{"summary":"七種常用的動畫速度曲線，從 Linear 到 Spring，分別適合什麼樣的動作。","notes":"<p>動畫的節奏用速度曲線描述：曲線越陡，速度變化越劇烈，看起來就越快。選單彈出、對話框關閉、指示條滑動如果都用預設的 <code>ease</code>，使用者分不清元素是在出現、消失還是換位置。常用的曲線有以下幾種：</p>\n        <ol>\n        <li><strong>Linear</strong>：用於進度條、載入這類看起來只是「在跑」的東西。等速運動，起止都很生硬，<code>linear</code>。</li>\n        <li><strong>Ease-out 與 Strong ease-out</strong>：浮層和模態元素的進場，例如 Toast、選單、對話框、抽屜，用先快後慢的 Ease-out，<code>cubic-bezier(0, 0, .58, 1)</code>。點擊後馬上就定位的小元素，例如圖示、文字、選中的膠囊，用起步更快、收尾更長的 Strong ease-out，<code>cubic-bezier(.22, 1, .36, 1)</code>，回應最直接。</li>\n        <li><strong>Ease-in</strong>：用於元素離場，例如對話框關閉、Toast 消失。先慢後快，乾脆地離開，<code>cubic-bezier(.42, 0, 1, 1)</code>。不要用在進場上，起步慢，看起來像介面反應遲鈍。</li>\n        <li><strong>Ease-in-out</strong>：用於在介面內換位置的元素，例如分頁標籤下滑動的指示條、輪播翻頁、目錄平滑捲動。兩端慢、中間最快，<code>cubic-bezier(.42, 0, .58, 1)</code>。</li>\n        <li><strong>Overshoot</strong>：用於小而俏皮的確認，例如勾選、按讚、徽章彈出。衝過終點約 10% 再退回，<code>cubic-bezier(.34, 1.56, .64, 1)</code>。不要用在大面板上，否則整塊介面都會晃動。</li>\n        <li><strong>Spring</strong>：用於放開後的歸位，例如抽屜回彈、下拉重新整理、拖曳排序後的定位。到位後輕晃一兩下再停穩，比 Overshoot 更像真實物體；使用者放開時元素已經帶有速度，彈簧能接著這個速度運動。</li>\n        </ol>\n        <p>另外，把這些曲線定義為動態 token，依角色使用，整個產品的節奏就能保持一致。</p>\n        <p>附帶的提示詞會先列出專案中所有的轉場和動畫，標出仍用預設 ease 或進場用了 ease-in 的地方，以及每處要換成的曲線；再加上動態 token，逐一調整曲線和時長。</p>","prompt":"Give the motion in my product the right easing curves, so things arrive, leave and move the way they should feel. Work inside my existing code and design system: keep what each animation does, how far it goes and what triggers it. Change how it moves over time, and its duration where that is off.\n\n0. Start from what exists\n- Find every transition and animation: CSS transitions and keyframes, animation libraries (Framer Motion, GSAP, the Web Animations API) and hand-written requestAnimationFrame loops. List each with its component, its trigger, its duration and its curve.\n- Flag the ones left on the CSS default `ease`, `linear` on something that moves, and `ease-in` on something that appears.\n\n1. The curves as tokens\nDefine them once, next to the other motion tokens, and use only these:\n- --ease-out: cubic-bezier(0, 0, .58, 1). Anything that enters: toasts, menus, popovers, dialogs, drawers.\n- --ease-out-strong: cubic-bezier(.22, 1, .36, 1). Small parts settling in right after a click: an icon, a label, a selected pill. It feels the most responsive.\n- --ease-in: cubic-bezier(.42, 0, 1, 1). Anything that leaves, and only that: a toast timing out, a dialog or drawer closing, a menu collapsing, a list item swiped away. It starts slow and leaves at full speed, so on an entrance it feels late and then stops with a bump.\n- --ease-in-out: cubic-bezier(.42, 0, .58, 1). Something that stays on screen and only changes place or size: the indicator under tabs or a segmented control, a carousel turning a page, items making room during a reorder, a sidebar resizing, smooth-scrolling to an anchor. Not for coming in: its slow start reads as lag.\n- --ease-overshoot: cubic-bezier(.34, 1.56, .64, 1). Runs about 10% past its place and comes back. Small, playful confirmations: a checkbox tick, a like, a badge count popping in, a switch knob settling. Never on a dialog, a drawer or anything larger than about 64px, and not on actions people repeat all day.\n- --ease-spring: linear(0, .32, .78, 1.04, 1.09, 1.06, 1.02, 1, .99, .99, 1). Things let go after a drag or a swipe, so they settle like an object: a bottom sheet snapping open or back, a card returning after a half swipe, pull-to-refresh springing back, a reordered item dropping into place. Prefer the animation library's own spring fed with the release velocity; use this token only where there is none, and fall back to --ease-out-strong where linear() is not supported.\n- linear: only for things that run rather than move: spinners, progress bars, marquees.\n- The CSS default `ease` is not a choice. Replace it wherever a curve was left unset.\n\n2. Durations\n- Small UI (toasts, tooltips, menus, checks): 150-250ms in, 120-200ms out. Exits are shorter than entrances.\n- Medium (dialogs, popovers with content, drawers): 250-350ms.\n- Large or full-screen (sheets, page transitions): 350-500ms. Longer feels slow.\n- Springs and overshoots: about 1.5x the plain duration, since the settle takes time.\n- Keep the durations as tokens beside the curves (--duration-sm, -md, -lg).\n\n3. Apply them by role\n- Entrances: ease-out, coming from where the thing belongs (a toast from the top edge, a menu from its trigger), over a short distance (8-24px), growing from 96% and fading in a little sooner than it moves. A light blur (about 8px) that clears as it lands is a nice touch on toasts.\n- Exits: ease-in, the same path reversed, and shorter.\n- Moves on screen: ease-in-out.\n- Parts inside something that has just appeared (its icon, its text, a count) may follow 100-200ms later on the strong ease-out, so it lands in steps rather than all at once.\n- Gestures: while the pointer or finger moves, follow it 1:1 with no easing. On release, finish on the spring, from the release velocity if the library allows.\n- Hover and press: 100-150ms ease-out. Never animate layout on hover.\n- Animate transform and opacity (filter sparingly), not top, left, width or height, which lay out and repaint every frame.\n\n4. Keep it consistent and accessible\n- One curve per role across the product. Don't tune each component by hand.\n- Respect prefers-reduced-motion: keep the opacity changes, drop movement and scale, and turn springs and overshoots into a plain 150ms fade.\n- Never make a user wait on an animation: nothing blocks input, and a new action interrupts the old animation from where it is.\n\n5. Deliver\n- First list every animation you found, its current curve and duration, and the role and curve you will give it.\n- Then add the tokens, switch each animation over, and list every file you touched.\n- Don't change what animates, how far it goes or what triggers it. If an animation has no clear role, ask me first.","skill":"/skills/kubai-easing-curves/SKILL.md","skillText":"# 按场景选择缓动曲线\n\n《999 个小技巧，让你 Vibe 的产品更有质感》第 011 期 · @kubai087\n\n在用户的项目里按下面的要求改造。要求以用户的口吻写成：文中的 I、me、my 指用户；写着要先问的地方，先停下来问用户再继续。\n\n## 改造要求\n\nGive the motion in my product the right easing curves, so things arrive, leave and move the way they should feel. Work inside my existing code and design system: keep what each animation does, how far it goes and what triggers it. Change how it moves over time, and its duration where that is off.\n\n0. Start from what exists\n- Find every transition and animation: CSS transitions and keyframes, animation libraries (Framer Motion, GSAP, the Web Animations API) and hand-written requestAnimationFrame loops. List each with its component, its trigger, its duration and its curve.\n- Flag the ones left on the CSS default `ease`, `linear` on something that moves, and `ease-in` on something that appears.\n\n1. The curves as tokens\nDefine them once, next to the other motion tokens, and use only these:\n- --ease-out: cubic-bezier(0, 0, .58, 1). Anything that enters: toasts, menus, popovers, dialogs, drawers.\n- --ease-out-strong: cubic-bezier(.22, 1, .36, 1). Small parts settling in right after a click: an icon, a label, a selected pill. It feels the most responsive.\n- --ease-in: cubic-bezier(.42, 0, 1, 1). Anything that leaves, and only that: a toast timing out, a dialog or drawer closing, a menu collapsing, a list item swiped away. It starts slow and leaves at full speed, so on an entrance it feels late and then stops with a bump.\n- --ease-in-out: cubic-bezier(.42, 0, .58, 1). Something that stays on screen and only changes place or size: the indicator under tabs or a segmented control, a carousel turning a page, items making room during a reorder, a sidebar resizing, smooth-scrolling to an anchor. Not for coming in: its slow start reads as lag.\n- --ease-overshoot: cubic-bezier(.34, 1.56, .64, 1). Runs about 10% past its place and comes back. Small, playful confirmations: a checkbox tick, a like, a badge count popping in, a switch knob settling. Never on a dialog, a drawer or anything larger than about 64px, and not on actions people repeat all day.\n- --ease-spring: linear(0, .32, .78, 1.04, 1.09, 1.06, 1.02, 1, .99, .99, 1). Things let go after a drag or a swipe, so they settle like an object: a bottom sheet snapping open or back, a card returning after a half swipe, pull-to-refresh springing back, a reordered item dropping into place. Prefer the animation library's own spring fed with the release velocity; use this token only where there is none, and fall back to --ease-out-strong where linear() is not supported.\n- linear: only for things that run rather than move: spinners, progress bars, marquees.\n- The CSS default `ease` is not a choice. Replace it wherever a curve was left unset.\n\n2. Durations\n- Small UI (toasts, tooltips, menus, checks): 150-250ms in, 120-200ms out. Exits are shorter than entrances.\n- Medium (dialogs, popovers with content, drawers): 250-350ms.\n- Large or full-screen (sheets, page transitions): 350-500ms. Longer feels slow.\n- Springs and overshoots: about 1.5x the plain duration, since the settle takes time.\n- Keep the durations as tokens beside the curves (--duration-sm, -md, -lg).\n\n3. Apply them by role\n- Entrances: ease-out, coming from where the thing belongs (a toast from the top edge, a menu from its trigger), over a short distance (8-24px), growing from 96% and fading in a little sooner than it moves. A light blur (about 8px) that clears as it lands is a nice touch on toasts.\n- Exits: ease-in, the same path reversed, and shorter.\n- Moves on screen: ease-in-out.\n- Parts inside something that has just appeared (its icon, its text, a count) may follow 100-200ms later on the strong ease-out, so it lands in steps rather than all at once.\n- Gestures: while the pointer or finger moves, follow it 1:1 with no easing. On release, finish on the spring, from the release velocity if the library allows.\n- Hover and press: 100-150ms ease-out. Never animate layout on hover.\n- Animate transform and opacity (filter sparingly), not top, left, width or height, which lay out and repaint every frame.\n\n4. Keep it consistent and accessible\n- One curve per role across the product. Don't tune each component by hand.\n- Respect prefers-reduced-motion: keep the opacity changes, drop movement and scale, and turn springs and overshoots into a plain 150ms fade.\n- Never make a user wait on an animation: nothing blocks input, and a new action interrupts the old animation from where it is.\n\n5. Deliver\n- First list every animation you found, its current curve and duration, and the role and curve you will give it.\n- Then add the tokens, switch each animation over, and list every file you touched.\n- Don't change what animates, how far it goes or what triggers it. If an animation has no clear role, ask me first.\n"}