{"summary":"一组有点击手感的拟物按钮：五个层级、五层材质，以及悬停和按下时的光影变化，适合后台和工具类产品。","notes":"<p>扁平按钮按下时通常只是颜色略微变深，快速点击时几乎看不出来；拟物按钮按下时会下沉，位置、渐变和阴影同时变化，用户能确认这一下按到了。要点有以下五条：</p>\n        <ol>\n        <li><strong>五个层级</strong>：适合按钮多、颜色少的后台、编辑器和设置页，主次只能靠明暗和材质区分。从强到弱为 primary 深石板色按键、secondary 凸起的白色按键、tertiary 浅灰按键、ghost 平时无底色、text 只有文字和细下划线；同一区域只放一个 primary。</li>\n        <li><strong>五层材质</strong>：有底色的三个层级都由同样的五层构成：顶部浅 6–8% 的渐变面，比渐变底部深一级的 1px 描边，顶部一道白色高光，底部一道暗线，以及贴地阴影加柔和投影两层。层级之间只有数值不同，五层定义成一组 token，由各层级分别赋值。</li>\n        <li><strong>悬停与按下</strong>：悬停时按键面亮一级，投影变大。按下时下移 1px，渐变上下翻转，投影收到几乎贴地，顶部高光变成一道内阴影。静止和按下的内阴影层数要相同，不足的用透明阴影补齐，阴影才会平滑过渡。</li>\n        <li><strong>光源与颜色</strong>：光源固定在正上方，高光总在顶部、暗线总在底部，整组按钮看起来在同一个空间里。只用中性灰，不用品牌色，层级靠明暗区分；也不用镜面高光、外发光和大面积模糊。</li>\n        <li><strong>按字号缩放</strong>：高度、内边距、圆角、描边和每层阴影的偏移、模糊，都写成单位 u = 字号 / 14 的倍数。14px 文字时 u = 1px，按钮高 40px；16px 文字时 u ≈ 1.14px，按钮高约 45.7px，阴影按同一比例放大。</li>\n        </ol>\n        <h2>参数</h2>\n        <dl class=\"params\">\n        <dt>尺寸</dt><dd>文字 14px；高 40px；圆角 10px；左右内边距 18px</dd>\n        <dt>按下</dt><dd>下移 1px；投影收为 0 1px 1px</dd>\n        <dt>时长</dt><dd>位移 120ms；阴影 140ms；颜色 160ms</dd>\n        </dl>\n        <p>附带的 Prompt 会优先改造项目里已有的按钮组件，保留原有的接口和无障碍设置；项目里没有按钮组件时，才新建一个。</p>","prompt":"Define a tactile, skeuomorphic Button component with five variants, from\nstrongest to weakest: primary, secondary, tertiary, ghost, text.\nIf the project already has a component library or design system, do not\nadd a new component: restyle its existing Button through its own variant\nand token system, and keep its API, props and accessibility as they are.\nOtherwise create one reusable Button with `variant` and `size` props.\n\nStyle: calm and precise, like the Lumno browser extension and the Cloudflare\ndashboard. Neutral grays only, no brand hues. Lit from straight above.\nNo glossy Web 2.0 shine, no glow, no large blur.\n\nVariants:\n1. primary   - near-black slate face (#404859 -> #273042), white label\n2. secondary - raised white key (#FFFFFF -> #F4F5F7), dark gray label\n3. tertiary  - soft gray key (#F3F4F6 -> #E7E9EC), dark gray label\n4. ghost     - no face at rest; faint gray fill on hover; a recessed well\n               when pressed\n5. text      - gray label with a thin underline and an arrow that nudges\n               right on hover\n\nEvery filled variant is the same five material layers; only the values\nchange, so define them once as tokens and let each variant set its own:\n1. Face: 180deg linear gradient, top 6-8% lighter than bottom.\n2. Edge: 1px solid border one step darker than the bottom of the face\n   (primary #12161F, secondary rgba(15,23,42,.14), tertiary rgba(15,23,42,.1)).\n3. Top highlight: inset 0 1px 0 white (18% on slate, 85-100% on light\n   faces). Put every inset layer in the button's own box-shadow, before the\n   drop layers, never on a pseudo-element overlay: inset shadows on the\n   element follow the inner radius (outer radius minus border), so the\n   corners line up in every state.\n4. Bottom shade: inset 0 -1px 0 black (22% on slate, 6% on light faces).\n5. Drop shadow in two layers: a tight contact shadow 0 1px 2px plus a soft\n   lift 0 4px 10px -3px (18% and 28% on slate, about a third of that on\n   light faces).\n\nStates (hover, pressed/active, focus-visible, disabled):\n- Hover: face one step lighter; the lift grows to 0 8px 16px -5px.\n- Pressed: translateY(1px); flip the gradient (darker on top); the outer\n  shadow collapses to 0 1px 1px; the top highlight becomes an inner shadow,\n  inset 0 1px 2px black (40% on slate, 12-16% on light faces). Light faces\n  keep a 1px white line below, 0 1px 0 rgba(255,255,255,.9), like a key\n  pressed into paper.\n- Give rest and pressed the same number of inset layers (pad with\n  inset 0 0 0 transparent) so the shadow animates instead of jumping.\n- Focus-visible and disabled follow the library's existing conventions.\n- Timing: 120ms for transform, 140ms for shadows, 160ms for colors.\n\nSizes: all values above are for the 14px label size: height 40px,\npadding 0 18px, radius 10px, label weight 600, optional 16px leading icon.\nOn the slate face add a label text-shadow 0 -1px 0 rgba(0,0,0,.28).\nScale the material with the type, never keep it at fixed pixels: express\nevery length (height, padding, radius, border, icon, the 1px press offset,\nand every shadow offset, blur and spread) as a multiple of a size unit\nu = label size / 14. Provide two sizes: md (14px label, u = 1px) and\nlg (16px label, u = 16/14 px, so height 45.7px, radius 11.4px, lift shadow\n0 4.6px 11.4px -3.4px).","skill":"/skills/kubai-skeuomorphic-buttons/SKILL.md","skillText":"# 有按压反馈的拟物按钮\n\n《999 个小技巧，让你 Vibe 的产品更有质感》第 001 期 · @kubai087\n\n在用户的项目里按下面的要求改造。要求以用户的口吻写成：文中的 I、me、my 指用户；写着要先问的地方，先停下来问用户再继续。\n\n## 改造要求\n\nDefine a tactile, skeuomorphic Button component with five variants, from\nstrongest to weakest: primary, secondary, tertiary, ghost, text.\nIf the project already has a component library or design system, do not\nadd a new component: restyle its existing Button through its own variant\nand token system, and keep its API, props and accessibility as they are.\nOtherwise create one reusable Button with `variant` and `size` props.\n\nStyle: calm and precise, like the Lumno browser extension and the Cloudflare\ndashboard. Neutral grays only, no brand hues. Lit from straight above.\nNo glossy Web 2.0 shine, no glow, no large blur.\n\nVariants:\n1. primary   - near-black slate face (#404859 -> #273042), white label\n2. secondary - raised white key (#FFFFFF -> #F4F5F7), dark gray label\n3. tertiary  - soft gray key (#F3F4F6 -> #E7E9EC), dark gray label\n4. ghost     - no face at rest; faint gray fill on hover; a recessed well\n               when pressed\n5. text      - gray label with a thin underline and an arrow that nudges\n               right on hover\n\nEvery filled variant is the same five material layers; only the values\nchange, so define them once as tokens and let each variant set its own:\n1. Face: 180deg linear gradient, top 6-8% lighter than bottom.\n2. Edge: 1px solid border one step darker than the bottom of the face\n   (primary #12161F, secondary rgba(15,23,42,.14), tertiary rgba(15,23,42,.1)).\n3. Top highlight: inset 0 1px 0 white (18% on slate, 85-100% on light\n   faces). Put every inset layer in the button's own box-shadow, before the\n   drop layers, never on a pseudo-element overlay: inset shadows on the\n   element follow the inner radius (outer radius minus border), so the\n   corners line up in every state.\n4. Bottom shade: inset 0 -1px 0 black (22% on slate, 6% on light faces).\n5. Drop shadow in two layers: a tight contact shadow 0 1px 2px plus a soft\n   lift 0 4px 10px -3px (18% and 28% on slate, about a third of that on\n   light faces).\n\nStates (hover, pressed/active, focus-visible, disabled):\n- Hover: face one step lighter; the lift grows to 0 8px 16px -5px.\n- Pressed: translateY(1px); flip the gradient (darker on top); the outer\n  shadow collapses to 0 1px 1px; the top highlight becomes an inner shadow,\n  inset 0 1px 2px black (40% on slate, 12-16% on light faces). Light faces\n  keep a 1px white line below, 0 1px 0 rgba(255,255,255,.9), like a key\n  pressed into paper.\n- Give rest and pressed the same number of inset layers (pad with\n  inset 0 0 0 transparent) so the shadow animates instead of jumping.\n- Focus-visible and disabled follow the library's existing conventions.\n- Timing: 120ms for transform, 140ms for shadows, 160ms for colors.\n\nSizes: all values above are for the 14px label size: height 40px,\npadding 0 18px, radius 10px, label weight 600, optional 16px leading icon.\nOn the slate face add a label text-shadow 0 -1px 0 rgba(0,0,0,.28).\nScale the material with the type, never keep it at fixed pixels: express\nevery length (height, padding, radius, border, icon, the 1px press offset,\nand every shadow offset, blur and spread) as a multiple of a size unit\nu = label size / 14. Provide two sizes: md (14px label, u = 1px) and\nlg (16px label, u = 16/14 px, so height 45.7px, radius 11.4px, lift shadow\n0 4.6px 11.4px -3.4px).\n"}