011 Easing Curves
場面に合わせたイージングカーブの選び方
Linear から Spring まで、よく使う7種類のアニメーションの速度カーブが、それぞれどんな動きに向いているか。
アニメーションのリズムは速度カーブで表します。カーブが急なほど速度の変化が激しく、速く見えます。メニューの表示、ダイアログを閉じる動き、インジケーターのスライドがすべてデフォルトの ease だと、ユーザーには要素が現れているのか、消えているのか、位置を変えているのか区別がつきません。よく使うカーブは次のとおりです:
- Linear:プログレスバーやローディングなど、ただ「動き続けている」ように見えるものに使います。等速で動き、始まりも終わりも硬い印象です。
linear。 - Ease-out と Strong ease-out:Toast、メニュー、ダイアログ、ドロワーなど、オーバーレイやモーダル要素の入場には、速く始まってゆっくり終わる Ease-out を使います。
cubic-bezier(0, 0, .58, 1)。アイコン、文字、選択中のピルなど、クリック後すぐに定位置に収まる小さな要素には、立ち上がりがより速く収まりがより長い Strong ease-out を使います。cubic-bezier(.22, 1, .36, 1)で、反応がいちばん直接的に感じられます。 - Ease-in:ダイアログを閉じる、Toast が消えるなど、要素の退場に使います。ゆっくり始まって速くなり、すっきりと去ります。
cubic-bezier(.42, 0, 1, 1)。入場には使いません。立ち上がりが遅く、画面の反応が鈍いように見えます。 - Ease-in-out:タブの下をスライドするインジケーター、カルーセルのページ送り、目次のスムーズスクロールなど、画面内で位置を変える要素に使います。両端が遅く、中間が最も速くなります。
cubic-bezier(.42, 0, .58, 1)。 - Overshoot:チェック、いいね、バッジの表示など、小さく軽やかな確認に使います。終点を約 10% 行き過ぎてから戻ります。
cubic-bezier(.34, 1.56, .64, 1)。大きなパネルには使いません。画面全体が揺れてしまいます。 - Spring:ドロワーの跳ね返り、プルして更新、ドラッグ並べ替え後の着地など、手を離したあとに定位置へ戻る動きに使います。到着後に1〜2回軽く揺れてから止まり、Overshoot より実物らしく見えます。ユーザーが手を離した時点で要素にはすでに速度があり、スプリングはその速度を引き継いで動けます。
なお、これらのカーブをモーショントークンとして定義し、役割ごとに使うと、プロダクト全体のリズムをそろえられます。
付属の Prompt は、まずプロジェクト内のすべてのトランジションとアニメーションを一覧にし、デフォルトの ease のままの箇所や入場に ease-in を使っている箇所と、それぞれ替えるべきカーブを示します。そのうえでモーショントークンを追加し、カーブと時間を1つずつ調整します。
Give the motion in my product the right easing curves, so things arrive, leave and move the way they should feel. Work inside my existing code and design system: keep what each animation does, how far it goes and what triggers it. Change how it moves over time, and its duration where that is off. 0. Start from what exists - Find every transition and animation: CSS transitions and keyframes, animation libraries (Framer Motion, GSAP, the Web Animations API) and hand-written requestAnimationFrame loops. List each with its component, its trigger, its duration and its curve. - Flag the ones left on the CSS default `ease`, `linear` on something that moves, and `ease-in` on something that appears. 1. The curves as tokens Define them once, next to the other motion tokens, and use only these: - --ease-out: cubic-bezier(0, 0, .58, 1). Anything that enters: toasts, menus, popovers, dialogs, drawers. - --ease-out-strong: cubic-bezier(.22, 1, .36, 1). Small parts settling in right after a click: an icon, a label, a selected pill. It feels the most responsive. - --ease-in: cubic-bezier(.42, 0, 1, 1). Anything that leaves, and only that: a toast timing out, a dialog or drawer closing, a menu collapsing, a list item swiped away. It starts slow and leaves at full speed, so on an entrance it feels late and then stops with a bump. - --ease-in-out: cubic-bezier(.42, 0, .58, 1). Something that stays on screen and only changes place or size: the indicator under tabs or a segmented control, a carousel turning a page, items making room during a reorder, a sidebar resizing, smooth-scrolling to an anchor. Not for coming in: its slow start reads as lag. - --ease-overshoot: cubic-bezier(.34, 1.56, .64, 1). Runs about 10% past its place and comes back. Small, playful confirmations: a checkbox tick, a like, a badge count popping in, a switch knob settling. Never on a dialog, a drawer or anything larger than about 64px, and not on actions people repeat all day. - --ease-spring: linear(0, .32, .78, 1.04, 1.09, 1.06, 1.02, 1, .99, .99, 1). Things let go after a drag or a swipe, so they settle like an object: a bottom sheet snapping open or back, a card returning after a half swipe, pull-to-refresh springing back, a reordered item dropping into place. Prefer the animation library's own spring fed with the release velocity; use this token only where there is none, and fall back to --ease-out-strong where linear() is not supported. - linear: only for things that run rather than move: spinners, progress bars, marquees. - The CSS default `ease` is not a choice. Replace it wherever a curve was left unset. 2. Durations - Small UI (toasts, tooltips, menus, checks): 150-250ms in, 120-200ms out. Exits are shorter than entrances. - Medium (dialogs, popovers with content, drawers): 250-350ms. - Large or full-screen (sheets, page transitions): 350-500ms. Longer feels slow. - Springs and overshoots: about 1.5x the plain duration, since the settle takes time. - Keep the durations as tokens beside the curves (--duration-sm, -md, -lg). 3. Apply them by role - Entrances: ease-out, coming from where the thing belongs (a toast from the top edge, a menu from its trigger), over a short distance (8-24px), growing from 96% and fading in a little sooner than it moves. A light blur (about 8px) that clears as it lands is a nice touch on toasts. - Exits: ease-in, the same path reversed, and shorter. - Moves on screen: ease-in-out. - Parts inside something that has just appeared (its icon, its text, a count) may follow 100-200ms later on the strong ease-out, so it lands in steps rather than all at once. - Gestures: while the pointer or finger moves, follow it 1:1 with no easing. On release, finish on the spring, from the release velocity if the library allows. - Hover and press: 100-150ms ease-out. Never animate layout on hover. - Animate transform and opacity (filter sparingly), not top, left, width or height, which lay out and repaint every frame. 4. Keep it consistent and accessible - One curve per role across the product. Don't tune each component by hand. - Respect prefers-reduced-motion: keep the opacity changes, drop movement and scale, and turn springs and overshoots into a plain 150ms fade. - Never make a user wait on an animation: nothing blocks input, and a new action interrupts the old animation from where it is. 5. Deliver - First list every animation you found, its current curve and duration, and the role and curve you will give it. - Then add the tokens, switch each animation over, and list every file you touched. - Don't change what animates, how far it goes or what triggers it. If an animation has no clear role, ask me first.





















