Vibe Design Tips

Hiệu ứng ASCII và dither

003 ASCII and Dither

Hiệu ứng ASCII và dither

Hiệu ứng

Thêm hiệu ứng ASCII và Dither cho hình ảnh và video trên trang đăng nhập, website sản phẩm hoặc thẻ, có thể điều chỉnh độ mạnh bất cứ lúc nào.

ASCII và Dither vẽ lại hình ảnh bằng ký tự hoặc vân điểm ảnh theo độ sáng, giữ cấu trúc sáng tối và bỏ đi chi tiết của ảnh chụp; mọi thông số đều điều chỉnh được, cùng một ảnh vừa có thể làm hình ảnh chính, vừa có thể lùi về làm vân nền. Có năm điểm chính:

  1. ASCII: hợp với cảm giác terminal, mã nguồn, chẳng hạn trang đăng nhập của công cụ cho lập trình viên. Chia khung hình thành lưới, mỗi ô được thay bằng một ký tự theo độ sáng, từ “.” đến “@” dày dần; kích thước là cỡ chữ, khoảng cách là độ thưa dày của lưới, cường độ lấy mẫu là độ tương phản sáng tối.
  2. Dither: hợp với cảm giác chấm in lưới hoặc hạt điểm ảnh. Chia khung hình thành các khối điểm ảnh, dùng ma trận Bayer 4×4 làm ngưỡng, nén mỗi màu xuống vài mức, nhìn từ xa thì hòa thành các mức xám trung gian; kích thước là khối điểm ảnh, khoảng cách là tỉ lệ của vân, cường độ lấy mẫu càng cao thì số mức màu càng ít, hạt càng rõ.
  3. Mặt nạ: dùng được cho cả hai hiệu ứng. Phủ một lớp chuyển màu theo chiều dọc lên khung hình để khung hình lùi lại, hiệu ứng giống vân nền hơn là nhiễu; khi hiệu ứng làm khó đọc chữ phía trên, hãy tăng mặt nạ trước.
  4. Vùng lấy mẫu: chỉ dùng cho ASCII, quyết định ký tự được vẽ ở vùng tối hay vùng sáng, chọn theo độ sáng tối nơi chủ thể nằm. Cảnh thành phố về đêm có chủ thể là ánh đèn, lấy mẫu vùng sáng; ảnh sản phẩm màu tối trên nền trắng, lấy mẫu vùng tối.
  5. Tông màu: có thể giữ màu gốc, hoặc chọn một trong năm bộ màu, trước tiên ánh xạ độ sáng tối của ảnh sang bộ màu đó rồi mới tạo hiệu ứng, để phong cách của các ảnh khác nhau giữ được nhất quán.

Thông số

ASCII
Mặt nạ 90; vùng sắc độ lấy mẫu: vùng tối; cường độ lấy mẫu 100; kích thước 37; khoảng cách 0
Dither
Mặt nạ 88; cường độ lấy mẫu 100; kích thước 15; khoảng cách 0

Prompt đi kèm sẽ xác nhận trước cần xử lý ảnh hay video nào, rồi tạo hiệu ứng cho nó và thêm bên cạnh một bảng thông số có thể điều chỉnh theo thời gian thực.

PromptDán vào một Agent như Claude Code hoặc Cursor
Add an ASCII / ordered-dither effect to one specific image or video in
this project, with a live control panel next to it. Use the asset and the
place I name (an <img>, a <video>, or a file path or URL, and the page or
section it sits in); ask me if I have not named them. Apply the effect to
that asset only, in place: keep its size, position, rounded corners and
anything layered on top of it. If the project already has an image or
canvas effect pipeline, or slider, segmented-control and panel components,
build on them; otherwise create a reusable EffectLayer and EffectPanel.

Settings, one object shared by the layer and the panel:
{ filter: 'ascii' | 'dither', mask, palette, inkTone, strength, size,
  spacing }
Keep separate values per filter, so switching filters brings back that
filter's own settings.

What each control does in each filter, its range, and the recommended
value (ASCII / Dither):
- Mask effect, 0-100 (90 / 88): a vertical veil over the picture so the
  effect reads as texture rather than noise. Same in both filters.
- Color, Original or one of five palettes (Original): gradient-maps the
  asset's luminance into one color family before filtering.
- Sample tones, Shadows | Highlights (Shadows; ASCII only, hidden for
  Dither): which end of the tonal range becomes dense characters.
- Sampling strength, 0-100 (100 / 100). ASCII: contrast of the tone curve
  and how bright and opaque the characters are. Dither: how few levels
  each color channel keeps (8 at 0, 2 at 100) and how fully the quantized
  color replaces the original.
- Size, 0-100 (37 / 15). ASCII: font size, 7-24px. Dither: pixel block,
  2-9px.
- Spacing, 0-100 (0 / 0). ASCII: grid step, 8-24px across and 9-26px
  down, never tighter than the glyphs. Dither: scale of the Bayer
  pattern, 1-4 blocks per matrix cell.

Helpers used throughout:
- range(v, a, b) = a + (b - a) * v / 100
- luminance L = (0.299 R + 0.587 G + 0.114 B) / 255
- s = strength / 100
- "The box" is the asset's rendered size on the page.

Sampling:
- Cover-fit the asset into the box and draw it into a small sampling
  canvas (about 480px on the long side), then read it with getImageData.
  A sample is the pixel under a point in the box, composited over white.
- With a palette, recolor that canvas first: map each pixel's L through a
  256-entry lookup built from the palette's four stops.
- Per image or video frame, take about 12,000 evenly spaced samples:
  low = 8th percentile of L, high = 92nd percentile.
- Shadows means dark ink, Highlights light ink.

ASCII:
- Characters, from empty to full: "  .,:;-=+xX08S#&@" (starts with two
  spaces).
- Font: round(range(size, 7, 24))px monospace (22 instead of 24 when the
  box is under 720px wide), centered in each cell.
- Grid: x step = max(range(spacing, 8, 24), widest glyph * 1.08); line
  height = max(range(spacing, 9, 26), height of "@" * 1.12, font * 1.04).
  The first cell sits half a step in from the edge.
- Tone of a cell: raw = dark ink ? 1 - L : L; normalized = dark ink ?
  (high - L) / (high - low) : (L - low) / (high - low), clamped 0-1 (use
  raw alone when high - low < 0.025); mix = 0.72 + 0.14 s;
  t = raw (1 - mix) + normalized mix. Then a tone curve: black = 0.22 s,
  white = 1 - 0.08 s, lev = clamp((t - black) / (white - black), 0, 1),
  tone = lev (1 - s) + smoothstep(lev) s.
- Skip cells with tone <= 0.02. Character = chars[round(tone * 16)]; skip
  spaces.
- Ink: the sampled color lifted in HSV: value += (1 - value) *
  (0.24 + 0.18 s + 0.24 tone); saturation *= 1 + 0.16 + 0.2 s (clamped).
  Alpha = clamp((0.12 + 0.7 tone) (0.72 + 0.28 s), 0.06, 0.94).

Dither (ordered, Bayer 4x4):
- pixel size = max(2, round(range(size, 2, 9))) (7 instead of 9 under
  720px); pattern scale = max(1, round(range(spacing, 1, 4))); levels =
  max(2, round(range(strength, 8, 2))) per channel; blend =
  range(strength, 0.32, 1).
- Matrix [[0,8,2,10],[12,4,14,6],[3,11,1,9],[15,7,13,5]]; threshold =
  (m + 0.5) / 16, indexed by floor(x / pattern scale), floor(y / pattern
  scale).
- For each block sample its center, push saturation away from luma by
  1 + 0.06 + 0.18 s, then per channel: scaled = c / 255 * (levels - 1);
  q = floor(scaled) + (fraction > threshold ? 1 : 0);
  out = c + (q / (levels - 1) * 255 - c) * blend.
- Write the blocks into a canvas of box / pixel size and draw it scaled up
  with image smoothing off.

Mask and layering:
- The mask is a vertical gradient with stops at the top, 42% and the
  bottom. Base opacities: on a light page white 54/20/38%, on a dark page
  black 44/20/50%. For a mask value v: stop = v <= 50 ? base *
  (v / 50)^1.08 : base + (100 - base) * ((v - 50) / 50)^1.08.
- ASCII: draw the (recolored) picture, the mask, then the characters.
  Dither: draw the dithered picture, then the mask on top.
- Changing filter or palette cross-fades from the last frame over 150ms.

Palettes (four stops at 0, 0.4, 0.74, 1):
- meadow: #2B361F, #677D45, #AEBA78, #E5E1BD
- blue: #192A4D, #326AC5, #A2C2F1, #EDF3FC
- amber: #3C200F, #A74C15, #EF9A46, #F7E7CA
- lavender: #292144, #6552AB, #B3A5E4, #F0ECFB
- mono: #151515, #575757, #A6A6A6, #ECECEC

Rendering:
- Draw into a canvas laid over the asset with the same size and corner
  radius, at devicePixelRatio capped at 1.6x and about 2048 x 2048.
- Image: redraw when a setting changes (debounced 72ms).
- Video: redraw on every new frame (requestVideoFrameCallback, falling
  back to requestAnimationFrame) while it plays and is on screen; keep
  the video element underneath as the source.

Control panel:
- Place it next to the asset, below it when there is room, otherwise
  beside it, never covering it. About 420px wide, centered on the asset.
- Rows, in order: Mask effect, Filter (two tabs: ASCII | Dither), Color
  (round swatches), Sample tones (ASCII only), Sampling strength, Size,
  Spacing (shown with %).
- Each row 46px tall: a 136px label column, then the control. Slider: a
  22px track with 8px radius and a filled part, a 9x30 rounded-rectangle
  thumb (3px radius), a number box with the value centered, and a snap
  mark at 50. Swatches: 22px circles, each filled with its palette's two
  middle stops at 135deg (Original: a tiny crop of the asset); the
  selected one gets a ring with a small gap.
- Every change applies live while dragging. Add a "Reset to recommended"
  action that restores the values above for the current filter.
- Follow the page's light or dark theme and the project's tokens.