Vibe Design Tips

押すと沈むスキューモーフィズムボタン

001 Skeuomorphic Buttons

押すと沈むスキューモーフィズムボタン

コンポーネントビジュアルエフェクト

クリックの手応えがあるスキューモーフィズムボタン:5つの階層と5層の素材、ホバー時と押下時の光と影の変化。ダッシュボードやツール系プロダクトに向いています。

フラットなボタンは押しても色が少し濃くなるだけのことが多く、素早くクリックすると変化がほとんど見えません。スキューモーフィズムボタンは押すと沈み込み、位置、グラデーション、シャドウが同時に変わるので、押したことを確かめられます。ポイントは次の5つです:

  1. 5つの階層:ボタンが多く色の少ないダッシュボード、エディタ、設定画面に向いており、主従は明暗と素材でしか区別できません。強いものから順に、primary は濃いスレート色のキー、secondary は盛り上がった白いキー、tertiary は薄いグレーのキー、ghost は通常時に背景色なし、text は文字と細い下線だけです。同じ領域に置く primary は1つだけにします。
  2. 5層の素材:背景色のある3つの階層は、どれも同じ5層でできています。上端が 6〜8% 明るいグラデーション面、グラデーションの下端より1段濃い 1px の枠線、上端の白いハイライト、下端の暗い線、そして接地シャドウと柔らかいドロップシャドウの2層です。階層ごとに違うのは値だけなので、5層を1組のトークンとして定義し、階層ごとに値を割り当てます。
  3. ホバーと押下:ホバー時はキーの面を1段明るくし、ドロップシャドウを大きくします。押したときは 1px 下げ、グラデーションの上下を反転し、ドロップシャドウをほぼ接地するまで縮め、上端のハイライトをインナーシャドウに変えます。通常時と押下時のインナーシャドウの層数をそろえ、足りない分を透明なシャドウで補うと、シャドウが滑らかに切り替わります。
  4. 光源と色:光源は真上に固定し、ハイライトは常に上端、暗い線は常に下端に置くと、ボタン全体が同じ空間にあるように見えます。ニュートラルグレーだけを使い、ブランドカラーは使わず、階層は明暗で区別します。鏡面ハイライト、外側の発光、広い範囲のぼかしも使いません。
  5. 文字サイズに合わせた拡大縮小:高さ、パディング、角丸、枠線、各シャドウのオフセットとぼかしは、すべて単位 u = 文字サイズ / 14 の倍数で書きます。文字が 14px なら u = 1px でボタンの高さは 40px、16px なら u ≈ 1.14px で高さは約 45.7px になり、シャドウも同じ比率で大きくなります。

パラメーター

サイズ
ラベル 14px;高さ 40px;角丸 10px;左右パディング 18px
押下
1px 下がる;ドロップシャドウは 0 1px 1px に縮小
時間
移動 120ms;シャドウ 140ms;色 160ms

付属の Prompt は、まずプロジェクトにある既存のボタンコンポーネントを改修し、元のインターフェースとアクセシビリティ設定はそのまま残します。ボタンコンポーネントがない場合にだけ、新しく作成します。

PromptClaude Code や Cursor などのエージェントに貼り付けて使えます
Define a tactile, skeuomorphic Button component with five variants, from
strongest to weakest: primary, secondary, tertiary, ghost, text.
If the project already has a component library or design system, do not
add a new component: restyle its existing Button through its own variant
and token system, and keep its API, props and accessibility as they are.
Otherwise create one reusable Button with `variant` and `size` props.

Style: calm and precise, like the Lumno browser extension and the Cloudflare
dashboard. Neutral grays only, no brand hues. Lit from straight above.
No glossy Web 2.0 shine, no glow, no large blur.

Variants:
1. primary   - near-black slate face (#404859 -> #273042), white label
2. secondary - raised white key (#FFFFFF -> #F4F5F7), dark gray label
3. tertiary  - soft gray key (#F3F4F6 -> #E7E9EC), dark gray label
4. ghost     - no face at rest; faint gray fill on hover; a recessed well
               when pressed
5. text      - gray label with a thin underline and an arrow that nudges
               right on hover

Every filled variant is the same five material layers; only the values
change, so define them once as tokens and let each variant set its own:
1. Face: 180deg linear gradient, top 6-8% lighter than bottom.
2. Edge: 1px solid border one step darker than the bottom of the face
   (primary #12161F, secondary rgba(15,23,42,.14), tertiary rgba(15,23,42,.1)).
3. Top highlight: inset 0 1px 0 white (18% on slate, 85-100% on light
   faces). Put every inset layer in the button's own box-shadow, before the
   drop layers, never on a pseudo-element overlay: inset shadows on the
   element follow the inner radius (outer radius minus border), so the
   corners line up in every state.
4. Bottom shade: inset 0 -1px 0 black (22% on slate, 6% on light faces).
5. Drop shadow in two layers: a tight contact shadow 0 1px 2px plus a soft
   lift 0 4px 10px -3px (18% and 28% on slate, about a third of that on
   light faces).

States (hover, pressed/active, focus-visible, disabled):
- Hover: face one step lighter; the lift grows to 0 8px 16px -5px.
- Pressed: translateY(1px); flip the gradient (darker on top); the outer
  shadow collapses to 0 1px 1px; the top highlight becomes an inner shadow,
  inset 0 1px 2px black (40% on slate, 12-16% on light faces). Light faces
  keep a 1px white line below, 0 1px 0 rgba(255,255,255,.9), like a key
  pressed into paper.
- Give rest and pressed the same number of inset layers (pad with
  inset 0 0 0 transparent) so the shadow animates instead of jumping.
- Focus-visible and disabled follow the library's existing conventions.
- Timing: 120ms for transform, 140ms for shadows, 160ms for colors.

Sizes: all values above are for the 14px label size: height 40px,
padding 0 18px, radius 10px, label weight 600, optional 16px leading icon.
On the slate face add a label text-shadow 0 -1px 0 rgba(0,0,0,.28).
Scale the material with the type, never keep it at fixed pixels: express
every length (height, padding, radius, border, icon, the 1px press offset,
and every shadow offset, blur and spread) as a multiple of a size unit
u = label size / 14. Provide two sizes: md (14px label, u = 1px) and
lg (16px label, u = 16/14 px, so height 45.7px, radius 11.4px, lift shadow
0 4.6px 11.4px -3.4px).