{"summary":"Sıvı cam malzemesinin altı katmanı ve renk tonu ile metin renginin arka plana göre ayarlanması; görsel ya da video üzerindeki kartlar ve oynatıcılar için.","notes":"<p>Sıradan buzlu cam yalnızca yarı saydam bir arka plan ve bulanıklıktan oluşur; arka plan karmaşık olduğunda metin zor okunur, koyu zeminlerde de grileşir. Sıvı cam kenar kırılması ve arka plana göre değişen bir renk tonu ekler; kalınlığı varmış gibi görünür ve metin her zaman net kalır. Bu malzeme Lumno geliştirilirken araştırıldı ve aşağıdan yukarıya şu altı katmandan oluşur:</p>\n        <ol>\n        <li><strong>Gölge</strong>: kartın hacmini gösterir.</li>\n        <li><strong>Bulanıklık ve parlatma</strong>: arka planı bulanıklaştırır, aynı zamanda doygunluğunu ve parlaklığını artırır; cam daha berrak görünür. Açık camda doygunluk %180, parlaklık 1.06; koyu camda doygunluk %160, parlaklık 0.8.</li>\n        <li><strong>Kenar kırılması</strong>: bir SVG yer değiştirme haritası kenar çevresindeki şeritte arka planı içe doğru kaydırır; kenara yaklaştıkça kayma artar, orta kısım düz kalır. Kırmızı ışık maviden biraz daha fazla kırılır ve renk ayrışması oluşur. Kenar genişliği 44px, renk ayrışması ±%15.</li>\n        <li><strong>Renk tonu</strong>: yarı saydam bir renk katmanıdır; opaklığı arka planın karmaşıklığına göre otomatik ayarlanır. Arka plan ne kadar karmaşıksa ton o kadar yoğun olur ve metin o kadar kolay okunur. Açık camda beyaz %6–%22, koyu camda %16–%38.</li>\n        <li><strong>Kenar ışığı</strong>: sol üstte ve sağ altta birer çizgi, biraz içeride de bir çizgi daha; bütün daha kalın görünür.</li>\n        <li><strong>Metin rengi</strong>: açık camda multiply, koyu camda plus-lighter karışım modu kullanılır; metin arka planın renginden biraz taşır.</li>\n        </ol>\n        <p>Ayrıca malzeme arka plandaki birkaç örnek noktayı okuyup ortalama parlaklığı hesaplar; değer 0.5’in altındaysa otomatik olarak açık renge geçer. Sıvı cam kapaklar, videolar ve duvar kâğıtları gibi açıklığı ya da rengi çok değişen görüntülerin üzerine uygundur; düz renkli bir arka planda sıradan yarı saydam bir renk bloğundan neredeyse farkı yoktur. Metni kontrol ederken arka planın hem en parlak hem en koyu yerlerine bakın.</p>\n        <h2>Parametreler</h2>\n        <dl class=\"params\">\n        <dt>Açık</dt><dd>Renk tonu beyaz %6–%22; bulanıklık 2px; doygunluk %180; parlaklık 1.06</dd>\n        <dt>Koyu</dt><dd>Renk tonu rgb(20 20 24) %16–%38; bulanıklık 2px; doygunluk %160; parlaklık 0.8</dd>\n        <dt>Kırılma</dt><dd>Kenar genişliği 44px; kenardaki kayma 1.1 × kenar genişliği; renk ayrımı ±%15</dd>\n        </dl>\n        <p>Yazar bu malzemeyi açık kaynaklı bir araç olarak yayımladı: <a href=\"https://www.kubai.design/glasswork/\">Glasswork</a>. Renk tonu, bulanıklık, kenar kırılması, kenar ışığı ve yazı rengi bir panelden tek tek ayarlanıp farklı duvar kâğıtları, fotoğraflar ve videolar üzerinde denenebilir; sonuç doğrudan CSS olarak kopyalanabilir.</p>\n        <p>Ekteki Prompt önce üründe görsel, video ya da karmaşık arka planlar üzerinde duran kartları, oynatıcıları ve arama kutularını listeler, hangilerinin cama dönüşeceğini, hangilerinin aynı kalacağını açıklar; ardından malzemeyi renk token’larına yazar, açık ve koyu mod için ayrı ton yoğunlukları belirler, düzen değişmez.</p>","prompt":"Give the cards and panels in my product a liquid glass material: clear glass that takes its color from the scene behind it, reads as a thick slab at the rim, adapts to what is behind it, and keeps its text readable in light and dark mode. Work inside my existing design system. This is a change of surface, not of layout: keep my markup, spacing, radii, fonts, icons and copy.\n\n0. Start from what exists\n- Find every surface that sits over an image, a wallpaper, video or a busy background: cards, players, search bars, toolbars, menus, popovers, toasts. List them with their component and where they are.\n- Find how the product switches between light and dark mode, and where its color tokens live. The glass goes into those tokens, not into each component.\n- Leave surfaces over a plain background alone; glass over a flat color only looks gray.\n\n1. The material as tokens\nBuild it as one set of variables per state, so a surface opts in by using them. The numbers are a starting point, for a UI at its normal size.\n- Light glass, dark text (the default): tint white at 6–22% (by density, step 4); backdrop filter blur(2px) saturate(180%) brightness(1.06), so the color comes from behind and stays vivid instead of milky.\n  Edge: inset 1.5px 1.5px 1px -1px white 95%, inset -1.5px -1.5px 1px -1px white 55%, inset 0 0 0 0.5px white 30%, 0 0 0 0.5px black 6%, 0 6px 24px black 8%.\n  Inner light, on a layer inside the surface: a radial highlight from the top left (white 30% fading out by 55%), and soft inset glows just inside the rim, brighter at the top and left, a little shade at the bottom.\n- Light mode over a dark area, light text: tint rgb(16 18 22) at 10–30%; filter blur(2px) saturate(170%), then brightness(0.85); edge: a faint inset white line on top and a 0.5px dark outline.\n- Dark mode: tint rgb(20 20 24) at 16–38%; filter blur(2px) saturate(160%) brightness(0.8), which dims like a multiply with black instead of going muddy; the same edge and inner light at about a third of their strength, with a darker outline and shadow.\n- Ink, one color in fixed steps, used for everything drawn on the glass:\n  on light glass black 86% (titles, icons, times, progress), rgb(60 60 67) at 70% (secondary); mix-blend-mode multiply;\n  on dark glass white 94%, rgb(235 235 245) at 64%; mix-blend-mode plus-lighter.\n  Draw icons in the opaque color and fade the whole icon with opacity: a translucent color darkens where a shape's strokes and fills overlap.\n- A highlighted row on light glass is a lighter layer of the glass: white 42% on hover, 76% when selected, with a white stroke. Never a gray wash.\n- Register the numeric and color tokens with @property so a surface glides between states instead of jumping.\n\n2. Apply it in four declarations\nEach surface changes only these, and its markup stays as it is:\n- background: the tint.\n- backdrop-filter: the material's filter, then the rim lens (step 3) last, so the color steps fold into one pass and the bend stays crisp.\n- box-shadow: the edge.\n- color: the ink, with the blend mode on everything drawn inside.\nHover brightens the tint by about 14% instead of lifting a shadow.\n\n3. The rim lens\n- Build a displacement map for each surface: red is the sideways bend, green the vertical one, 128 is none. Only a rim bends; the middle stays flat.\n- The rim is about 44px wide on a card (min(44px, the short side / 3.5), never under 4px). For a thick slab, a point d from the edge looks inward by 1.1 × rim × (1 - d / rim)^2.6: hard at the edge, where the scene folds back on itself, easing to nothing at the rim's inner edge.\n- Draw the map for the same corner the CSS draws. If the surface uses corner-shape: superellipse(), follow that curve, not a circle, or the bend and the rim light miss each other at the corners.\n- Put it in an SVG filter with feImage (the map) and feDisplacementMap (scale = 2 × the largest offset), and add url(#id) at the end of backdrop-filter.\n- Split it into colors: three passes, red 15% further and blue 15% less, each kept to its channel with feColorMatrix and added back with screen blends. Check the corners of wide rims over busy backgrounds; lower the split where it turns into a haze.\n- Only Chromium draws url() in backdrop-filter. Check CSS.supports('backdrop-filter', 'url(#a)') and skip Firefox, which parses it and draws nothing. Everywhere else the CSS-only glass stays.\n- Wait for the map image to decode before pointing a surface at the filter, or it draws without its blur. Give every filter a unique id and its own <svg>. Build maps once per radius and rim width and reuse them; on resize, move the map, don't rebuild it.\n- Skip the lens on surfaces under 32px, and on surfaces with will-change or their own compositing layer (menus, animated panels), where Chrome can draw the map instead of the bent backdrop.\n\n4. Adapt to what is behind\n- For each surface, sample the background under it at a 5 × 3 grid, drop the two darkest and two brightest points, and average. Luminance is (0.299 R + 0.587 G + 0.114 B) / 255; texture is the brightest point minus the darkest.\n- Ink: in light mode, light text when the luminance is under 0.5. Keep the current ink within ±0.05 of the line so a surface never flickers at it. Dark mode is always light text. Neighbouring surfaces in one row share one decision.\n- Density (0 thin, 1 dense) = 0.55 × how close the background is to the ink's own brightness + 0.7 × texture + 0.3 × chroma. It moves the tint between its thin and dense alpha.\n- Saturation kept = 1 - 0.75 × chroma, at least 0.45, so a vivid background doesn't stain the glass.\n- Sample again when the background, the theme or a surface's position changes, and remember the last ink so the next load opens in it.\n- If the background is not an image you can read (live video, cross-origin content), pick the ink from the theme and use the dense tint.\n\n5. Let people set the tint\n- Add one setting for light mode and one for dark that scale the tint, from 0 to 1.5 (1 is the material as designed). Below 1 the brightness lift in the filter thins with it, so at 0 only the blur, the rim and the shadow are left.\n- Each theme keeps its own value; switching themes glides to that theme's value.\n\n6. Keep it accessible\n- Check text contrast on the busiest and the darkest background the product allows, at the default tint; raise density, not the ink's opacity, until it passes.\n- Respect prefers-reduced-transparency and forced colors: fall back to a solid surface in the same tint at full opacity.\n- Keep focus rings, disabled states and error colors as they are; failures keep their red.\n\n7. Deliver\n- First list the surfaces you will change, which get the lens and the color split, and which you leave solid and why.\n- Then add the tokens, the lens helper and the two settings, switch the surfaces over, and list every file you touched.\n- Don't change layout, fonts, radii or copy. If a surface would need a new component to work as glass, stop and ask me first.","skill":"/skills/kubai-liquid-glass/SKILL.md","skillText":"# 液态玻璃材质\n\n《999 个小技巧，让你 Vibe 的产品更有质感》第 010 期 · @kubai087\n\n在用户的项目里按下面的要求改造。要求以用户的口吻写成：文中的 I、me、my 指用户；写着要先问的地方，先停下来问用户再继续。\n\n## 改造要求\n\nGive the cards and panels in my product a liquid glass material: clear glass that takes its color from the scene behind it, reads as a thick slab at the rim, adapts to what is behind it, and keeps its text readable in light and dark mode. Work inside my existing design system. This is a change of surface, not of layout: keep my markup, spacing, radii, fonts, icons and copy.\n\n0. Start from what exists\n- Find every surface that sits over an image, a wallpaper, video or a busy background: cards, players, search bars, toolbars, menus, popovers, toasts. List them with their component and where they are.\n- Find how the product switches between light and dark mode, and where its color tokens live. The glass goes into those tokens, not into each component.\n- Leave surfaces over a plain background alone; glass over a flat color only looks gray.\n\n1. The material as tokens\nBuild it as one set of variables per state, so a surface opts in by using them. The numbers are a starting point, for a UI at its normal size.\n- Light glass, dark text (the default): tint white at 6–22% (by density, step 4); backdrop filter blur(2px) saturate(180%) brightness(1.06), so the color comes from behind and stays vivid instead of milky.\n  Edge: inset 1.5px 1.5px 1px -1px white 95%, inset -1.5px -1.5px 1px -1px white 55%, inset 0 0 0 0.5px white 30%, 0 0 0 0.5px black 6%, 0 6px 24px black 8%.\n  Inner light, on a layer inside the surface: a radial highlight from the top left (white 30% fading out by 55%), and soft inset glows just inside the rim, brighter at the top and left, a little shade at the bottom.\n- Light mode over a dark area, light text: tint rgb(16 18 22) at 10–30%; filter blur(2px) saturate(170%), then brightness(0.85); edge: a faint inset white line on top and a 0.5px dark outline.\n- Dark mode: tint rgb(20 20 24) at 16–38%; filter blur(2px) saturate(160%) brightness(0.8), which dims like a multiply with black instead of going muddy; the same edge and inner light at about a third of their strength, with a darker outline and shadow.\n- Ink, one color in fixed steps, used for everything drawn on the glass:\n  on light glass black 86% (titles, icons, times, progress), rgb(60 60 67) at 70% (secondary); mix-blend-mode multiply;\n  on dark glass white 94%, rgb(235 235 245) at 64%; mix-blend-mode plus-lighter.\n  Draw icons in the opaque color and fade the whole icon with opacity: a translucent color darkens where a shape's strokes and fills overlap.\n- A highlighted row on light glass is a lighter layer of the glass: white 42% on hover, 76% when selected, with a white stroke. Never a gray wash.\n- Register the numeric and color tokens with @property so a surface glides between states instead of jumping.\n\n2. Apply it in four declarations\nEach surface changes only these, and its markup stays as it is:\n- background: the tint.\n- backdrop-filter: the material's filter, then the rim lens (step 3) last, so the color steps fold into one pass and the bend stays crisp.\n- box-shadow: the edge.\n- color: the ink, with the blend mode on everything drawn inside.\nHover brightens the tint by about 14% instead of lifting a shadow.\n\n3. The rim lens\n- Build a displacement map for each surface: red is the sideways bend, green the vertical one, 128 is none. Only a rim bends; the middle stays flat.\n- The rim is about 44px wide on a card (min(44px, the short side / 3.5), never under 4px). For a thick slab, a point d from the edge looks inward by 1.1 × rim × (1 - d / rim)^2.6: hard at the edge, where the scene folds back on itself, easing to nothing at the rim's inner edge.\n- Draw the map for the same corner the CSS draws. If the surface uses corner-shape: superellipse(), follow that curve, not a circle, or the bend and the rim light miss each other at the corners.\n- Put it in an SVG filter with feImage (the map) and feDisplacementMap (scale = 2 × the largest offset), and add url(#id) at the end of backdrop-filter.\n- Split it into colors: three passes, red 15% further and blue 15% less, each kept to its channel with feColorMatrix and added back with screen blends. Check the corners of wide rims over busy backgrounds; lower the split where it turns into a haze.\n- Only Chromium draws url() in backdrop-filter. Check CSS.supports('backdrop-filter', 'url(#a)') and skip Firefox, which parses it and draws nothing. Everywhere else the CSS-only glass stays.\n- Wait for the map image to decode before pointing a surface at the filter, or it draws without its blur. Give every filter a unique id and its own <svg>. Build maps once per radius and rim width and reuse them; on resize, move the map, don't rebuild it.\n- Skip the lens on surfaces under 32px, and on surfaces with will-change or their own compositing layer (menus, animated panels), where Chrome can draw the map instead of the bent backdrop.\n\n4. Adapt to what is behind\n- For each surface, sample the background under it at a 5 × 3 grid, drop the two darkest and two brightest points, and average. Luminance is (0.299 R + 0.587 G + 0.114 B) / 255; texture is the brightest point minus the darkest.\n- Ink: in light mode, light text when the luminance is under 0.5. Keep the current ink within ±0.05 of the line so a surface never flickers at it. Dark mode is always light text. Neighbouring surfaces in one row share one decision.\n- Density (0 thin, 1 dense) = 0.55 × how close the background is to the ink's own brightness + 0.7 × texture + 0.3 × chroma. It moves the tint between its thin and dense alpha.\n- Saturation kept = 1 - 0.75 × chroma, at least 0.45, so a vivid background doesn't stain the glass.\n- Sample again when the background, the theme or a surface's position changes, and remember the last ink so the next load opens in it.\n- If the background is not an image you can read (live video, cross-origin content), pick the ink from the theme and use the dense tint.\n\n5. Let people set the tint\n- Add one setting for light mode and one for dark that scale the tint, from 0 to 1.5 (1 is the material as designed). Below 1 the brightness lift in the filter thins with it, so at 0 only the blur, the rim and the shadow are left.\n- Each theme keeps its own value; switching themes glides to that theme's value.\n\n6. Keep it accessible\n- Check text contrast on the busiest and the darkest background the product allows, at the default tint; raise density, not the ink's opacity, until it passes.\n- Respect prefers-reduced-transparency and forced colors: fall back to a solid surface in the same tint at full opacity.\n- Keep focus rings, disabled states and error colors as they are; failures keep their red.\n\n7. Deliver\n- First list the surfaces you will change, which get the lens and the color split, and which you leave solid and why.\n- Then add the tokens, the lens helper and the two settings, switch the surfaces over, and list every file you touched.\n- Don't change layout, fonts, radii or copy. If a surface would need a new component to work as glass, stop and ask me first.\n"}