011 Easing Curves
Como escolher curvas de easing para cada situação
Sete curvas de velocidade comuns para animações, de Linear a Spring, e o tipo de movimento a que cada uma se adapta.
O ritmo de uma animação é descrito por uma curva de velocidade: quanto mais íngreme a curva, mais brusca a mudança de velocidade e mais rápido o movimento parece. Se o menu que abre, o diálogo que fecha e o indicador que desliza usam todos o ease padrão, o usuário não distingue se um elemento está aparecendo, sumindo ou mudando de lugar. As curvas mais usadas são estas:
- Linear: para barras de progresso, carregamentos e outras coisas que só precisam parecer “em andamento”. Movimento uniforme, com início e fim bruscos,
linear. - Ease-out e Strong ease-out: na entrada de sobreposições e elementos modais, como toasts, menus, diálogos e painéis laterais, usa-se Ease-out, rápida no começo e lenta no fim,
cubic-bezier(0, 0, .58, 1). Para elementos pequenos que se encaixam logo depois de um clique, como ícones, texto ou uma pílula selecionada, usa-se Strong ease-out, que arranca mais rápido e desacelera por mais tempo,cubic-bezier(.22, 1, .36, 1); é a resposta mais direta. - Ease-in: para saídas, como o fechamento de um diálogo ou um toast que some. Lenta no começo e rápida no fim, sai sem rodeios,
cubic-bezier(.42, 0, 1, 1). Não use em entradas: o início lento faz a interface parecer demorar para responder. - Ease-in-out: para elementos que mudam de lugar dentro da interface, como o indicador sob as abas, a troca de página de um carrossel ou a rolagem suave até uma seção do índice. Lenta nas pontas e mais rápida no meio,
cubic-bezier(.42, 0, .58, 1). - Overshoot: para confirmações pequenas e divertidas, como marcar uma caixa, curtir ou um selo que aparece. Passa do ponto final em cerca de 10% e volta,
cubic-bezier(.34, 1.56, .64, 1). Não use em painéis grandes, senão a interface inteira balança. - Spring: para devolver algo ao lugar depois de soltar, como o retorno de um painel lateral, puxar para atualizar ou o encaixe depois de reordenar por arrasto. Ao chegar, balança uma ou duas vezes antes de parar, mais parecido com um objeto real do que o Overshoot; quando o usuário solta, o elemento já tem velocidade, e a mola continua a partir dela.
Além disso, definindo essas curvas como tokens de movimento e usando cada uma conforme sua função, o produto inteiro mantém o mesmo ritmo.
O prompt que acompanha esta dica lista primeiro todas as transições e animações do projeto, marca onde ainda se usa o ease padrão ou um ease-in numa entrada, e qual curva usar em cada caso; depois acrescenta os tokens de movimento e ajusta uma a uma as curvas e as durações.
Give the motion in my product the right easing curves, so things arrive, leave and move the way they should feel. Work inside my existing code and design system: keep what each animation does, how far it goes and what triggers it. Change how it moves over time, and its duration where that is off. 0. Start from what exists - Find every transition and animation: CSS transitions and keyframes, animation libraries (Framer Motion, GSAP, the Web Animations API) and hand-written requestAnimationFrame loops. List each with its component, its trigger, its duration and its curve. - Flag the ones left on the CSS default `ease`, `linear` on something that moves, and `ease-in` on something that appears. 1. The curves as tokens Define them once, next to the other motion tokens, and use only these: - --ease-out: cubic-bezier(0, 0, .58, 1). Anything that enters: toasts, menus, popovers, dialogs, drawers. - --ease-out-strong: cubic-bezier(.22, 1, .36, 1). Small parts settling in right after a click: an icon, a label, a selected pill. It feels the most responsive. - --ease-in: cubic-bezier(.42, 0, 1, 1). Anything that leaves, and only that: a toast timing out, a dialog or drawer closing, a menu collapsing, a list item swiped away. It starts slow and leaves at full speed, so on an entrance it feels late and then stops with a bump. - --ease-in-out: cubic-bezier(.42, 0, .58, 1). Something that stays on screen and only changes place or size: the indicator under tabs or a segmented control, a carousel turning a page, items making room during a reorder, a sidebar resizing, smooth-scrolling to an anchor. Not for coming in: its slow start reads as lag. - --ease-overshoot: cubic-bezier(.34, 1.56, .64, 1). Runs about 10% past its place and comes back. Small, playful confirmations: a checkbox tick, a like, a badge count popping in, a switch knob settling. Never on a dialog, a drawer or anything larger than about 64px, and not on actions people repeat all day. - --ease-spring: linear(0, .32, .78, 1.04, 1.09, 1.06, 1.02, 1, .99, .99, 1). Things let go after a drag or a swipe, so they settle like an object: a bottom sheet snapping open or back, a card returning after a half swipe, pull-to-refresh springing back, a reordered item dropping into place. Prefer the animation library's own spring fed with the release velocity; use this token only where there is none, and fall back to --ease-out-strong where linear() is not supported. - linear: only for things that run rather than move: spinners, progress bars, marquees. - The CSS default `ease` is not a choice. Replace it wherever a curve was left unset. 2. Durations - Small UI (toasts, tooltips, menus, checks): 150-250ms in, 120-200ms out. Exits are shorter than entrances. - Medium (dialogs, popovers with content, drawers): 250-350ms. - Large or full-screen (sheets, page transitions): 350-500ms. Longer feels slow. - Springs and overshoots: about 1.5x the plain duration, since the settle takes time. - Keep the durations as tokens beside the curves (--duration-sm, -md, -lg). 3. Apply them by role - Entrances: ease-out, coming from where the thing belongs (a toast from the top edge, a menu from its trigger), over a short distance (8-24px), growing from 96% and fading in a little sooner than it moves. A light blur (about 8px) that clears as it lands is a nice touch on toasts. - Exits: ease-in, the same path reversed, and shorter. - Moves on screen: ease-in-out. - Parts inside something that has just appeared (its icon, its text, a count) may follow 100-200ms later on the strong ease-out, so it lands in steps rather than all at once. - Gestures: while the pointer or finger moves, follow it 1:1 with no easing. On release, finish on the spring, from the release velocity if the library allows. - Hover and press: 100-150ms ease-out. Never animate layout on hover. - Animate transform and opacity (filter sparingly), not top, left, width or height, which lay out and repaint every frame. 4. Keep it consistent and accessible - One curve per role across the product. Don't tune each component by hand. - Respect prefers-reduced-motion: keep the opacity changes, drop movement and scale, and turn springs and overshoots into a plain 150ms fade. - Never make a user wait on an animation: nothing blocks input, and a new action interrupts the old animation from where it is. 5. Deliver - First list every animation you found, its current curve and duration, and the role and curve you will give it. - Then add the tokens, switch each animation over, and list every file you touched. - Don't change what animates, how far it goes or what triggers it. If an animation has no clear role, ask me first.





















