011 Easing Curves
Choisir ses courbes d’easing selon la situation
Sept courbes d’accélération courantes, de Linear à Spring, et le type de mouvement auquel chacune convient.
Le rythme d’une animation se décrit par une courbe de vitesse : plus la courbe est raide, plus la vitesse change brusquement, et plus le mouvement paraît rapide. Si l’ouverture d’un menu, la fermeture d’une boîte de dialogue et le glissement d’un indicateur utilisent tous le ease par défaut, l’utilisateur ne distingue pas si un élément apparaît, disparaît ou change de place. Voici les courbes courantes :
- Linear : pour les barres de progression, les chargements et tout ce qui doit seulement donner l’impression de « tourner ». Vitesse constante, départ et arrivée secs,
linear. - Ease-out et Strong ease-out : pour l’entrée des surcouches et éléments modaux, comme un Toast, un menu, une boîte de dialogue ou un tiroir, Ease-out, rapide puis lent,
cubic-bezier(0, 0, .58, 1). Pour les petits éléments qui se mettent en place dès le clic, comme une icône, un texte ou une pilule sélectionnée, Strong ease-out, qui démarre plus vite et finit plus longuement,cubic-bezier(.22, 1, .36, 1): c’est la réponse la plus directe. - Ease-in : pour la sortie des éléments, comme la fermeture d’une boîte de dialogue ou la disparition d’un Toast. Lent puis rapide, l’élément part franchement,
cubic-bezier(.42, 0, 1, 1). À ne pas utiliser pour une entrée : le départ lent donne l’impression d’une interface qui réagit mal. - Ease-in-out : pour les éléments qui changent de place dans l’interface, comme l’indicateur qui glisse sous les onglets, le passage d’une diapositive dans un carrousel ou le défilement fluide vers une section. Lent aux deux bouts et plus rapide au milieu,
cubic-bezier(.42, 0, .58, 1). - Overshoot : pour les petites confirmations ludiques, comme cocher une case, aimer un contenu ou faire apparaître un badge. Dépasse l’arrivée d’environ 10 % puis revient,
cubic-bezier(.34, 1.56, .64, 1). Pas sur les grands panneaux, sinon tout un bloc d’interface tremble. - Spring : pour le retour en place après relâchement, comme le rebond d’un tiroir, le tirer pour actualiser ou la mise en place après un tri par glisser-déposer. Une fois arrivé, l’élément oscille une ou deux fois avant de s’arrêter, ce qui rappelle davantage un objet réel qu’Overshoot ; au relâchement, l’élément a déjà une vitesse, et le ressort peut la prolonger.
Par ailleurs, en définissant ces courbes comme tokens d’animation et en les utilisant selon leur rôle, tout le produit garde un rythme cohérent.
Le prompt associé liste d’abord toutes les transitions et animations du projet, signale celles qui utilisent encore le ease par défaut ou un ease-in pour une entrée, avec la courbe à mettre à chaque endroit ; il ajoute ensuite des tokens d’animation et ajuste courbes et durées une par une.
Give the motion in my product the right easing curves, so things arrive, leave and move the way they should feel. Work inside my existing code and design system: keep what each animation does, how far it goes and what triggers it. Change how it moves over time, and its duration where that is off. 0. Start from what exists - Find every transition and animation: CSS transitions and keyframes, animation libraries (Framer Motion, GSAP, the Web Animations API) and hand-written requestAnimationFrame loops. List each with its component, its trigger, its duration and its curve. - Flag the ones left on the CSS default `ease`, `linear` on something that moves, and `ease-in` on something that appears. 1. The curves as tokens Define them once, next to the other motion tokens, and use only these: - --ease-out: cubic-bezier(0, 0, .58, 1). Anything that enters: toasts, menus, popovers, dialogs, drawers. - --ease-out-strong: cubic-bezier(.22, 1, .36, 1). Small parts settling in right after a click: an icon, a label, a selected pill. It feels the most responsive. - --ease-in: cubic-bezier(.42, 0, 1, 1). Anything that leaves, and only that: a toast timing out, a dialog or drawer closing, a menu collapsing, a list item swiped away. It starts slow and leaves at full speed, so on an entrance it feels late and then stops with a bump. - --ease-in-out: cubic-bezier(.42, 0, .58, 1). Something that stays on screen and only changes place or size: the indicator under tabs or a segmented control, a carousel turning a page, items making room during a reorder, a sidebar resizing, smooth-scrolling to an anchor. Not for coming in: its slow start reads as lag. - --ease-overshoot: cubic-bezier(.34, 1.56, .64, 1). Runs about 10% past its place and comes back. Small, playful confirmations: a checkbox tick, a like, a badge count popping in, a switch knob settling. Never on a dialog, a drawer or anything larger than about 64px, and not on actions people repeat all day. - --ease-spring: linear(0, .32, .78, 1.04, 1.09, 1.06, 1.02, 1, .99, .99, 1). Things let go after a drag or a swipe, so they settle like an object: a bottom sheet snapping open or back, a card returning after a half swipe, pull-to-refresh springing back, a reordered item dropping into place. Prefer the animation library's own spring fed with the release velocity; use this token only where there is none, and fall back to --ease-out-strong where linear() is not supported. - linear: only for things that run rather than move: spinners, progress bars, marquees. - The CSS default `ease` is not a choice. Replace it wherever a curve was left unset. 2. Durations - Small UI (toasts, tooltips, menus, checks): 150-250ms in, 120-200ms out. Exits are shorter than entrances. - Medium (dialogs, popovers with content, drawers): 250-350ms. - Large or full-screen (sheets, page transitions): 350-500ms. Longer feels slow. - Springs and overshoots: about 1.5x the plain duration, since the settle takes time. - Keep the durations as tokens beside the curves (--duration-sm, -md, -lg). 3. Apply them by role - Entrances: ease-out, coming from where the thing belongs (a toast from the top edge, a menu from its trigger), over a short distance (8-24px), growing from 96% and fading in a little sooner than it moves. A light blur (about 8px) that clears as it lands is a nice touch on toasts. - Exits: ease-in, the same path reversed, and shorter. - Moves on screen: ease-in-out. - Parts inside something that has just appeared (its icon, its text, a count) may follow 100-200ms later on the strong ease-out, so it lands in steps rather than all at once. - Gestures: while the pointer or finger moves, follow it 1:1 with no easing. On release, finish on the spring, from the release velocity if the library allows. - Hover and press: 100-150ms ease-out. Never animate layout on hover. - Animate transform and opacity (filter sparingly), not top, left, width or height, which lay out and repaint every frame. 4. Keep it consistent and accessible - One curve per role across the product. Don't tune each component by hand. - Respect prefers-reduced-motion: keep the opacity changes, drop movement and scale, and turn springs and overshoots into a plain 150ms fade. - Never make a user wait on an animation: nothing blocks input, and a new action interrupts the old animation from where it is. 5. Deliver - First list every animation you found, its current curve and duration, and the role and curve you will give it. - Then add the tokens, switch each animation over, and list every file you touched. - Don't change what animates, how far it goes or what triggers it. If an animation has no clear role, ask me first.





















