <h2>Parametreler</h2>\n        <dl class=\"params\">\n        <dt>Açık</dt><dd>Renk tonu beyaz %6–%22; bulanıklık 2px; doygunluk %180; parlaklık 1.06</dd>\n        <dt>Koyu</dt><dd>Renk tonu rgb(20 20 24) %16–%38; bulanıklık 2px; doygunluk %160; parlaklık 0.8</dd>\n        <dt>Kırılma</dt><dd>Kenar genişliği 44px; kenardaki kayma 1.1 × kenar genişliği; renk ayrımı ±%15</dd>\n        </dl>\n        <p>Yazar bu malzemeyi açık kaynaklı bir araç olarak yayımladı: <a href=\"https://www.kubai.design/glasswork/\">Glasswork</a>. Renk tonu, bulanıklık, kenar kırılması, kenar ışığı ve yazı rengi bir panelden tek tek ayarlanıp farklı duvar kâğıtları, fotoğraflar ve videolar üzerinde denenebilir; sonuç doğrudan CSS olarak kopyalanabilir.</p>\n        <p>Ekteki Prompt önce üründe görsel, video ya da karmaşık arka planlar üzerinde duran kartları, oynatıcıları ve arama kutularını listeler, hangilerinin cama dönüşeceğini, hangilerinin aynı kalacağını açıklar; ardından malzemeyi renk token’larına yazar, açık ve koyu mod için ayrı ton yoğunlukları belirler, düzen değişmez.</p>"
      }
    },
    "011-easing-curves": {
      "en": {
        "summary": "Seven common animation easing curves, from Linear to Spring, and the kind of motion each one suits.",
        "notes": "<p>The rhythm of an animation is described by its easing curve: the steeper the curve, the sharper the change in speed and the faster it looks. If a menu popping up, a dialog closing and an indicator sliding all use the default <code>ease</code>, users cannot tell whether an element is appearing, disappearing or changing place. The common curves are these:</p>\n        <ol>\n        <li><strong>Linear</strong>: For things like progress bars and loading that only need to look like they are “running”. Constant speed, abrupt at the start and end, <code>linear</code>.</li>\n        <li><strong>Ease-out and Strong ease-out</strong>: For overlays and modal elements entering, such as toasts, menus, dialogs and drawers, use Ease-out, fast then slow, <code>cubic-bezier(0, 0, .58, 1)</code>. For small elements that settle into place right after a click, such as icons, text and a selected pill, use Strong ease-out, which starts faster and settles longer, <code>cubic-bezier(.22, 1, .36, 1)</code>, for the most immediate response.</li>\n        <li><strong>Ease-in</strong>: For elements leaving, such as a dialog closing or a toast disappearing. Slow then fast, for a clean exit, <code>cubic-bezier(.42, 0, 1, 1)</code>. Do not use it for entrances: the slow start makes the interface look sluggish.</li>\n        <li><strong>Ease-in-out</strong>: For elements changing place within the interface, such as the indicator sliding under tabs, a carousel turning pages or a table of contents scrolling smoothly. Slow at both ends and fastest in the middle, <code>cubic-bezier(.42, 0, .58, 1)</code>.</li>\n        <li><strong>Overshoot</strong>: For small, playful confirmations, such as a check mark, a like or a badge popping up. Goes about 10% past the end and comes back, <code>cubic-bezier(.34, 1.56, .64, 1)</code>. Do not use it on large panels, or the whole block of interface will wobble.</li>\n        <li><strong>Spring</strong>: For settling back after release, such as a drawer springing back, pull to refresh, or an item landing after drag to reorder. It wobbles gently once or twice at the end before coming to rest, more like a real object than Overshoot; the element already has velocity when the user lets go, and a spring can carry that velocity on.</li>\n        </ol>\n        <p>Also, define these curves as motion tokens and use them by role, so the rhythm stays consistent across the whole product.</p>\n        <p>The included prompt first lists every transition and animation in the project, marking the places that still use the default ease or use ease-in for an entrance, and the curve each one should change to; it then adds motion tokens and adjusts the curves and durations one by one.</p>"
      },
      "text": {
        "summary": "Linear’dan Spring’e, sık kullanılan yedi animasyon hız eğrisi ve her birinin hangi tür harekete uygun olduğu.",
        "notes": "<p>Animasyonun ritmi hız eğrisiyle tanımlanır: eğri ne kadar dikse hız o kadar sert değişir ve hareket o kadar hızlı görünür. Menünün açılması, iletişim kutusunun kapanması ve gösterge çubuğunun kayması hep varsayılan <code>ease</code> ile yapılırsa kullanıcı öğenin belirdiğini mi, kaybolduğunu mu, yer mi değiştirdiğini mi ayırt edemez. Sık kullanılan eğriler şunlardır:</p>\n        <ol>\n        <li><strong>Linear</strong>: ilerleme çubukları ve yükleme gibi yalnızca “çalışıyor” görünen şeyler için. Sabit hızla hareket eder, başlangıcı ve bitişi serttir, <code>linear</code>.</li>\n        <li><strong>Ease-out ve Strong ease-out</strong>: Toast, menü, iletişim kutusu ve çekmece gibi katmanların ve kipli öğelerin girişinde önce hızlı sonra yavaş olan Ease-out kullanılır, <code>cubic-bezier(0, 0, .58, 1)</code>. Tıklamadan hemen sonra yerine oturan simge, metin, seçili hap gibi küçük öğelerde daha hızlı başlayıp daha uzun biten Strong ease-out kullanılır, <code>cubic-bezier(.22, 1, .36, 1)</code>; tepkisi en doğrudan olandır.</li>\n        <li><strong>Ease-in</strong>: iletişim kutusunun kapanması, Toast’un kaybolması gibi çıkışlar için. Önce yavaş sonra hızlıdır, öğe kararlı biçimde ayrılır, <code>cubic-bezier(.42, 0, 1, 1)</code>. Girişlerde kullanılmaz; yavaş başladığı için arayüz geç tepki veriyormuş gibi görünür.</li>\n        <li><strong>Ease-in-out</strong>: sekmelerin altında kayan gösterge çubuğu, karuselde sayfa geçişi, içindekilerde yumuşak kaydırma gibi arayüz içinde yer değiştiren öğeler için. İki ucu yavaş, ortası en hızlıdır, <code>cubic-bezier(.42, 0, .58, 1)</code>.</li>\n        <li><strong>Overshoot</strong>: işaretleme, beğenme, rozetin belirmesi gibi küçük ve oyuncu onaylar için. Hedefi yaklaşık %10 aşıp geri döner, <code>cubic-bezier(.34, 1.56, .64, 1)</code>. Büyük panellerde kullanılmaz, yoksa arayüzün bütün bir bölümü sallanır.</li>\n        <li><strong>Spring</strong>: çekmecenin geri yaylanması, aşağı çekerek yenileme, sürükleyerek sıralamadan sonra yerine oturma gibi bırakıldıktan sonra yerine dönen hareketler için. Hedefe varınca bir iki kez hafifçe sallanıp durur; Overshoot’tan daha çok gerçek bir nesneye benzer. Kullanıcı bıraktığında öğenin zaten bir hızı vardır; yay bu hızla harekete devam edebilir.</li>\n        </ol>\n        <p>Ayrıca bu eğriler hareket token’ları olarak tanımlanıp role göre kullanılırsa bütün üründe ritim tutarlı kalır.</p>\n        <p>Ekteki Prompt önce projedeki bütün geçişleri ve animasyonları listeler; hâlâ varsayılan ease kullanan ya da girişte ease-in kullanan yerleri ve her birinin hangi eğriye geçeceğini işaretler. Ardından hareket token’larını ekler, eğrileri ve süreleri tek tek ayarlar.</p>"
      }
    },
    "012-message-bubbles": {
      "en": {
        "summary": "Six message bubble materials with matching thinking, sending and deleting motion, for products that want to stand out from typical AI chats.",
        "notes": "<p>Typical AI assistant interfaces look almost the same: blue bubbles on the right, gray bubbles on the left, three bouncing dots while waiting. Bubbles appear more than anything else in a conversation, so changing their material and pairing it with matching motion gives the interface a style of its own. This is an exploratory version with six materials:</p>\n        <ol>\n        <li><strong>Cirrus</strong>: Suits light, clean products. A thin frosted glass with no border, with blue sky and white clouds behind it.</li>\n        <li><strong>Pixel</strong>: Has a retro game feel. The bubble is drawn on a pixel grid, its edges change one cell at a time, and it leaves a slight pixel trail as it moves.</li>\n        <li><strong>Aqua</strong>: Nostalgic and lively. The jelly-like look of the old Mac, with a layer of highlight on the surface.</li>\n        <li><strong>Gradient</strong>: Suits products that want to emphasize the brand. As in Telegram, the whole conversation shares one gradient, so bubbles at different heights have different colors.</li>\n        <li><strong>Skeuomorphic</strong>: Warm and tactile. Uses the same recipe as <a href=\"/001-skeuomorphic-buttons/\">001 Skeuomorphic buttons</a>.</li>\n        <li><strong>Solid</strong>: The basic control group. Easiest to read in long conversations with long reading time, and the lightest on performance.</li>\n        </ol>\n        <p>Also, the motion has to change along with the material, or the styles clash, as with pixel bubbles and a soft fade in and out. The whole conversation moves as one, and each material has its own spring values: on send, a new bubble rises from about 40px below, entering in a way that depends on the material; while the AI writes a long reply, a small dot matrix shows first and expands into a bubble once the reply starts; after a message in the middle is deleted, the messages above move down one after another to fill the gap.</p>\n        <p>The included prompt first asks whether to restyle your existing chat interface or build a standalone demo, and which materials to use; once you confirm, it adjusts the bubble materials and motion together, and asks you item by item before changing the input box, message menu and typing indicator.</p>"
      },
      "text": {
        "summary": "Altı mesaj balonu malzemesi ve bunlara uygun düşünme, gönderme ve silme hareketleri; yaygın AI sohbet arayüzlerinden farklılaşmak isteyen ürünler için.",
        "notes": "<p>Yaygın AI asistanı arayüzleri neredeyse aynıdır: sağda mavi balonlar, solda gri balonlar, beklerken zıplayan üç nokta. Balonlar sohbette en sık görünen öğedir; malzemelerini değiştirip uygun hareketlerle eşleştirmek arayüze kendine ait bir stil kazandırır. Şu an deneysel bir sürümdür ve altı malzeme vardır:</p>\n        <ol>\n        <li><strong>Cirrus</strong>: hafif ve sade ürünler için uygundur. Kenarlığı olmayan ince buzlu cam; arkasında beyaz bulutlu mavi bir gökyüzü.</li>\n        <li><strong>Piksel</strong>: retro oyun havası taşır. Balonlar bir piksel ızgarası üzerine çizilir, kenarları hücre hücre değişir ve hareket ederken arkalarında hafif bir piksel izi kalır.</li>\n        <li><strong>Aqua</strong>: nostaljik ve canlıdır. Eski Mac’lerin jöle görünümü; yüzeyini bir parlaklık katmanı kaplar.</li>\n        <li><strong>Gradyan</strong>: markayı öne çıkarmak için uygundur. Telegram’ın yaklaşımına benzer: bütün sohbet tek bir gradyanı paylaşır, balon hangi yükseklikte duruyorsa rengi de ona göre değişir.</li>\n        <li><strong>Skeuomorfik</strong>: sıcak ve dokunsaldır. <a href=\"/tr/001-skeuomorphic-buttons/\">001 Skeuomorfik düğmeler</a> ile aynı tarifi kullanır.</li>\n        <li><strong>Düz renk</strong>: temel karşılaştırma grubudur. Sohbet uzun olduğunda ve uzun süre okunduğunda en iyi okunan ve performans açısından en hafif olandır.</li>\n        </ol>\n        <p>Ayrıca hareket de malzemeyle birlikte değiştirilmelidir, yoksa stiller çatışır; örneğin piksel balonlar yumuşak bir belirip kaybolma hareketiyle uyuşmaz. Bütün sohbet tek bir bütün olarak hareket eder ve her malzeme kendi yay değerlerini kullanır: gönderirken yeni balon yaklaşık 40px aşağıdan yükselir ve giriş biçimi malzemeye göre değişir; AI uzun bir yanıt üretirken önce küçük bir nokta matrisi gösterilir, yanıt başlayınca bu matris açılarak balona dönüşür; ortadaki bir mesaj silindiğinde üstteki mesajlar sırayla aşağı inerek boşluğu doldurur.</p>\n        <p>Ekteki Prompt önce mevcut sohbet arayüzünü mü dönüştüreceğinizi yoksa ayrı bir demo mu yapacağınızı ve hangi malzemeleri kullanacağınızı sorar; onayınızdan sonra balon malzemesini ve hareketleri birlikte ayarlar. Giriş kutusu, mesaj menüsü ve yazıyor göstergesi ise her biri için tek tek size sorulduktan sonra değiştirilir.</p>"
      }
    },
    "013-shockwave-glow": {
      "en": {
        "summary": "A shockwave halo that spreads from where it is triggered, with lens distortion and a color split, to play when an AI assistant is called up.",
        "notes": "<p>This effect combines the marquee light around the screen edge in iOS 27.3 with the halo burst the Dia browser plays when it opens its home page: the halo spreads from the trigger point, and the page it passes over bends and splits in color, which gives it a physical feel. The effect is made of these six layers:</p>\n        <ol>\n        <li><strong>Page snapshot</strong>: Turns the current page into an image as the basis for the layers that follow; Chrome’s new HTML-in-Canvas can help with this.</li>\n        <li><strong>Lens bend</strong>: The halo as a whole acts as a lens, stretching on the outside and compressing on the inside, so space looks pushed apart.</li>\n        <li><strong>Channel split</strong>: The red and blue channels shift 8% more and 8% less than the green channel, creating a slight color split where the page is displaced, while text stays sharp.</li>\n        <li><strong>Color rings</strong>: Four color rings blend smoothly and fade out as the halo spreads, setting its color and brightness. In light mode they tint the page; in dark mode they add light to it with a screen blend.</li>\n        <li><strong>Edge refraction</strong>: The halo spreads only within the content area and does not cover the browser’s or app’s toolbar. When it reaches the edge, the content stretches slightly toward the edge as if seen through the bevel of a piece of glass, while the window frame stays as it is.</li>\n        <li><strong>Glints on lines</strong>: As the halo passes, dividers and borders brighten briefly, more faintly in dark mode, so the page’s structure also takes part in the effect.</li>\n        </ol>\n        <p>Also, the halo is eye-catching and suits only infrequent actions such as calling up an AI; on a button that is clicked often it soon gets annoying. With “Reduce motion” on, drop the bend and the color split, and the halo only fades in and out in place.</p>\n        <h2>Parameters</h2>\n        <dl class=\"params\">\n        <dt>Duration</dt><dd>Spreads over 1000ms; fast, then slow</dd>\n        <dt>Color split</dt><dd>Red at 1.08 times; blue at 0.92 times the offset</dd>\n        <dt>Aurora</dt><dd>Blue, violet, pink, peach</dd>\n        <dt>Halo</dt><dd>Orange, yellow</dd>\n        <dt>Frost</dt><dd>Mint</dd>\n        <dt>Spark</dt><dd>Violet, gold</dd>\n        </dl>\n        <p>The included prompt first confirms the trigger, where the halo spreads from, whether to enable the bend and edge refraction, and the palette; once you confirm, it proposes an implementation based on the project’s tech stack.</p>"
      },
      "text": {
        "summary": "Tetiklendiği noktadan dışa doğru yayılan, mercek bükülmesi ve renk ayrışması içeren bir şok dalgası halesi; AI asistanını çağırırken oynatmak için.",
        "notes": "<p>Bu efekt, iOS 27.3’teki ekran kenarında dolaşan ışık efektini ve Dia tarayıcısının ana sayfayı açarken oluşturduğu hale darbesini birleştirir: hale tetiklendiği noktadan yayılır, geçtiği sayfa bükülür ve renkleri ayrışır; bu yüzden fiziksel bir his verir. Efekt şu altı katmandan oluşur:</p>\n        <ol>\n        <li><strong>Sayfa görüntüsü</strong>: geçerli sayfa bir görsele dönüştürülür ve sonraki katmanların hesaplamalarına temel olur; Chrome’un yeni HTML-in-Canvas özelliğinden yararlanılabilir.</li>\n        <li><strong>Mercek bükülmesi</strong>: halenin tamamı bir mercek gibi davranır; dış tarafı gerer, iç tarafı sıkıştırır ve alanın itildiği hissini verir.</li>\n        <li><strong>Kanal ayrımı</strong>: kırmızı kanal yeşil kanaldan %8 daha fazla, mavi kanal %8 daha az kayar; kaymanın olduğu yerde hafif bir renk ayrışması oluşur, metin net kalır.</li>\n        <li><strong>Renk halkaları</strong>: dört renk halkası birbirine yumuşakça geçer ve hale yayıldıkça yavaş yavaş solar; halenin rengini ve parlaklığını belirler. Açık modda sayfayı renklendirir, koyu modda screen karışımıyla sayfaya ışık ekler.</li>\n        <li><strong>Kenar kırılması</strong>: hale yalnızca içerik alanında yayılır, tarayıcının ya da uygulamanın araç çubuğunu kapatmaz. Kenara ulaştığında içerik, bir camın pahından bakılıyormuş gibi kenara doğru hafifçe gerilir; pencere çerçevesi değişmez.</li>\n        <li><strong>Çizgilerde parıltı</strong>: hale geçerken ayırıcılar ve kenarlıklar bir an parlar, koyu modda daha zayıf; böylece sayfanın yapısı da efekte katılır.</li>\n        </ol>\n        <p>Ayrıca hale çok dikkat çekicidir ve yalnızca AI’ı çağırmak gibi seyrek yapılan işlemlere uygundur; sık tıklanan bir düğmede kullanılırsa kısa sürede bıktırır. “Hareketi azalt” açıkken bükülme ve renk ayrışması kaldırılır, hale yalnızca yerinde belirip kaybolur.</p>\n        <h2>Parametreler</h2>\n        <dl class=\"params\">\n        <dt>Süre</dt><dd>1000ms boyunca yayılır; önce hızlı, sonra yavaş</dd>\n        <dt>Renk ayrışması</dt><dd>Kırmızı 1.08 kat; mavi 0.92 kat kayma</dd>\n        <dt>Aurora</dt><dd>Mavi, mor, pembe, şeftali</dd>\n        <dt>Halo</dt><dd>Turuncu, sarı</dd>\n        <dt>Frost</dt><dd>Nane yeşili</dd>\n        <dt>Spark</dt><dd>Mor, altın</dd>\n        </dl>\n        <p>Ekteki Prompt önce tetikleme koşulunu, yayılma noktasını, bükülmenin ve kenar kırılmasının kullanılıp kullanılmayacağını ve renk paletini sorar; onayınızdan sonra projenin teknoloji yığınına göre bir uygulama planı önerir.</p>"
      }
    },
    "014-card-delete": {
      "en": {
        "summary": "Which kind of deletion the Burn, Plume, Blocks and Peel card effects each suit, and how the remaining cards close the gap.",
        "notes": "<p>In lists such as to-dos, a deleted item often vanishes instantly and the item below jumps up at once to fill the gap, before the user can see which one was deleted. The four effects below make the deletion visible, and handle how neighboring cards react and close the gap:</p>\n        <ol>\n        <li><strong>Burn</strong>: Suits thorough, formal deletions. Fire spreads from the delete button, and the paper chars until only an edge of ash remains, with sparks and paper flakes drifting upward; neighboring cards light up on the side facing the fire and warp slightly in the heat.</li>\n        <li><strong>Plume</strong>: Suits gentle or positive actions, such as completing a to-do or archiving a note. A soft flame rises from the bottom of the card and carries it away from the bottom up; neighboring cards light up too and warp slightly.</li>\n        <li><strong>Blocks</strong>: Suits casual contexts. The card breaks into blocks of different sizes that scatter outward, fall to the bottom of the list, bounce once and disappear; neighboring cards take the impact, get pushed away and spring back.</li>\n        <li><strong>Peel</strong>: Suits elements that look like physical objects, such as stickers and sticky notes. The card lifts from the corner nearest the delete button, showing a white die-cut border on its back, and flies off once peeled; neighboring cards are pulled toward the sticker and spring back once it comes off.</li>\n        <li><strong>Closing the gap</strong>: The remaining cards start closing the gap on a spring before the effect ends, changing only their position, not their height, so there is no jump and no pause between the deletion and the gap closing.</li>\n        </ol>\n        <p>Also, before the deletion takes effect, read the card’s position and capture its image; the effect’s first frame must match the real card exactly, rounded corners included, or the card will jump first. When the user undoes, the effect stops at once and the card comes back the way the product already restores items.</p>\n        <h2>Parameters</h2>\n        <dl class=\"params\">\n        <dt>Duration</dt><dd>Burn 2s; Plume 1.4s; Blocks 1.5s; Peel 1.2s</dd>\n        <dt>Closing the gap</dt><dd>Spring 520ms; transforms only</dd>\n        <dt>At once</dt><dd>Up to 3 at a time; beyond that, a fade</dd>\n        </dl>\n        <p>The included prompt first reads the project and confirms the delete entry points, the effects, how neighboring elements react and the colors; once you confirm, it makes the changes to fit the existing tech stack and interface.</p>"
      },
      "text": {
        "summary": "Yanma, alev, bloklar ve çıkartma soyma: dört kart silme efektinin hangi tür silmeye uygun olduğu ve kalan kartların boşluğu nasıl kapattığı.",
        "notes": "<p>Yapılacaklar gibi listelerde silinen öğe çoğu zaman bir anda kaybolur, alttaki öğeler hemen yukarı sıçrayıp boşluğu doldurur ve kullanıcı hangi öğeyi sildiğini göremeden geçer. Aşağıdaki dört efekt silme sürecini görünür kılar, komşu kartların tepkisini ve boşluğun kapanmasını da ele alır:</p>\n        <ol>\n        <li><strong>Burn (yanma)</strong>: kesin ve resmi silmeler için uygundur. Alev silme düğmesinden başlayıp yayılır, kâğıt yandıktan sonra geriye yalnızca bir kül kenarı kalır, kıvılcımlar ve kâğıt kırıntıları yukarı savrulur; komşu kartların aleve bakan yüzü aydınlanır ve sıcak hava dalgasıyla hafifçe bükülür.</li>\n        <li><strong>Plume (alev)</strong>: yapılacak bir işi tamamlamak ya da bir notu arşivlemek gibi yumuşak ya da olumlu işlemler için uygundur. Kartın altından yumuşak bir alev yükselir ve kartı aşağıdan yukarıya doğru götürür; komşu kartlar yine aydınlanır ve hafifçe bükülür.</li>\n        <li><strong>Blocks (bloklar)</strong>: rahat, hafif durumlar için uygundur. Kart farklı boyutlarda bloklara ayrılarak dışa saçılır, listenin altına düşüp bir kez sekerek kaybolur; komşu kartlar darbeyle itilir ve geri yaylanır.</li>\n        <li><strong>Peel (soyulma)</strong>: çıkartmalar ve yapışkan notlar gibi kendisi zaten gerçek bir nesneye benzeyen öğeler için uygundur. Kart, silme düğmesine yakın köşesinden kaldırılır, arka yüzünde beyaz bir kesim kenarı vardır ve soyulduktan sonra uçup gider; komşu kartlar çıkartmaya doğru çekilir ve soyulunca geri yaylanır.</li>\n        <li><strong>Boşluğu kapatma</strong>: kalan kartlar efekt bitmeden yay hareketiyle boşluğu doldurmaya başlar; yalnızca konum değişir, yükseklik değişmez. Silme ile boşluğun kapanması arasında ne sıçrama ne de boşluk olur.</li>\n        </ol>\n        <p>Ayrıca silme gerçekleşmeden önce kartın konumu okunur ve görüntüsü alınır; efektin ilk karesi köşe yarıçapı dahil gerçek kartla birebir aynı olmalıdır, yoksa kart önce bir kez sıçrar. Kullanıcı geri aldığında efekt hemen durur ve kart ürünün mevcut yöntemiyle geri gelir.</p>\n        <h2>Parametreler</h2>\n        <dl class=\"params\">\n        <dt>Süre</dt><dd>Burn 2s; Plume 1.4s; Blocks 1.5s; Peel 1.2s</dd>\n        <dt>Boşluğu kapatma</dt><dd>Yay 520ms; yalnızca transform</dd>\n        <dt>Aynı anda</dt><dd>Aynı anda en fazla 3; fazlası için solma</dd>\n        </dl>\n        <p>Ekteki Prompt önce projeyi okur; silme noktalarını, efektleri, komşu öğelerin tepkisini ve renkleri sizinle netleştirir; onayınızdan sonra mevcut teknoloji yığınına ve arayüze göre dönüştürür.</p>"
      }
    },
    "015-ui-continuity": {
      "en": {
        "summary": "Using seven common iOS cases, how to carry the element you tapped straight into the next state when the interface changes.",
        "notes": "<p>When the user taps the mini player, if the bar simply disappears and the player pops up as a whole page, the user has to look for the cover and buttons all over again on the new page. Continuity means the element you tapped carries straight into the next state, so people always know where they came from and where they are now. The common cases in iOS are these:</p>\n        <ol>\n        <li><strong>Navigation</strong>: When going from a list to the next level, the title of the tapped row carries on as the page title, and the old page title shrinks into the back button; on scroll, the title moves into the top bar.</li>\n        <li><strong>Card and Chart</strong>: When a card opens into its details, such as an article card or a data card. The card expands into the article, the image extends into the header image, and the small bars on the card carry on as the chart’s bars; pulling down retraces the same path back.</li>\n        <li><strong>Player</strong>: When the mini player expands into the full player, the small cover grows straight into its place on the player page, and the title and buttons each move to their new positions instead of disappearing first and fading back in.</li>\n        <li><strong>Search</strong>: When the search field is tapped, it moves to the top, matching items move up as the user types, and the rest fade out.</li>\n        <li><strong>Menu</strong>: When a menu opens from a button, it expands from the button’s position; a new item drops into the first place, and the others move back one after another.</li>\n        <li><strong>Tab Bar</strong>: When switching tabs, the selected pill first stretches, then settles into its new position.</li>\n        </ol>\n        <p>Also, content that exists only in the end state, such as the player’s progress bar and lyrics, fades in after half of the move, not at the same time as the shared elements, so it does not pull the eye away. When collapsing or going back, elements return along the same path.</p>\n        <h2>Parameters</h2>\n        <dl class=\"params\">\n        <dt>Curve</dt><dd>cubic-bezier(.32, .72, 0, 1); fast start, long settle</dd>\n        <dt>Duration</dt><dd>Phones: 450–700ms to open a full screen; 350–500ms for menus and bottom sheets; desktop about two thirds of that</dd>\n        <dt>Fade-in</dt><dd>Content that exists only in the end state fades in after half of the move</dd>\n        </dl>\n        <p>The included prompt first reads the project, finds the places where continuity fits, and proposes a plan ranked by how often each is used and how much it costs to change; once you confirm, it carries out the changes.</p>"
      },
      "text": {
        "summary": "iOS’taki yedi yaygın senaryo üzerinden, arayüz geçişlerinde dokunulan öğenin doğrudan bir sonraki duruma nasıl dönüşeceği.",
        "notes": "<p>Mini oynatıcı çubuğuna dokunulduğunda çubuk birden kaybolup oynatıcı sayfası bütünüyle açılırsa, kullanıcı yeni sayfada kapağı ve düğmeleri yeniden aramak zorunda kalır. Süreklilik, dokunulan öğenin doğrudan bir sonraki duruma geçmesidir; kullanıcı nereden geldiğini ve şu an nerede olduğunu her zaman bilir. iOS’ta sık görülen senaryolar şunlardır:</p>\n        <ol>\n        <li><strong>Navigation</strong>: listeden bir alt sayfaya geçerken dokunulan satırın başlığı sayfa başlığına dönüşür, önceki sayfanın başlığı geri düğmesine küçülür; kaydırırken başlık üst çubuğa yerleşir.</li>\n        <li><strong>Card ve Chart</strong>: makale kartı, veri kartı gibi bir kart ayrıntı sayfası olarak açıldığında kullanılır. Kart gövde metnine açılır, görsel başlık görseline genişler, karttaki küçük çubuklar grafiğin çubuklarına dönüşür; aşağı çekince aynı yoldan geri kapanır.</li>\n        <li><strong>Player</strong>: mini oynatıcı çubuğu oynatıcı sayfasına açılırken küçük kapak doğrudan oynatıcı sayfasındaki yerine büyür, başlık ve düğmeler de her biri kendi yeni yerine taşınır; önce kaybolup sonra belirmez.</li>\n        <li><strong>Search</strong>: arama kutusuna dokunulunca kutu üste taşınır, eşleşen öğeler yazdıkça yukarı kayar, diğerleri solarak kaybolur.</li>\n        <li><strong>Menu</strong>: menü bir düğmeden açıldığında düğmenin bulunduğu yerden açılır; yeni eklenen öğe en başa yerleşir, diğerleri sırayla geriye kayar.</li>\n        <li><strong>Tab Bar</strong>: sekme değiştirirken seçili hap önce uzar, sonra yeni yerine oturur.</li>\n        </ol>\n        <p>Ayrıca yalnızca bitiş durumunda görünen içerik, örneğin oynatıcı sayfasındaki ilerleme çubuğu ve şarkı sözleri, yer değiştirme yarıyı geçtikten sonra belirir; dikkati dağıtmamak için paylaşılan öğelerle aynı anda değişmez. Kapanırken ve geri dönerken öğeler aynı yoldan eski hâline döner.</p>\n        <h2>Parametreler</h2>\n        <dl class=\"params\">\n        <dt>Eğri</dt><dd>cubic-bezier(.32, .72, 0, 1); hızlı başlangıç, uzun oturma</dd>\n        <dt>Süre</dt><dd>Telefonlar: tam ekran açmak için 450–700ms; menüler ve alt sayfalar için 350–500ms; masaüstünde bunun yaklaşık üçte ikisi</dd>\n        <dt>Belirme</dt><dd>Yalnızca son durumda bulunan içerik, taşınmanın yarısından sonra belirir</dd>\n        </dl>\n        <p>Ekteki Prompt önce projeyi okur, sürekliliğe uygun yerleri bulur ve bunları kullanım sıklığına ve dönüştürme maliyetine göre sıralayarak bir plan sunar; onayınızdan sonra dönüştürmeyi uygular.</p>"
      }
    },
    "016-toast-or-notification": {
      "en": {
        "summary": "Which messages suit a Toast and which suit a Notification, and when to use neither.",
        "notes": "<p>Toasts and Notifications are both small cards floating over the page, and they are often mixed up: important information disappears after a few seconds, while an ordinary confirmation like “Saved” stays on screen. The common kinds of message are these five:</p>\n        <ol>\n        <li><strong>Status Toast</strong>: Confirms the result of an action that the user only needs to know about, such as copying a link or moving a task. Just an icon and a short line of text, with no buttons; it disappears after 3 seconds.</li>\n        <li><strong>Action Toast</strong>: For actions that can be undone. Run the action right away without asking first; the Toast keeps an Undo button for 5 seconds, with a ring showing the time left, and after an undo it changes in place to “Task restored”.</li>\n        <li><strong>Progress Toast</strong>: For actions that take a while, such as uploading a file. It shows progress first, changes in place into the result when done, and offers a button to view it.</li>\n        <li><strong>Notification</strong>: For information from other people or the system that needs to be seen but not handled right away, such as a mention, a task coming due or a weekly report being generated. It appears in the top right and stays until the user handles or dismisses it; up to three stack up, and they expand into a list on hover.</li>\n        <li><strong>Dialogs and inline messages</strong>: Anything the user must deal with suits neither a Toast nor a Notification. Confirm actions that cannot be undone with a dialog before running them; failures that need handling stay where they occur until resolved, and form errors appear next to their fields.</li>\n        </ol>\n        <h2>Parameters</h2>\n        <dl class=\"params\">\n        <dt>Toast enter</dt><dd>500ms; cubic-bezier(.25, .1, .25, 1); down 10px; clears from an 8px blur</dd>\n        <dt>Sheen</dt><dd>Only when something is done: a status toast entering, progress turning into its result, Undo completed</dd>\n        <dt>Notification enter</dt><dd>Drops from 56px above; 560ms; cubic-bezier(.32, .72, 0, 1)</dd>\n        <dt>Notification stack</dt><dd>Each layer peeks out 12px; at most three layers</dd>\n        </dl>\n        <p>The included prompt first reads the product and decides for each message whether it should use a Toast, a Notification or neither, listing them in a table for you to decide; once you confirm, it can also restyle the Toast and Notification to match the demo.</p>"
      },
      "text": {
        "summary": "Toast ve Notification hangi tür bildirimlere uygundur ve ne zaman ikisi de kullanılmamalıdır.",
        "notes": "<p>Toast ve Notification sayfanın üzerinde duran küçük kartlardır ve sık sık birbirinin yerine kullanılır: önemli bilgiler birkaç saniye sonra kaybolur, “Kaydedildi” gibi sıradan onaylar ise arayüzde kalmaya devam eder. Sık kullanılan bildirimler şu beş türdür:</p>\n        <ol>\n        <li><strong>Status Toast</strong>: kullanıcının yalnızca bilmesinin yeterli olduğu işlem sonuçlarını onaylar, örneğin bağlantı kopyalama, görev taşıma. Yalnızca bir simge ve kısa bir cümleden oluşur, düğme içermez, 3 saniye sonra kendiliğinden kaybolur.</li>\n        <li><strong>Action Toast</strong>: geri alınabilen işlemler için. İşlem önceden onay istenmeden doğrudan yapılır; Toast 5 saniye boyunca bir Undo düğmesi gösterir ve kalan süre bir halkayla gösterilir; geri alınınca aynı yerde “Task restored” olur.</li>\n        <li><strong>Progress Toast</strong>: dosya yükleme gibi uzun süren işlemler için. Önce ilerlemeyi gösterir, bitince aynı yerde sonuca dönüşür ve bir görüntüleme düğmesi sunar.</li>\n        <li><strong>Notification</strong>: başkalarından ya da sistemden gelen, görülmesi gereken ama hemen ilgilenilmesi gerekmeyen bilgiler için; örneğin birinin sizden bahsetmesi, bir görevin süresinin dolması, haftalık raporun hazırlanması. Sağ üstte gösterilir ve kullanıcı ilgilenene ya da kapatana kadar kalır; en fazla üç katman üst üste yığılır, üzerine gelince liste olarak açılır.</li>\n        <li><strong>İletişim kutusu ve yerinde uyarı</strong>: kullanıcının mutlaka ilgilenmesi gereken durumlar için Toast da Notification da uygun değildir. Geri alınamayan işlemler yapılmadan önce bir iletişim kutusuyla onaylanır; ilgilenilmesi gereken hatalar çözülene kadar yerinde kalır, form hataları ilgili alanın yanında gösterilir.</li>\n        </ol>\n        <h2>Parametreler</h2>\n        <dl class=\"params\">\n        <dt>Toast girişi</dt><dd>500ms; cubic-bezier(.25, .1, .25, 1); 10px aşağı; 8px bulanıklıktan netleşir</dd>\n        <dt>Parlama</dt><dd>Yalnızca bir şey tamamlandığında: durum toast’ının girişi, ilerlemenin sonuca dönüşmesi, Geri al’ın tamamlanması</dd>\n        <dt>Bildirim girişi</dt><dd>56px yukarıdan düşer; 560ms; cubic-bezier(.32, .72, 0, 1)</dd>\n        <dt>Bildirim yığını</dt><dd>Her katman 12px görünür; en fazla üç katman</dd>\n        </dl>\n        <p>Ekteki Prompt önce ürünü okur, her bildirim için Toast mı, Notification mı yoksa hiçbiri mi kullanılacağına tek tek karar verir ve kararı size bırakmak üzere bir tabloda listeler; onayınızdan sonra Toast ve Notification’ı demodaki gibi dönüştürebilir de.</p>"
      }
    },
    "017-loading-states": {
      "en": {
        "summary": "Spinner, Skeleton, Progress and optimistic updates: which kind of wait each of these four loading states suits.",
        "notes": "<p>Waiting is unavoidable. How users are told they are waiting affects how they feel and whether their work flows smoothly; sometimes the result should be shown first and then corrected if needed. The common ones are these four:</p>\n        <ol>\n        <li><strong>Spinner</strong>: For a single action that finishes within a few seconds, such as refreshing or syncing. After the press, the button’s own icon spins in place while its label and width stay the same; even if the result comes back at once, it turns at least one full circle and stops on a whole turn, and a Toast reports the result when it ends.</li>\n        <li><strong>Skeleton</strong>: When the page structure is known, such as a feed, a list or a chart. The title and filters appear first, and after 300ms a skeleton shows at the real row height; as content arrives it replaces the skeleton row by row in place, so the page does not jump. Do not put a lone spinning icon in the middle of a blank page.</li>\n        <li><strong>Progress</strong>: For long tasks that can be counted, such as uploading, importing or running diagnostics. A notification card shows the count, a progress bar and the time left, and the page stays usable; when done, the card changes in place into the result and stays until the user handles it.</li>\n        <li><strong>Optimistic</strong>: For actions that will very likely succeed and are easy to roll back, such as checking off a task, liking or renaming. Show the result first and save in the background; if the save fails, the change goes back to where it was, with the reason explained and a retry offered. Strictly speaking this is a strategy rather than a pattern, and it is not used for payments, permanent deletion or content sent to other people.</li>\n        </ol>\n        <p>Also, waits under 300ms get no separate loading state; otherwise it vanishes as soon as it appears and looks like a flicker. Once shown, it stays for at least 500ms. Use only one loading state per wait.</p>\n        <h2>Parameters</h2>\n        <dl class=\"params\">\n        <dt>Threshold</dt><dd>Nothing under 300ms; once shown, at least 500ms</dd>\n        <dt>Button icon</dt><dd>Turns from the press; at least one turn (640ms); ends on a whole turn</dd>\n        <dt>Skeleton</dt><dd>After 300ms; the light band crosses every 1.2s; rows replace it 40ms apart, each fading in over 200ms</dd>\n        <dt>Progress</dt><dd>Shows after about 0.5s; the time left after 1s of data</dd>\n        <dt>Optimistic</dt><dd>Shown at once; when the save fails, the row shakes 6px twice over 360ms</dd>\n        </dl>\n        <p>The included prompt first finds every place in the product where users wait, decides which approach each one should use, and lists them in a table for you to decide; once you confirm, it makes the changes to match the demo.</p>"
      },
      "text": {
        "summary": "Spinner, Skeleton, Progress ve iyimser güncelleme: bu dört yükleme durumunun her biri hangi tür beklemeye uygundur.",
        "notes": "<p>Bekleme kaçınılmazdır. Kullanıcıya beklediğini nasıl bildirdiğiniz, onun duygularını ve işlemin akıcılığını etkiler; bazen önce sonucu gösterip ardından gerçek duruma göre düzeltmek gerekir. Sık kullanılan dört tür şunlardır:</p>\n        <ol>\n        <li><strong>Spinner</strong>: yenileme, eşitleme gibi birkaç saniyede biten tekil işlemler için. Basıldıktan sonra düğmenin kendi simgesi yerinde döner, metin ve genişlik değişmez; sonuç hemen gelse bile en az bir tam tur döner ve tam turda durur; bitince sonuç bir Toast ile bildirilir.</li>\n        <li><strong>Skeleton</strong>: akışlar, listeler, grafikler gibi sayfa yapısı bilindiğinde. Önce başlık ve filtreler görünür, 300ms sonra gerçek satır yüksekliğinde iskelet gösterilir; içerik gelince satır satır yerinde değiştirilir, sayfa zıplamaz. Boş bir sayfanın ortasına yalnızca dönen bir simge koymayın.</li>\n        <li><strong>Progress</strong>: yükleme, içe aktarma, tanılama gibi sayılabilen uzun işler için. Bir bildirim kartı sayıyı, ilerleme çubuğunu ve kalan süreyi gösterir, sayfa her zamanki gibi kullanılabilir; bitince kart aynı yerde sonuca dönüşür ve kullanıcı ilgilenene kadar kalır.</li>\n        <li><strong>Optimistic</strong>: tamamlandı olarak işaretleme, beğenme, yeniden adlandırma gibi büyük olasılıkla başarılı olan ve kolayca geri alınabilen işlemler için. Önce sonuç gösterilir, arka planda kaydedilir; kaydetme başarısız olursa değişiklik eski hâline döner, nedeni açıklanır ve yeniden deneme seçeneği sunulur. Tam olarak söylemek gerekirse bu bir kalıp değil bir stratejidir; ödemelerde, kalıcı silmelerde ve başkalarına gönderilen içerikte kullanılmaz.</li>\n        </ol>\n        <p>Ayrıca 300ms’den kısa beklemelerde ayrı bir yükleme durumu gösterilmez; yoksa belirir belirmez kaybolur ve bir an yanıp sönmüş gibi görünür. Gösterildikten sonra en az 500ms kalır. Bir bekleme için yalnızca bir yükleme durumu kullanılır.</p>\n        <h2>Parametreler</h2>\n        <dl class=\"params\">\n        <dt>Eşik</dt><dd>300ms altında hiçbir şey; gösterildiğinde en az 500ms</dd>\n        <dt>Düğme simgesi</dt><dd>Basıldığı andan itibaren döner; en az bir tur (640ms); tam bir turda biter</dd>\n        <dt>İskelet</dt><dd>300ms sonra; ışık bandı her 1.2s’de bir geçer; satırlar 40ms arayla yerini alır, her biri 200ms’de belirir</dd>\n        <dt>İlerleme</dt><dd>Yaklaşık 0.5s sonra görünür; kalan süre 1s’lik veriden sonra</dd>\n        <dt>İyimser</dt><dd>Hemen gösterilir; kayıt başarısız olursa satır 360ms içinde iki kez 6px sallanır</dd>\n        </dl>\n        <p>Ekteki Prompt önce üründe beklemenin olduğu bütün yerleri bulur, her biri için hangi yöntemin kullanılacağına karar verir ve kararı size bırakmak üzere bir tabloda listeler; onayınızdan sonra demodaki gibi dönüştürür.</p>"
      }
    },
    "018-holo-card": {
      "en": {
        "summary": "A 3D holographic card that tilts and turns over, for cards that stand for status or ownership, such as member cards, tickets and badges.",
        "notes": "<p>When a real holographic card turns, color flows across its face. On screen, the pointer position stands in for the angle in your hand: a light spot that follows the pointer sets where the foil, glare and rim light up, and at rest the spot sits at the top left. The key points in building it:</p>\n        <ol>\n        <li><strong>Tilt</strong>: The card tilts toward the pointer, up to 12°, on a spring, and springs back slightly when the pointer leaves; when no one is using it, it keeps a slow 2–3° sway, as if held in a hand.</li>\n        <li><strong>Foil layer</strong>: Sits on top of the card’s base color and is brighter closer to the light spot. Text is printed above the foil layer, so it stays readable at any angle.</li>\n        <li><strong>Finishes</strong>: Six presets in all. Everyday products suit a quiet finish such as Pearl, or a tilt reduced to 6°; save Rainbow and Sparkle for moments worth celebrating, such as upgrading a membership or unlocking a rare achievement.</li>\n        <li><strong>Glare and rim</strong>: The glare spreads softly outward from the light spot; the rim is faint overall and only the part near the light spot is lit, so it comes and goes.</li>\n        <li><strong>Depth</strong>: The artwork on the card is spread across different depths, with offset = depth × sin(angle); as the card turns, the layers shift against each other, giving a real sense of three-dimensional space.</li>\n        <li><strong>Turning over</strong>: On click, the card turns 180° to its back on a spring, lifting slightly as it turns to show a 10px edge; the front content changes at the moment the card is edge-on, so the change cannot be seen.</li>\n        </ol>\n        <p>Also, put only one holographic card on a screen; when everything glows, nothing stands out. With “Reduce motion” on, the card does not tilt or sway, and turning over is not animated.</p>\n        <h2>Parameters</h2>\n        <dl class=\"params\">\n        <dt>Tilt</dt><dd>Up to 12° (6° for a quiet finish); spring stiffness 140, damping 15</dd>\n        <dt>Sway at rest</dt><dd>2 to 3°, slow; the light moves with it</dd>\n        <dt>Turning over</dt><dd>Spring stiffness 70, damping 11; lifts 40px; a 10px edge of 10 layers</dd>\n        <dt>Depth</dt><dd>Picture 90px behind, dial 50px, needle 12px in front</dd>\n        <dt>Rim</dt><dd>1.5px; lit near the light, fading out by 42%</dd>\n        <dt>Finishes</dt><dd>Prism, Rainbow, Pearl, Sparkle, Chrome, Etched</dd>\n        </dl>\n        <p>The included prompt first asks item by item which card to restyle, and about the finish, feel, interaction, depth and background, giving recommended values and a few presets for each; once you confirm, it builds the card with the project’s existing tech stack.</p>"
      },
      "text": {
        "summary": "Eğilip ters dönebilen 3D holografik kartlar; üyelik kartları, biletler ve rozetler gibi kimlik ya da koleksiyon niteliği taşıyan kartlar için.",
        "notes": "<p>Gerçek bir holografik kart çevrildiğinde renkler yüzeyinde akar. Ekranda eldeki açının yerini imlecin konumu alır: imleci izleyen tek bir ışık noktası holografik katmanın, parlamanın ve parlak kenarın yerini birlikte belirler; dururken ışık noktası sol üstte kalır. Uygularken şu noktalar önemlidir:</p>\n        <ol>\n        <li><strong>Eğim</strong>: kart imlecin yönüne doğru en fazla 12° eğilir; yay animasyonu kullanılır, imleç ayrılınca hafifçe geri yaylanır. Kimse dokunmadığında elde tutuluyormuş gibi 2–3° yavaşça salınır.</li>\n        <li><strong>Holografik katman</strong>: kartın zemin renginin üzerinde durur ve ışık noktasına yaklaştıkça parlar. Metin holografik katmanın üzerine basılır; kart hangi açıya dönerse dönsün net okunur.</li>\n        <li><strong>Malzeme</strong>: altı hazır ayar vardır. Günlük kullanılan ürünlere Pearl gibi sade bir malzeme ya da 6°’ye düşürülmüş bir eğim uygundur; Rainbow ve Sparkle, üyelik yükseltme ya da nadir bir başarının kilidini açma gibi kutlamaya değer anlara bırakılır.</li>\n        <li><strong>Parlama ve parlak kenar</strong>: parlama ışık noktasını merkez alarak yumuşakça dışa yayılır; parlak kenar genel olarak çok soluktur, yalnızca ışık noktasına yakın bölümü aydınlanır, bu yüzden belli belirsiz görünür.</li>\n        <li><strong>Paralaks katmanları</strong>: kart yüzündeki desenler farklı derinliklere dağılır, kayma = derinlik × sin(açı); kart dönerken katmanlar birbirine göre kayar ve gerçek bir üç boyutlu alan hissi oluşur.</li>\n        <li><strong>Ters dönme</strong>: tıklanınca kart yay animasyonuyla 180° dönüp arka yüzüne geçer; dönerken biraz kalkar ve 10px kalınlığı görünür. Ön yüzün içeriği kart yan durduğu anda değiştirilir, bu yüzden görülmez.</li>\n        </ol>\n        <p>Ayrıca bir ekranda yalnızca bir holografik kart bulunur; her şey parlıyorsa hiçbir şey öne çıkmaz. “Hareketi azalt” açıkken kart eğilmez, salınmaz ve ters dönme animasyonsuz gerçekleşir.</p>\n        <h2>Parametreler</h2>\n        <dl class=\"params\">\n        <dt>Eğim</dt><dd>En fazla 12° (sakin bir yüzey için 6°); yay sertliği 140, sönümleme 15</dd>\n        <dt>Dururken salınım</dt><dd>2 ila 3°, yavaş; ışık da onunla birlikte hareket eder</dd>\n        <dt>Ters dönme</dt><dd>Yay sertliği 70, sönümleme 11; 40px yükselir; 10 katmandan oluşan 10px’lik bir kenar</dd>\n        <dt>Derinlik</dt><dd>Resim 90px geride, kadran 50px, ibre 12px önde</dd>\n        <dt>Kenar</dt><dd>1.5px; ışığa yakın yerde aydınlanır, %42’de tamamen kaybolur</dd>\n        <dt>Yüzeyler</dt><dd>Prism, Rainbow, Pearl, Sparkle, Chrome, Etched</dd>\n        </dl>\n        <p>Ekteki Prompt önce hangi kartın dönüştürüleceğini ve malzeme, his, etkileşim, katmanlar ve arka plan konularını tek tek sorar, her biri için önerilen değerleri ve birkaç hazır ayarı sunar; onayınızdan sonra projenin mevcut teknoloji yığınıyla uygular.</p>"
      }
    },
    "019-scroll-cards": {
      "en": {
        "summary": "Five scroll-driven card interactions (stacked cards, card deck, pinned gallery, cover flow, image expand) for product sites and portfolios.",
        "notes": "<p>When scrolling a page, users expect elements to move vertically; these effects turn scrolling into sideways, rotating or irregular motion, which is why they feel fresh. They are all driven directly by the scroll position: stop halfway and the effect stops halfway; scroll back and the effect plays in reverse.</p>\n        <ol>\n        <li><strong>Stacked cards</strong>: Suits three to five parallel items that each take up a screen. Cards stack one on another as the page scrolls, each sticking 16px lower than the one before; each layer of covered cards shrinks by 0.05 and darkens by 12%, and the thin strips showing at the top are the content already seen.</li>\n        <li><strong>Card deck</strong>: Suits a small amount of content shown one item at a time. Every 420px of scrolling, the top card is flung to one side along an arc, alternating left and right and turning up to 16°; the cards below each move up one place.</li>\n        <li><strong>Pinned gallery</strong>: Suits a row of work wider than the screen. The page holds still for a while, and each 1px scrolled down moves the row 1px to the left, with no easing; a counter and a progress bar show how far the reader has got.</li>\n        <li><strong>Cover flow</strong>: Suits content of the same shape that is viewed one item at a time. Every 320px of scrolling, the next cover moves to the middle; the covers on either side shrink, turn up to 30° and darken step by step, drawing the eye to the middle.</li>\n        <li><strong>Image expand</strong>: Suits a main image that leads into the next chapter. The small image grows to fill the screen as the page scrolls, while scaling back from 1.2× to 1×; the title hides behind the mountain (cut out as a separate layer) and rises at a quarter of the speed, creating depth.</li>\n        </ol>\n        <p>Also, use each effect at most once on a page, with ordinary sections in between; do not change the scroll speed or force snapping, and change only transform, opacity and clip-path. With “Reduce motion” on, or when the viewport is shorter than 560px, every effect falls back to an ordinary section.</p>\n        <h2>Parameters</h2>\n        <dl class=\"params\">\n        <dt>Stacked cards</dt><dd>Sticky top 40px + i × 16px; scale 1 − k × 0.05, shade k × 0.12; k rises by 1 every 752px</dd>\n        <dt>Card deck</dt><dd>420px per card; x = side × t² × 1000px, rotate side × t × 16°; 18px and 0.05 per place below</dd>\n        <dt>Pinned gallery</dt><dd>Height 100vh + row overflow (1520px); 1px down = 1px sideways</dd>\n        <dt>Cover flow</dt><dd>320px per cover; 260px apart, 30° turn, scale down to 0.6, shade 0.15 per place</dd>\n        <dt>Image expand</dt><dd>Grows over 900px, holds 300px; frame 584 × 352 to full screen; picture 1.2× to 1×</dd>\n        </dl>\n        <p>The included prompt is for restyling an existing page: it first asks which sections to change, and about length, phones and short screens, reduced motion and the implementation, giving recommended values and a few presets for each; once you confirm, it builds them with the project’s existing tech stack.</p>"
      },
      "text": {
        "summary": "Kaydırmayla çalışan beş kart etkileşimi: üst üste binen kartlar, uçan kart destesi, yatay galeri, kapak karuseli ve görsel genişletme; ürün siteleri ve portfolyolar için.",
        "notes": "<p>Sayfa kaydırılırken kullanıcı öğelerin dikey hareket etmesini bekler; bu efektler kaydırmayı yatay, dönen ya da düzensiz bir harekete çevirdiği için yeni görünür. Hepsi doğrudan kaydırma konumuyla yönetilir: yarıda durursanız efekt de yarıda durur; geri kaydırırsanız efekt tersine oynar.</p>\n        <ol>\n        <li><strong>Üst üste binen kartlar</strong>: her biri bir ekran kaplayan üç ila beş eşdeğer proje için uygundur. Kartlar kaydırdıkça katman katman üst üste biner, her kart üstte bir öncekinden 16px daha aşağıda sabitlenir; altta kalan kartlar her katmanda 0.05 küçülür ve %12 koyulaşır, üstte görünen ince şeritler görülmüş içeriği gösterir.</li>\n        <li><strong>Uçan kart destesi</strong>: tek tek gösterilen az sayıda içerik için uygundur. Her 420px kaydırmada en üstteki kart bir yay çizerek bir yana fırlar, sağa ve sola sırayla, en fazla 16° döner; alttaki kartlar sırayla bir kat yukarı çıkar.</li>\n        <li><strong>Yatay galeri</strong>: ekrandan geniş bir sıra çalışma için uygundur. Sayfa geçici olarak sabitlenir, aşağı doğru her 1px kaydırmada çalışma sırası 1px sola kayar, yumuşatma eklenmez; bir sayaç ve ilerleme çubuğu nereye kadar görüldüğünü gösterir.</li>\n        <li><strong>Kapak karuseli</strong>: aynı biçimde olan ve bir seferde tek tek bakılan içerik için uygundur. Her 320px kaydırmada sonraki kapak ortaya gelir; iki yandaki kapaklar küçülür, en fazla 30° döner ve katman katman koyulaşır, böylece dikkat ortada toplanır.</li>\n        <li><strong>Görsel genişletme</strong>: bir sonraki bölüme geçiş yapan tek bir ana görsel için uygundur. Küçük görsel kaydırdıkça ekranı doldurur, aynı zamanda 1.2 kattan 1 kata küçülür; başlık dağın arkasına saklanır (dağ ayrı bir katman olarak kesilir) ve dörtte bir hızla yükselerek derinlik hissi oluşturur.</li>\n        </ol>\n        <p>Ayrıca her efekt bir sayfada en fazla bir kez kullanılır ve aralarına normal bölümler girer; kaydırma hızı değiştirilmez, zorunlu yapışma kullanılmaz, yalnızca transform, opacity ve clip-path değiştirilir. “Hareketi azalt” açıkken ya da görüntü alanının yüksekliği 560px’ten azsa hepsi normal bölümlere döner.</p>\n        <h2>Parametreler</h2>\n        <dl class=\"params\">\n        <dt>Üst üste binen kartlar</dt><dd>Sticky top 40px + i × 16px; ölçek 1 − k × 0.05, gölge k × 0.12; k her 752px’de 1 artar</dd>\n        <dt>Kart destesi</dt><dd>Kart başına 420px; x = side × t² × 1000px, rotate side × t × 16°; alttaki her sıra için 18px ve 0.05</dd>\n        <dt>Sabitlenmiş galeri</dt><dd>Yükseklik 100vh + sıranın taşan kısmı (1520px); 1px aşağı = 1px yana</dd>\n        <dt>Cover flow</dt><dd>Kapak başına 320px; 260px aralık, 30° dönüş, 0.6’ya kadar küçülme, her sıra için 0.15 gölge</dd>\n        <dt>Görsel genişletme</dt><dd>900px boyunca büyür, 300px sabit kalır; çerçeve 584 × 352’den tam ekrana; resim 1.2×’ten 1×’e</dd>\n        </dl>\n        <p>Ekteki Prompt mevcut sayfaları dönüştürmek içindir: önce hangi bölümlerin dönüştürüleceğini ve uzunluk, telefon ve alçak ekranlar, hareketi azaltma ve uygulama yöntemi konularını sorar, her biri için önerilen değerleri ve birkaç hazır ayarı sunar; onayınızdan sonra projenin mevcut teknoloji yığınıyla uygular.</p>"
      }
    },
    "020-choice-controls": {
      "en": {
        "summary": "When to use a switch, checkbox, radio button, segmented control, select or dropdown menu.",
        "notes": "<p>These controls look alike and are often mixed up. For example, a settings page has a switch to flip, yet there is also a Save button below it, and the setting does not take effect once the user leaves the page. The differences are explained below in four pairs:</p>\n        <ol>\n        <li><strong>Switches and checkboxes</strong>: The difference is when the change takes effect. A switch takes effect as soon as it is flipped and suits auto-saving contexts such as settings pages, with no Save button next to it; checkboxes are submitted with a form and need a submit button. Represent turning one thing on and off with a single switch, not two radio buttons for “On” and “Off”.</li>\n        <li><strong>Selects and dropdown menus</strong>: A select holds values, and the chosen one shows in the box, such as a language; a dropdown menu holds actions, which run as soon as they are clicked while the button label stays the same, and is often used to tuck away buttons in a toolbar or at the top of a page. The most used action can be the main button, with an icon button beside it opening the rest, such as “Schedule send” and “Save as draft” next to “Send”.</li>\n        <li><strong>Segmented controls and selects</strong>: Both are for picking one. Use a segmented control for 2–5 short options, which can be taken in at a glance; when each option needs a line of explanation, use radio buttons stacked vertically instead. Use a select when there are more options, the text is long, or the options change (names, dates, items users add), so the interface does not jump; for up to hundreds (time zones, countries), add a search box at the top of the list and a clear message for when nothing matches.</li>\n        <li><strong>Radio buttons and checkboxes</strong>: Radio buttons suit single-choice questions where all options should be read, as in a survey; once a choice is made it cannot be cleared, so provide an option such as “Not sure yet”; when several can be picked, use checkboxes. The same goes inside a select: for a single choice, put a check mark after the chosen item instead of drawing a radio circle; for multiple choice, put a checkbox before each item.</li>\n        </ol>\n        <p>Also, the result of every control must be visible right away: turning on desktop notifications immediately shows a notification; after “Export data” runs from a dropdown menu, a Toast reports the result.</p>\n        <h2>Parameters</h2>\n        <dl class=\"params\">\n        <dt>Number of options</dt><dd>2–5 short options: segmented control; 2–5 that each need explaining: radio buttons; 6 or more: select; hundreds: select with search</dd>\n        <dt>Switch</dt><dd>40×24px, 8px corners; 18px thumb; 220ms, cubic-bezier(.32, .72, 0, 1)</dd>\n        <dt>Segmented control</dt><dd>36px tall, 4px padding; 28px thumb, 8px corners; 280ms</dd>\n        <dt>Option list</dt><dd>36px options; 14px corners; opens in 180ms, closes in 120ms</dd>\n        <dt>Radio buttons and checkboxes</dt><dd>18px; radio buttons round, checkboxes with 5px corners</dd>\n        </dl>\n        <p>The included prompt first finds every selection control in the product, decides whether each one is used correctly and what it should change to, and lists them in a table for you to decide; once you confirm, it changes them one by one according to these rules.</p>"
      },
      "text": {
        "summary": "Anahtar, onay kutusu, radyo düğmesi, segmentli kontrol, açılır liste ve açılır menü hangi durumlara uygundur.",
        "notes": "<p>Bu kontroller birbirine benzer görünür ve sık sık birbirinin yerine kullanılır. Örneğin ayarlar sayfasında bir anahtar açılır ama altında bir de kaydet düğmesi vardır; kullanıcı sayfadan ayrıldığında ayar etkili olmamıştır. Farklar aşağıda dört grupta açıklanıyor:</p>\n        <ol>\n        <li><strong>Anahtar ve onay kutusu</strong>: fark, değişikliğin ne zaman etkili olduğundadır. Anahtar çevrildiği anda etkili olur, ayarlar sayfası gibi otomatik kaydedilen yerlere uygundur ve yanına kaydet düğmesi konmaz; onay kutusu formla birlikte gönderilir ve bir gönder düğmesi gerektirir. Bir şeyin açık ya da kapalı olması tek bir anahtarla gösterilir, “Açık / Kapalı” şeklinde iki radyo düğmesiyle gösterilmez.</li>\n        <li><strong>Açılır liste ve açılır menü</strong>: açılır listede değerler bulunur, seçilen değer kutuda görünür, örneğin dil; açılır menüde işlemler bulunur, tıklanınca hemen yapılır ve düğme metni değişmez; genellikle araç çubuğundaki ya da sayfanın üstündeki düğmeleri toplamak için kullanılır. En sık kullanılan işlem ana düğme yapılabilir, diğer işlemler yanındaki bir simge düğmesiyle açılır; örneğin “Gönder”in yanında “Zamanlanmış gönderim” ve “Taslak olarak kaydet”.</li>\n        <li><strong>Segmentli kontrol ve açılır liste</strong>: ikisi de tek seçim içindir. 2–5 kısa seçenek için segmentli kontrol kullanılır, hepsi bir bakışta görülür; her seçeneğin bir satır açıklaması gerekiyorsa alt alta dizilmiş radyo düğmeleri kullanılır. Seçenekler daha çok, metinler daha uzun ya da değişken olduğunda (kişi adları, tarihler, kullanıcının eklediği öğeler) arayüz zıplamasın diye açılır liste kullanılır; yüzlerce seçenek olduğunda (saat dilimleri, ülkeler) listenin üstüne bir arama kutusu eklenir ve sonuç bulunamadığında gösterilecek mesaj hazırlanır.</li>\n        <li><strong>Radyo düğmesi ve onay kutusu</strong>: radyo düğmesi, anket gibi bütün seçeneklerin okunması gereken tek seçimli sorular için uygundur; seçildikten sonra kaldırılamaz, bu yüzden “Henüz emin değilim” gibi bir seçenek sunulmalıdır. Birden çok seçim yapılabiliyorsa onay kutusu kullanılır. Açılır listede de aynısı geçerlidir: tek seçimde seçili öğenin arkasına bir onay işareti konur, radyo dairesi çizilmez; çoklu seçimde her öğenin önüne bir onay kutusu konur.</li>\n        </ol>\n        <p>Ayrıca her kontrolün sonucu hemen görünür olmalıdır: masaüstü bildirimleri açıldığında hemen bir bildirim gösterilir; açılır menüden “Verileri dışa aktar” çalıştırıldığında sonuç bir Toast ile bildirilir.</p>\n        <h2>Parametreler</h2>\n        <dl class=\"params\">\n        <dt>Seçenek sayısı</dt><dd>2–5 kısa seçenek: segmentli kontrol; her biri açıklama gerektiren 2–5 seçenek: radyo düğmesi; 6 ve üzeri: açılır liste; yüzlerce: aramalı açılır liste</dd>\n        <dt>Anahtar</dt><dd>40×24px, köşe yarıçapı 8px; kaydırıcı 18px; geçiş 220ms, cubic-bezier(.32, .72, 0, 1)</dd>\n        <dt>Segmentli kontrol</dt><dd>Yükseklik 36px, iç boşluk 4px; kaydırıcı yüksekliği 28px, köşe yarıçapı 8px; geçiş 280ms</dd>\n        <dt>Seçenek listesi</dt><dd>Seçenek yüksekliği 36px; köşe yarıçapı 14px; açılma 180ms, kapanma 120ms</dd>\n        <dt>Radyo düğmesi ve onay kutusu</dt><dd>18px; radyo düğmesi yuvarlak, onay kutusunun köşe yarıçapı 5px</dd>\n        </dl>\n        <p>Ekteki Prompt önce üründeki bütün seçim kontrollerini bulur, her birinin doğru kullanılıp kullanılmadığına ve hangisine geçmesi gerektiğine tek tek karar verir ve kararı size bırakmak üzere bir tabloda listeler; onayınızdan sonra kurallara göre tek tek dönüştürür.</p>"
      }
    },
    "021-ring-cards": {
      "en": {
        "summary": "A set of cards arranged in a ring: seen from inside, their edges pass through glass with a color fringe; seen from outside, they have depth of field; on the cards, a flowing fluid gradient.",
        "notes": "<p>A typical card carousel is just a row of cards sliding left and right. Lay the same row out on a ring and the cards gain distance: from inside, the side cards wrap around the viewer; from outside, the middle is sharp and the farther cards blur. The key points:</p>\n        <ol>\n        <li><strong>Two views</strong>: The cards sit along one arc. With a positive curvature the viewer is inside the ring, with a negative one outside. Change the curvature continuously when switching, and the whole row bends smoothly from one ring into the other.</li>\n        <li><strong>Inside</strong>: Suits content people browse at leisure, like portfolios and galleries. The viewer stands a little behind the ring’s center, perspective 860px; the side cards are closer and larger, and five cards fit on screen.</li>\n        <li><strong>Glass rim</strong>: A 160px band of glass at each side of the frame. The closer to the outer edge, the further toward the middle it samples, so the cards’ top and bottom edges flare out; red shifts more than blue, giving a soft color fringe.</li>\n        <li><strong>Outside and depth of field</strong>: Suits places where people look at one item at a time, like picking a cover. The ring is seen at eye level, perspective 1500px; the middle stays sharp, and the sides and the far side blur and fade. The blur is worked out per pixel, so nothing shimmers as the ring turns.</li>\n        <li><strong>Fluid gradient and turning over</strong>: Each card’s front is a fluid gradient of four colors that flows slowly around a circle and loops seamlessly. Switching to outside turns the cards over one after another, from the middle out, to show the picture on the back.</li>\n        </ol>\n        <p>Also, the cards have no shadow or reflection, which looks dirty on a white page; distance comes only from size, blur and fade. With “Reduce motion” on, the gradients stop flowing and the view switches at once.</p>\n        <h2>Parameters</h2>\n        <dl class=\"params\">\n        <dt>Cards</dt><dd>180 × 300px, 18px apart, 22 in all; ring radius about 693px</dd>\n        <dt>Inside</dt><dd>perspective 860px; glass rim 160px, offset 0.4 × its width, falloff exponent 2.4; dispersion 25%</dd>\n        <dt>Outside</dt><dd>perspective 1500px; blur starts 110px from the center, up to 14px; far side faded 50%</dd>\n        <dt>Fluid</dt><dd>4 colors, 3 layers of noise warped twice; flows 0.2 noise cells per second</dd>\n        <dt>Corners</dt><dd>continuous corners, superellipse(2), 32px</dd>\n        <dt>Switching</dt><dd>view 1100ms; turning over 1800ms, from the middle out</dd>\n        </dl>\n        <p>The included prompt first asks where it goes, what the cards hold, which view it opens in and who sees the settings panel; once confirmed, it builds the effect with the values in the video, plus a slider panel for tuning them live.</p>"
      },
      "text": {
        "summary": "Bir halka boyunca dizilmiş kartlar: içeriden bakınca kenarları renk saçılımıyla camdan geçer, dışarıdan bakınca alan derinliği oluşur; kartların üzerinde akan bir akışkan gradyan vardır.",
        "notes": "<p>Sıradan bir kart karuseli, sağa sola kayan tek bir kart sırasından ibarettir. Aynı sırayı bir halka boyunca dizince kartlar uzaklık kazanır: içeriden bakınca yandaki kartlar izleyeni çevreler; dışarıdan bakınca orta net kalır, uzaklaştıkça bulanıklaşır. Öne çıkan noktalar:</p>\n        <ol>\n        <li><strong>İki görünüm</strong>: kartlar tek bir yay boyunca dizilir. Eğrilik pozitifken izleyen halkanın içinde, negatifken dışındadır. Geçişte eğrilik sürekli değişince bütün sıra bir halkadan diğerine yumuşakça bükülür.</li>\n        <li><strong>İçeride</strong>: portfolyo ve galeri gibi sakin sakin gezilen içerikler için uygundur. İzleyen halkanın merkezinin biraz arkasında durur, perspektif 860px; yandaki kartlar daha yakın ve büyüktür, ekrana beş kart sığar.</li>\n        <li><strong>Cam kenar</strong>: ekranın iki yanında 160px genişliğinde birer cam şerit vardır. Dış kenara yaklaştıkça görüntü merkeze daha yakın yerden alınır, bu yüzden kartların üst ve alt kenarları dışa açılır; kırmızı maviden daha çok kayar ve yumuşak bir renk saçılımı oluşur.</li>\n        <li><strong>Dışarıda ve alan derinliği</strong>: kapak seçmek gibi bir seferde tek şeye bakılan durumlar için uygundur. Halka göz hizasından görülür, perspektif 1500px; orta net kalır, yanlar ve arka sıra giderek bulanıklaşıp soluklaşır. Bulanıklık her piksel için ayrı hesaplanır, dönerken titreme olmaz.</li>\n        <li><strong>Akışkan gradyan ve ters dönme</strong>: her kartın ön yüzü, dört renkten oluşan ve daire çizerek yavaşça akan, kesintisiz döngüye giren bir akışkan gradyandır. Dış görünüme geçince kartlar ortadan yanlara doğru sırayla ters döner ve arkalarındaki görseli gösterir.</li>\n        </ol>\n        <p>Ayrıca kartlarda gölge ve yansıma yoktur; beyaz zeminde kirli görünür, uzaklık yalnızca boyut, bulanıklık ve soluklukla verilir. “Hareketi azalt” açıkken gradyanlar akmaz ve görünüm hemen değişir.</p>\n        <h2>Parametreler</h2>\n        <dl class=\"params\">\n        <dt>Kartlar</dt><dd>180 × 300px, 18px aralıklı, toplam 22; halka yarıçapı yaklaşık 693px</dd>\n        <dt>İçeride</dt><dd>perspektif 860px; cam kenar 160px, kayma genişliğinin 0,4 katı, azalma üssü 2,4; renk saçılımı %25</dd>\n        <dt>Dışarıda</dt><dd>perspektif 1500px; bulanıklık merkezden 110px ötede başlar, en fazla 14px; arka sıra %50 soluk</dd>\n        <dt>Akışkan</dt><dd>4 renk, iki kez bükülen 3 katman gürültü; saniyede 0,2 gürültü hücresi akar</dd>\n        <dt>Köşeler</dt><dd>sürekli köşeler, superellipse(2), 32px</dd>\n        <dt>Geçiş</dt><dd>görünüm 1100ms; ters dönme 1800ms, ortadan yanlara</dd>\n        </dl>\n        <p>Ekteki Prompt önce efektin nereye konacağını, kartlarda ne olacağını, hangi görünümle açılacağını ve ayar panelini kimin göreceğini sorar; onayladıktan sonra efekti videodaki değerlerle kurar ve değerleri canlı ayarlamak için bir kaydırıcı paneli ekler.</p>"
      }
    }
  },
  "privacy": {
    "en": "<h1>Privacy Policy</h1>\n    <p class=\"policy-date\">Last updated and effective: November 18, 2026</p>\n    <p class=\"policy-lead\">Vibe Design Tips (vibedesign.tips, “the site”, “we” or “us”) is a free website of design tips, run by an independent developer. You can read everything on the site without signing in; signing in is needed only to save tips, highlight passages and download Skills. This policy explains what information we collect, how we use and keep it, and the rights you have. Please read it before signing in.</p>\n\n    <h2>1. Information we collect</h2>\n    <h3>1.1 When you sign in</h3>\n    <p>When you sign in with Google, GitHub or X, we ask only to read your public profile, and we store:</p>\n    <ul>\n      <li>Your account identifier: the user ID that Google, GitHub or X provides, used to recognise the same account;</li>\n      <li>Your display name and the address of your profile picture, and, if you sign in with GitHub or X, your username (@handle).</li>\n    </ul>\n    <p>This information is refreshed from your Google, GitHub or X profile each time you sign in.</p>\n    <h3>1.2 When you use the site’s features</h3>\n    <p>Once you are signed in, the following is stored with your account:</p>\n    <ul>\n      <li>the tips you save;</li>\n      <li>the passages you highlight;</li>\n      <li>records of your reader keys: a hash of each key and its last four characters, when it was created, when it was last used, and how many reads it made that day. We do not store the keys themselves.</li>\n    </ul>\n    <h3>1.3 Information we do not collect</h3>\n    <p>We do not read your email address, we do not keep access tokens from Google, GitHub or X (the GitHub token is revoked as soon as your profile has been read), and we never post anything on your behalf. X’s consent screen lists permission to read posts; X requires it together with access to your profile, and the site does not use it.</p>\n\n    <h2>2. How we use information</h2>\n    <p>We use the information above only to:</p>\n    <ul>\n      <li>recognise your account and keep you signed in;</li>\n      <li>provide saving, highlighting and reader keys, and keep them in sync across your devices;</li>\n      <li>show the first 999 accounts (early members) in the site’s public member list, by display name and profile picture and in the order they signed up, unless the member turns this off;</li>\n      <li>prevent abuse and protect the site and your account;</li>\n      <li>count visits so that we can improve the site’s content.</li>\n    </ul>\n    <p>We do not use your information for advertising or profiling.</p>\n\n    <h2>3. Cookies and local storage</h2>\n    <ul>\n      <li>Sign-in cookie: keeps you signed in. It expires after 30 days and is cleared when you sign out;</li>\n      <li>Sign-in marker cookie: contains no personal information and only tells the page that this device may be signed in, so that visitors who are not signed in make no account request;</li>\n      <li>Your browser’s local storage: keeps preferences such as theme, language and the sign-in method you used last. It stays on your device and is not sent to us.</li>\n    </ul>\n    <p>The site uses no advertising or cross-site tracking cookies.</p>\n\n    <h2>4. Third-party services</h2>\n    <p>We rely on the following services to run the site. Each handles information only as far as needed to provide its service:</p>\n    <ul>\n      <li>Cloudflare: hosts the site and its database and handles network requests;</li>\n      <li>Google, GitHub and X: verify your identity when you choose to sign in with them;</li>\n      <li>Umami: counts page views and feature use. It uses no cookies, records only totals, and does not identify anyone.</li>\n    </ul>\n    <p>We do not sell your information or give it to anyone else, except where the law requires it.</p>\n\n    <h2>5. Storage and retention</h2>\n    <ul>\n      <li>Your profile, saves, highlights and reader key records are kept in Cloudflare’s database until you delete your account;</li>\n      <li>Sign-in sessions expire after 30 days;</li>\n      <li>To prevent abuse, sign-ins and API requests are counted per IP address. The counts are used only for rate limits, lapse by the next midnight (UTC) at the latest, and are then deleted.</li>\n    </ul>\n    <p>Cloudflare operates its network in many regions, so your information may be processed outside the country or region where you live.</p>\n\n    <h2>6. Security</h2>\n    <p>All traffic to the site is encrypted with HTTPS. Sign-in session tokens and reader keys are stored only as hashes, so a leak of the database could not be used to sign in or to read. No online service can promise absolute security, however; if a security incident occurs, we will announce it promptly on the site and on X.</p>\n\n    <h2>7. Your rights</h2>\n    <ul>\n      <li>Access: once signed in, you can see your profile, saves and reader keys in the account menu;</li>\n      <li>Correction: your name and picture follow your Google, GitHub or X profile; change them there and sign in again;</li>\n      <li>Deleting content: you can remove saves, delete highlights or revoke reader keys at any time;</li>\n      <li>Member list: if you are an early member, you can leave your name and picture out of the public member list at any time with the switch in the list, which opens from the 999 nameplate in the account menu. Your place then shows only as taken;</li>\n      <li>Signing out: clears the sign-in on this device;</li>\n      <li>Deleting your account: send a direct message to <a href=\"https://x.com/kubai087\">@kubai087</a> on X with how you signed in and your display name. Deleting your account removes your profile, saves, highlights and reader keys together, and cannot be undone.</li>\n    </ul>\n\n    <h2>8. About the ways to sign in</h2>\n    <div class=\"policy-callout\">\n      <p>Signing in with Google, with GitHub and with X creates three separate accounts. Saves, highlights and reader keys belong to one account and do not carry over to the others; they cannot be merged at present.</p>\n      <p>We recommend signing in the same way each time. The sign-in dialog marks the method this device used last.</p>\n    </div>\n\n    <h2>9. Children</h2>\n    <p>The site is intended for a general audience and is not directed at children under 14. We do not knowingly collect personal information from children; if you believe a child has signed in without a parent’s or guardian’s consent, please contact us and we will delete the account.</p>\n\n    <h2>10. Changes to this policy</h2>\n    <p>We may update this policy as the site’s features change. When we do, we will update this page and the date above, and for significant changes we will also give notice in a prominent place on the site.</p>\n\n    <h2>11. Contact us</h2>\n    <p>If you have any questions about this policy or your personal information, please contact <a href=\"https://x.com/kubai087\">@kubai087</a> on X.</p>",
    "text": "<h1>Gizlilik Politikası</h1>\n    <p class=\"policy-date\">Son güncelleme ve yürürlük tarihi: 18 Kasım 2026</p>\n    <p class=\"policy-lead\">Vibe Design Tips (vibedesign.tips; “site”, “biz”), bağımsız bir geliştirici tarafından işletilen ücretsiz bir tasarım ipuçları sitesidir. Sitedeki her şeyi giriş yapmadan okuyabilirsiniz; giriş yalnızca ipuçlarını kaydetmek, metin vurgulamak ve Skill indirmek için gerekir. Bu politika hangi bilgileri topladığımızı, bunları nasıl kullandığımızı ve sakladığımızı ve sahip olduğunuz hakları açıklar. Lütfen giriş yapmadan önce okuyun.</p>\n\n    <h2>1. Topladığımız bilgiler</h2>\n    <h3>1.1 Giriş yaptığınızda</h3>\n    <p>Google, GitHub veya X ile giriş yaptığınızda yalnızca herkese açık profilinizi okuma izni isteriz ve şunları saklarız:</p>\n    <ul>\n      <li>Hesap tanımlayıcınız: Google, GitHub veya X’in sağladığı ve aynı hesabı tanımak için kullanılan kullanıcı kimliği;</li>\n      <li>Görünen adınız ve profil resminizin adresi; GitHub veya X ile giriş yaptıysanız kullanıcı adınız (@handle).</li>\n    </ul>\n    <p>Bu bilgiler her girişte Google, GitHub veya X profilinizden güncellenir.</p>\n    <h3>1.2 Sitenin özelliklerini kullandığınızda</h3>\n    <p>Giriş yaptıktan sonra aşağıdakiler hesabınızla birlikte saklanır:</p>\n    <ul>\n      <li>kaydettiğiniz ipuçları;</li>\n      <li>vurguladığınız metin parçaları;</li>\n      <li>okuma anahtarlarınıza ait kayıtlar: her anahtarın karması (hash) ve son dört karakteri, oluşturulma zamanı, son kullanılma zamanı ve o gün yapılan okuma sayısı. Anahtarların kendisini saklamayız.</li>\n    </ul>\n    <h3>1.3 Toplamadığımız bilgiler</h3>\n    <p>E-posta adresinizi okumayız, Google, GitHub veya X erişim belirteçlerini saklamayız (GitHub belirteci, profiliniz okunur okunmaz iptal edilir) ve sizin adınıza hiçbir şey paylaşmayız. X’in izin ekranında gönderileri okuma izni yer alır; X bu izni profil erişimiyle birlikte zorunlu tutar, site ise bu izni kullanmaz.</p>\n\n    <h2>2. Bilgileri nasıl kullanırız</h2>\n    <p>Yukarıdaki bilgileri yalnızca şu amaçlarla kullanırız:</p>\n    <ul>\n      <li>hesabınızı tanımak ve oturumunuzu açık tutmak;</li>\n      <li>kaydetme, vurgulama ve okuma anahtarı özelliklerini sunmak ve bunları cihazlarınız arasında eşitlemek;</li>\n      <li>ilk 999 hesabı (erken üyeleri) görünen ad ve profil resmiyle, kayıt sırasına göre sitenin herkese açık üye listesinde göstermek (üye bunu kapatmadıkça);</li>\n      <li>kötüye kullanımı önlemek ve siteyi ve hesabınızı korumak;</li>\n      <li>sitenin içeriğini geliştirebilmek için ziyaretleri saymak.</li>\n    </ul>\n    <p>Bilgilerinizi reklam veya profil oluşturma amacıyla kullanmayız.</p>\n\n    <h2>3. Çerezler ve yerel depolama</h2>\n    <ul>\n      <li>Oturum çerezi: oturumunuzu açık tutar. 30 gün sonra sona erer ve çıkış yaptığınızda silinir;</li>\n      <li>Oturum işareti çerezi: kişisel bilgi içermez ve sayfaya yalnızca bu cihazda oturum açık olabileceğini bildirir; böylece giriş yapmamış ziyaretçiler hesap isteği göndermez;</li>\n      <li>Tarayıcınızın yerel depolama alanı: tema, dil ve en son kullandığınız giriş yöntemi gibi tercihleri saklar. Cihazınızda kalır ve bize gönderilmez.</li>\n    </ul>\n    <p>Site reklam çerezi veya siteler arası izleme çerezi kullanmaz.</p>\n\n    <h2>4. Üçüncü taraf hizmetler</h2>\n    <p>Siteyi çalıştırmak için aşağıdaki hizmetlerden yararlanırız. Her biri bilgileri yalnızca kendi hizmetini sunmak için gereken ölçüde işler:</p>\n    <ul>\n      <li>Cloudflare: siteyi ve veritabanını barındırır ve ağ isteklerini işler;</li>\n      <li>Google, GitHub ve X: bunlarla giriş yapmayı seçtiğinizde kimliğinizi doğrular;</li>\n      <li>Umami: sayfa görüntülemelerini ve özellik kullanımını sayar. Çerez kullanmaz, yalnızca toplamları kaydeder ve kimseyi tanımlamaz.</li>\n    </ul>\n    <p>Yasanın gerektirdiği durumlar dışında bilgilerinizi satmayız ve başka kimseyle paylaşmayız.</p>\n\n    <h2>5. Saklama ve saklama süresi</h2>\n    <ul>\n      <li>Profiliniz, kayıtlarınız, vurgularınız ve okuma anahtarı kayıtlarınız, hesabınızı silene kadar Cloudflare’in veritabanında saklanır;</li>\n      <li>Giriş oturumları 30 gün sonra sona erer;</li>\n      <li>Kötüye kullanımı önlemek için girişler ve API istekleri IP adresi başına sayılır. Bu sayılar yalnızca istek sınırları için kullanılır, en geç bir sonraki gece yarısı (UTC) geçerliliğini yitirir ve ardından silinir.</li>\n    </ul>\n    <p>Cloudflare ağını birçok bölgede işlettiği için bilgileriniz yaşadığınız ülke veya bölge dışında işlenebilir.</p>\n\n    <h2>6. Güvenlik</h2>\n    <p>Siteye giden tüm trafik HTTPS ile şifrelenir. Giriş oturumu belirteçleri ve okuma anahtarları yalnızca karma (hash) olarak saklanır; bu nedenle veritabanı sızsa bile bu bilgiler giriş yapmak veya okumak için kullanılamaz. Yine de hiçbir çevrim içi hizmet mutlak güvenlik vaat edemez; bir güvenlik olayı yaşanırsa bunu sitede ve X’te hemen duyururuz.</p>\n\n    <h2>7. Haklarınız</h2>\n    <ul>\n      <li>Erişim: giriş yaptıktan sonra profilinizi, kayıtlarınızı ve okuma anahtarlarınızı hesap menüsünde görebilirsiniz;</li>\n      <li>Düzeltme: adınız ve resminiz Google, GitHub veya X profilinizi izler; bunları orada değiştirip tekrar giriş yapın;</li>\n      <li>İçerik silme: kayıtlarınızı kaldırabilir, vurgularınızı silebilir veya okuma anahtarlarınızı istediğiniz zaman iptal edebilirsiniz;</li>\n      <li>Üye listesi: erken üyeyseniz, hesap menüsündeki 999 isim plaketinden açılan listedeki anahtarla adınızı ve resminizi istediğiniz zaman herkese açık üye listesinin dışında tutabilirsiniz. Bu durumda yeriniz yalnızca dolu olarak görünür;</li>\n      <li>Çıkış yapma: bu cihazdaki oturumu kapatır;</li>\n      <li>Hesabınızı silme: X’te <a href=\"https://x.com/kubai087\">@kubai087</a> hesabına, nasıl giriş yaptığınızı ve görünen adınızı belirten bir doğrudan mesaj gönderin. Hesabınızı silmek profilinizi, kayıtlarınızı, vurgularınızı ve okuma anahtarlarınızı birlikte kaldırır ve geri alınamaz.</li>\n    </ul>\n\n    <h2>8. Giriş yöntemleri hakkında</h2>\n    <div class=\"policy-callout\">\n      <p>Google ile, GitHub ile ve X ile giriş yapmak üç ayrı hesap oluşturur. Kayıtlar, vurgular ve okuma anahtarları tek bir hesaba aittir ve diğerlerine aktarılmaz; şu anda birleştirilemezler.</p>\n      <p>Her seferinde aynı yöntemle giriş yapmanızı öneririz. Giriş penceresi, bu cihazda en son kullanılan yöntemi işaretler.</p>\n    </div>\n\n    <h2>9. Çocuklar</h2>\n    <p>Site genel bir kitleye yöneliktir ve 14 yaşından küçük çocuklara yönelik değildir. Çocuklardan bilerek kişisel bilgi toplamayız; bir çocuğun ebeveyninin veya vasisinin izni olmadan giriş yaptığını düşünüyorsanız lütfen bizimle iletişime geçin, hesabı sileriz.</p>\n\n    <h2>10. Bu politikadaki değişiklikler</h2>\n    <p>Sitenin özellikleri değiştikçe bu politikayı güncelleyebiliriz. Güncellediğimizde bu sayfayı ve yukarıdaki tarihi değiştiririz; önemli değişiklikleri ayrıca sitede göze çarpan bir yerde duyururuz.</p>\n\n    <h2>11. Bize ulaşın</h2>\n    <p>Bu politika veya kişisel bilgileriniz hakkında sorularınız varsa lütfen X’te <a href=\"https://x.com/kubai087\">@kubai087</a> hesabına yazın.</p>"
  }
}
