Vibe Design Tips

ASCII与像素抖色效果

003 ASCII and Dither

ASCII与像素抖色效果

视觉效果

为登录页、官网或卡片里的图片和视频加上 ASCII 与 Dither 效果,效果强弱可以随时调节。

ASCII 和 Dither 按亮度把图片重新画成字符或像素纹理,保留明暗结构,去掉照片的细节;参数都可以调,同一张图既能做主视觉,也能退到背景里当纹理。要点有以下五条:

  1. ASCII:适合终端、代码一类的质感,比如开发者工具的登录页。把画面切成网格,每格按亮度换成一个字符,从「.」到「@」越来越密;大小是字号,间距是格子疏密,采样强度是明暗对比。
  2. Dither:适合印刷网点或像素颗粒的质感。把画面切成像素块,用 4×4 的 Bayer 矩阵当阈值,把每种颜色压成几级,远看混成中间的灰度;大小是像素块,间距是纹理的尺度,采样强度越高,颜色级数越少,颗粒感越重。
  3. 遮罩:两种效果都适用。在画面上叠一层竖向渐变,让画面退后,效果更像纹理而不是噪点;效果干扰到上层文字时,先调高遮罩。
  4. 取样区域:只用于 ASCII,决定字符画在暗部还是亮部,按画面主体所在的明暗选择。城市夜景的主体是灯光,取样亮部;白底上的深色产品照片,取样暗部。
  5. 色调:可以保留原色,也可以从五组配色中选一组,先把图片的明暗映射到这组颜色上,再生成效果,让不同图片的风格保持一致。

参数

ASCII
遮罩 90;取样暗部;采样强度 100;大小 37;间距 0
Dither
遮罩 88;采样强度 100;大小 15;间距 0

附带的 Prompt 会先确认要处理哪张图片或哪段视频,再为它生成效果,并在旁边加一个可以实时调节的参数面板。

Prompt复制后发给 Claude Code、Cursor 等 Agent 即可
Add an ASCII / ordered-dither effect to one specific image or video in
this project, with a live control panel next to it. Use the asset and the
place I name (an <img>, a <video>, or a file path or URL, and the page or
section it sits in); ask me if I have not named them. Apply the effect to
that asset only, in place: keep its size, position, rounded corners and
anything layered on top of it. If the project already has an image or
canvas effect pipeline, or slider, segmented-control and panel components,
build on them; otherwise create a reusable EffectLayer and EffectPanel.

Settings, one object shared by the layer and the panel:
{ filter: 'ascii' | 'dither', mask, palette, inkTone, strength, size,
  spacing }
Keep separate values per filter, so switching filters brings back that
filter's own settings.

What each control does in each filter, its range, and the recommended
value (ASCII / Dither):
- Mask effect, 0-100 (90 / 88): a vertical veil over the picture so the
  effect reads as texture rather than noise. Same in both filters.
- Color, Original or one of five palettes (Original): gradient-maps the
  asset's luminance into one color family before filtering.
- Sample tones, Shadows | Highlights (Shadows; ASCII only, hidden for
  Dither): which end of the tonal range becomes dense characters.
- Sampling strength, 0-100 (100 / 100). ASCII: contrast of the tone curve
  and how bright and opaque the characters are. Dither: how few levels
  each color channel keeps (8 at 0, 2 at 100) and how fully the quantized
  color replaces the original.
- Size, 0-100 (37 / 15). ASCII: font size, 7-24px. Dither: pixel block,
  2-9px.
- Spacing, 0-100 (0 / 0). ASCII: grid step, 8-24px across and 9-26px
  down, never tighter than the glyphs. Dither: scale of the Bayer
  pattern, 1-4 blocks per matrix cell.

Helpers used throughout:
- range(v, a, b) = a + (b - a) * v / 100
- luminance L = (0.299 R + 0.587 G + 0.114 B) / 255
- s = strength / 100
- "The box" is the asset's rendered size on the page.

Sampling:
- Cover-fit the asset into the box and draw it into a small sampling
  canvas (about 480px on the long side), then read it with getImageData.
  A sample is the pixel under a point in the box, composited over white.
- With a palette, recolor that canvas first: map each pixel's L through a
  256-entry lookup built from the palette's four stops.
- Per image or video frame, take about 12,000 evenly spaced samples:
  low = 8th percentile of L, high = 92nd percentile.
- Shadows means dark ink, Highlights light ink.

ASCII:
- Characters, from empty to full: "  .,:;-=+xX08S#&@" (starts with two
  spaces).
- Font: round(range(size, 7, 24))px monospace (22 instead of 24 when the
  box is under 720px wide), centered in each cell.
- Grid: x step = max(range(spacing, 8, 24), widest glyph * 1.08); line
  height = max(range(spacing, 9, 26), height of "@" * 1.12, font * 1.04).
  The first cell sits half a step in from the edge.
- Tone of a cell: raw = dark ink ? 1 - L : L; normalized = dark ink ?
  (high - L) / (high - low) : (L - low) / (high - low), clamped 0-1 (use
  raw alone when high - low < 0.025); mix = 0.72 + 0.14 s;
  t = raw (1 - mix) + normalized mix. Then a tone curve: black = 0.22 s,
  white = 1 - 0.08 s, lev = clamp((t - black) / (white - black), 0, 1),
  tone = lev (1 - s) + smoothstep(lev) s.
- Skip cells with tone <= 0.02. Character = chars[round(tone * 16)]; skip
  spaces.
- Ink: the sampled color lifted in HSV: value += (1 - value) *
  (0.24 + 0.18 s + 0.24 tone); saturation *= 1 + 0.16 + 0.2 s (clamped).
  Alpha = clamp((0.12 + 0.7 tone) (0.72 + 0.28 s), 0.06, 0.94).

Dither (ordered, Bayer 4x4):
- pixel size = max(2, round(range(size, 2, 9))) (7 instead of 9 under
  720px); pattern scale = max(1, round(range(spacing, 1, 4))); levels =
  max(2, round(range(strength, 8, 2))) per channel; blend =
  range(strength, 0.32, 1).
- Matrix [[0,8,2,10],[12,4,14,6],[3,11,1,9],[15,7,13,5]]; threshold =
  (m + 0.5) / 16, indexed by floor(x / pattern scale), floor(y / pattern
  scale).
- For each block sample its center, push saturation away from luma by
  1 + 0.06 + 0.18 s, then per channel: scaled = c / 255 * (levels - 1);
  q = floor(scaled) + (fraction > threshold ? 1 : 0);
  out = c + (q / (levels - 1) * 255 - c) * blend.
- Write the blocks into a canvas of box / pixel size and draw it scaled up
  with image smoothing off.

Mask and layering:
- The mask is a vertical gradient with stops at the top, 42% and the
  bottom. Base opacities: on a light page white 54/20/38%, on a dark page
  black 44/20/50%. For a mask value v: stop = v <= 50 ? base *
  (v / 50)^1.08 : base + (100 - base) * ((v - 50) / 50)^1.08.
- ASCII: draw the (recolored) picture, the mask, then the characters.
  Dither: draw the dithered picture, then the mask on top.
- Changing filter or palette cross-fades from the last frame over 150ms.

Palettes (four stops at 0, 0.4, 0.74, 1):
- meadow: #2B361F, #677D45, #AEBA78, #E5E1BD
- blue: #192A4D, #326AC5, #A2C2F1, #EDF3FC
- amber: #3C200F, #A74C15, #EF9A46, #F7E7CA
- lavender: #292144, #6552AB, #B3A5E4, #F0ECFB
- mono: #151515, #575757, #A6A6A6, #ECECEC

Rendering:
- Draw into a canvas laid over the asset with the same size and corner
  radius, at devicePixelRatio capped at 1.6x and about 2048 x 2048.
- Image: redraw when a setting changes (debounced 72ms).
- Video: redraw on every new frame (requestVideoFrameCallback, falling
  back to requestAnimationFrame) while it plays and is on screen; keep
  the video element underneath as the source.

Control panel:
- Place it next to the asset, below it when there is room, otherwise
  beside it, never covering it. About 420px wide, centered on the asset.
- Rows, in order: Mask effect, Filter (two tabs: ASCII | Dither), Color
  (round swatches), Sample tones (ASCII only), Sampling strength, Size,
  Spacing (shown with %).
- Each row 46px tall: a 136px label column, then the control. Slider: a
  22px track with 8px radius and a filled part, a 9x30 rounded-rectangle
  thumb (3px radius), a number box with the value centered, and a snap
  mark at 50. Swatches: 22px circles, each filled with its palette's two
  middle stops at 135deg (Original: a tiny crop of the asset); the
  selected one gets a ring with a small gap.
- Every change applies live while dragging. Add a "Reset to recommended"
  action that restores the values above for the current filter.
- Follow the page's light or dark theme and the project's tokens.