011 Easing Curves
상황에 맞는 이징 곡선 고르기
Linear부터 Spring까지, 자주 쓰는 일곱 가지 애니메이션 속도 곡선이 각각 어떤 동작에 맞는지 다룹니다.
애니메이션의 리듬은 속도 곡선으로 나타냅니다. 곡선이 가파를수록 속도 변화가 크고 더 빨라 보입니다. 메뉴가 나타나고, 대화상자가 닫히고, 표시 막대가 미끄러지는 동작에 모두 기본값 ease를 쓰면, 사용자는 요소가 나타나는지, 사라지는지, 자리를 옮기는지 구분할 수 없습니다. 자주 쓰는 곡선은 다음과 같습니다.
- Linear: 진행 막대나 로딩처럼 그냥 ‘돌아가고 있는’ 것으로 보이는 것에 씁니다. 일정한 속도로 움직이며 시작과 끝이 모두 딱딱합니다.
linear. - Ease-out과 Strong ease-out: Toast, 메뉴, 대화상자, 드로어처럼 떠 있는 요소와 모달 요소의 등장에는 빠르게 시작해 느려지는 Ease-out을 씁니다.
cubic-bezier(0, 0, .58, 1). 아이콘, 글자, 선택된 캡슐처럼 클릭 후 곧바로 자리를 잡는 작은 요소에는 시작이 더 빠르고 마무리가 더 긴 Strong ease-out을 씁니다.cubic-bezier(.22, 1, .36, 1)이며, 반응이 가장 즉각적으로 느껴집니다. - Ease-in: 대화상자가 닫히거나 Toast가 사라지는 것처럼 요소의 퇴장에 씁니다. 느리게 시작해 빨라지며 깔끔하게 떠납니다.
cubic-bezier(.42, 0, 1, 1). 등장에는 쓰지 않습니다. 시작이 느려서 인터페이스 반응이 굼뜬 것처럼 보입니다. - Ease-in-out: 탭 아래에서 미끄러지는 표시 막대, 캐러셀 넘기기, 목차의 부드러운 스크롤처럼 화면 안에서 자리를 옮기는 요소에 씁니다. 양 끝이 느리고 가운데가 가장 빠릅니다.
cubic-bezier(.42, 0, .58, 1). - Overshoot: 체크, 좋아요, 배지 표시처럼 작고 경쾌한 확인에 씁니다. 끝점을 약 10% 지나쳤다가 돌아옵니다.
cubic-bezier(.34, 1.56, .64, 1). 큰 패널에는 쓰지 않습니다. 그러면 화면 전체가 흔들립니다. - Spring: 드로어가 되튀는 동작, 당겨서 새로고침, 드래그 정렬 후 자리 잡기처럼 손을 뗀 뒤 제자리로 돌아가는 동작에 씁니다. 도착한 뒤 한두 번 살짝 흔들리다 멈춰서 Overshoot보다 실제 물체처럼 보입니다. 사용자가 손을 뗄 때 요소에는 이미 속도가 있고, 스프링은 그 속도를 이어받아 움직일 수 있습니다.
또한 이 곡선들을 모션 토큰으로 정의하고 역할에 따라 쓰면, 제품 전체의 리듬을 일관되게 유지할 수 있습니다.
함께 제공하는 Prompt는 먼저 프로젝트의 모든 전환과 애니메이션을 나열하고, 아직 기본 ease를 쓰거나 등장에 ease-in을 쓴 곳과 각각 바꿀 곡선을 표시합니다. 그다음 모션 토큰을 추가하고 곡선과 시간을 하나씩 조정합니다.
Give the motion in my product the right easing curves, so things arrive, leave and move the way they should feel. Work inside my existing code and design system: keep what each animation does, how far it goes and what triggers it. Change how it moves over time, and its duration where that is off. 0. Start from what exists - Find every transition and animation: CSS transitions and keyframes, animation libraries (Framer Motion, GSAP, the Web Animations API) and hand-written requestAnimationFrame loops. List each with its component, its trigger, its duration and its curve. - Flag the ones left on the CSS default `ease`, `linear` on something that moves, and `ease-in` on something that appears. 1. The curves as tokens Define them once, next to the other motion tokens, and use only these: - --ease-out: cubic-bezier(0, 0, .58, 1). Anything that enters: toasts, menus, popovers, dialogs, drawers. - --ease-out-strong: cubic-bezier(.22, 1, .36, 1). Small parts settling in right after a click: an icon, a label, a selected pill. It feels the most responsive. - --ease-in: cubic-bezier(.42, 0, 1, 1). Anything that leaves, and only that: a toast timing out, a dialog or drawer closing, a menu collapsing, a list item swiped away. It starts slow and leaves at full speed, so on an entrance it feels late and then stops with a bump. - --ease-in-out: cubic-bezier(.42, 0, .58, 1). Something that stays on screen and only changes place or size: the indicator under tabs or a segmented control, a carousel turning a page, items making room during a reorder, a sidebar resizing, smooth-scrolling to an anchor. Not for coming in: its slow start reads as lag. - --ease-overshoot: cubic-bezier(.34, 1.56, .64, 1). Runs about 10% past its place and comes back. Small, playful confirmations: a checkbox tick, a like, a badge count popping in, a switch knob settling. Never on a dialog, a drawer or anything larger than about 64px, and not on actions people repeat all day. - --ease-spring: linear(0, .32, .78, 1.04, 1.09, 1.06, 1.02, 1, .99, .99, 1). Things let go after a drag or a swipe, so they settle like an object: a bottom sheet snapping open or back, a card returning after a half swipe, pull-to-refresh springing back, a reordered item dropping into place. Prefer the animation library's own spring fed with the release velocity; use this token only where there is none, and fall back to --ease-out-strong where linear() is not supported. - linear: only for things that run rather than move: spinners, progress bars, marquees. - The CSS default `ease` is not a choice. Replace it wherever a curve was left unset. 2. Durations - Small UI (toasts, tooltips, menus, checks): 150-250ms in, 120-200ms out. Exits are shorter than entrances. - Medium (dialogs, popovers with content, drawers): 250-350ms. - Large or full-screen (sheets, page transitions): 350-500ms. Longer feels slow. - Springs and overshoots: about 1.5x the plain duration, since the settle takes time. - Keep the durations as tokens beside the curves (--duration-sm, -md, -lg). 3. Apply them by role - Entrances: ease-out, coming from where the thing belongs (a toast from the top edge, a menu from its trigger), over a short distance (8-24px), growing from 96% and fading in a little sooner than it moves. A light blur (about 8px) that clears as it lands is a nice touch on toasts. - Exits: ease-in, the same path reversed, and shorter. - Moves on screen: ease-in-out. - Parts inside something that has just appeared (its icon, its text, a count) may follow 100-200ms later on the strong ease-out, so it lands in steps rather than all at once. - Gestures: while the pointer or finger moves, follow it 1:1 with no easing. On release, finish on the spring, from the release velocity if the library allows. - Hover and press: 100-150ms ease-out. Never animate layout on hover. - Animate transform and opacity (filter sparingly), not top, left, width or height, which lay out and repaint every frame. 4. Keep it consistent and accessible - One curve per role across the product. Don't tune each component by hand. - Respect prefers-reduced-motion: keep the opacity changes, drop movement and scale, and turn springs and overshoots into a plain 150ms fade. - Never make a user wait on an animation: nothing blocks input, and a new action interrupts the old animation from where it is. 5. Deliver - First list every animation you found, its current curve and duration, and the role and curve you will give it. - Then add the tokens, switch each animation over, and list every file you touched. - Don't change what animates, how far it goes or what triggers it. If an animation has no clear role, ask me first.





















