{"summary":"一組有點擊手感的擬物按鈕：五個層級、五層材質，以及懸停和按下時的光影變化，適合後台和工具類產品。","notes":"<p>扁平按鈕按下時通常只是顏色稍微變深，快速點擊時幾乎看不出來；擬物按鈕按下時會下沉，位置、漸層和陰影同時變化，使用者能確認這一下按到了。要點有以下五條：</p>\n        <ol>\n        <li><strong>五個層級</strong>：適合按鈕多、顏色少的後台、編輯器和設定頁，主次只能靠明暗和材質區分。由強到弱為 primary 深石板色按鍵、secondary 凸起的白色按鍵、tertiary 淺灰按鍵、ghost 平時沒有底色、text 只有文字和細底線；同一區域只放一個 primary。</li>\n        <li><strong>五層材質</strong>：有底色的三個層級都由同樣的五層構成：頂部淺 6–8% 的漸層面，比漸層底部深一階的 1px 邊框，頂部一道白色亮光，底部一道暗線，以及貼地陰影加柔和投影兩層。層級之間只有數值不同，五層定義成一組 token，由各層級分別賦值。</li>\n        <li><strong>懸停與按下</strong>：懸停時按鍵面亮一階，投影變大。按下時下移 1px，漸層上下翻轉，投影收到幾乎貼地，頂部亮光變成一道內陰影。靜止和按下的內陰影層數要相同，不足的以透明陰影補齊，陰影才會平順過渡。</li>\n        <li><strong>光源與顏色</strong>：光源固定在正上方，亮光總在頂部、暗線總在底部，整組按鈕看起來在同一個空間裡。只用中性灰，不用品牌色，層級靠明暗區分；也不用鏡面亮光、外光暈和大範圍模糊。</li>\n        <li><strong>依字級縮放</strong>：高度、內距、圓角、邊框和每層陰影的偏移、模糊，都寫成單位 u = 字級 / 14 的倍數。14px 文字時 u = 1px，按鈕高 40px；16px 文字時 u ≈ 1.14px，按鈕高約 45.7px，陰影依相同比例放大。</li>\n        </ol>\n        <h2>參數</h2>\n        <dl class=\"params\">\n        <dt>尺寸</dt><dd>文字 14px；高 40px；圓角 10px；左右內距 18px</dd>\n        <dt>按下</dt><dd>下移 1px；投影收為 0 1px 1px</dd>\n        <dt>時長</dt><dd>位移 120ms；陰影 140ms；顏色 160ms</dd>\n        </dl>\n        <p>附帶的提示詞會優先改造專案中現有的按鈕元件，保留原有的 API 和無障礙設定；專案中沒有按鈕元件時，才新建一個。</p>","prompt":"Define a tactile, skeuomorphic Button component with five variants, from\nstrongest to weakest: primary, secondary, tertiary, ghost, text.\nIf the project already has a component library or design system, do not\nadd a new component: restyle its existing Button through its own variant\nand token system, and keep its API, props and accessibility as they are.\nOtherwise create one reusable Button with `variant` and `size` props.\n\nStyle: calm and precise, like the Lumno browser extension and the Cloudflare\ndashboard. Neutral grays only, no brand hues. Lit from straight above.\nNo glossy Web 2.0 shine, no glow, no large blur.\n\nVariants:\n1. primary   - near-black slate face (#404859 -> #273042), white label\n2. secondary - raised white key (#FFFFFF -> #F4F5F7), dark gray label\n3. tertiary  - soft gray key (#F3F4F6 -> #E7E9EC), dark gray label\n4. ghost     - no face at rest; faint gray fill on hover; a recessed well\n               when pressed\n5. text      - gray label with a thin underline and an arrow that nudges\n               right on hover\n\nEvery filled variant is the same five material layers; only the values\nchange, so define them once as tokens and let each variant set its own:\n1. Face: 180deg linear gradient, top 6-8% lighter than bottom.\n2. Edge: 1px solid border one step darker than the bottom of the face\n   (primary #12161F, secondary rgba(15,23,42,.14), tertiary rgba(15,23,42,.1)).\n3. Top highlight: inset 0 1px 0 white (18% on slate, 85-100% on light\n   faces). Put every inset layer in the button's own box-shadow, before the\n   drop layers, never on a pseudo-element overlay: inset shadows on the\n   element follow the inner radius (outer radius minus border), so the\n   corners line up in every state.\n4. Bottom shade: inset 0 -1px 0 black (22% on slate, 6% on light faces).\n5. Drop shadow in two layers: a tight contact shadow 0 1px 2px plus a soft\n   lift 0 4px 10px -3px (18% and 28% on slate, about a third of that on\n   light faces).\n\nStates (hover, pressed/active, focus-visible, disabled):\n- Hover: face one step lighter; the lift grows to 0 8px 16px -5px.\n- Pressed: translateY(1px); flip the gradient (darker on top); the outer\n  shadow collapses to 0 1px 1px; the top highlight becomes an inner shadow,\n  inset 0 1px 2px black (40% on slate, 12-16% on light faces). Light faces\n  keep a 1px white line below, 0 1px 0 rgba(255,255,255,.9), like a key\n  pressed into paper.\n- Give rest and pressed the same number of inset layers (pad with\n  inset 0 0 0 transparent) so the shadow animates instead of jumping.\n- Focus-visible and disabled follow the library's existing conventions.\n- Timing: 120ms for transform, 140ms for shadows, 160ms for colors.\n\nSizes: all values above are for the 14px label size: height 40px,\npadding 0 18px, radius 10px, label weight 600, optional 16px leading icon.\nOn the slate face add a label text-shadow 0 -1px 0 rgba(0,0,0,.28).\nScale the material with the type, never keep it at fixed pixels: express\nevery length (height, padding, radius, border, icon, the 1px press offset,\nand every shadow offset, blur and spread) as a multiple of a size unit\nu = label size / 14. Provide two sizes: md (14px label, u = 1px) and\nlg (16px label, u = 16/14 px, so height 45.7px, radius 11.4px, lift shadow\n0 4.6px 11.4px -3.4px).","skill":"/skills/kubai-skeuomorphic-buttons/SKILL.md","skillText":"# 有按压反馈的拟物按钮\n\n《999 个小技巧，让你 Vibe 的产品更有质感》第 001 期 · @kubai087\n\n在用户的项目里按下面的要求改造。要求以用户的口吻写成：文中的 I、me、my 指用户；写着要先问的地方，先停下来问用户再继续。\n\n## 改造要求\n\nDefine a tactile, skeuomorphic Button component with five variants, from\nstrongest to weakest: primary, secondary, tertiary, ghost, text.\nIf the project already has a component library or design system, do not\nadd a new component: restyle its existing Button through its own variant\nand token system, and keep its API, props and accessibility as they are.\nOtherwise create one reusable Button with `variant` and `size` props.\n\nStyle: calm and precise, like the Lumno browser extension and the Cloudflare\ndashboard. Neutral grays only, no brand hues. Lit from straight above.\nNo glossy Web 2.0 shine, no glow, no large blur.\n\nVariants:\n1. primary   - near-black slate face (#404859 -> #273042), white label\n2. secondary - raised white key (#FFFFFF -> #F4F5F7), dark gray label\n3. tertiary  - soft gray key (#F3F4F6 -> #E7E9EC), dark gray label\n4. ghost     - no face at rest; faint gray fill on hover; a recessed well\n               when pressed\n5. text      - gray label with a thin underline and an arrow that nudges\n               right on hover\n\nEvery filled variant is the same five material layers; only the values\nchange, so define them once as tokens and let each variant set its own:\n1. Face: 180deg linear gradient, top 6-8% lighter than bottom.\n2. Edge: 1px solid border one step darker than the bottom of the face\n   (primary #12161F, secondary rgba(15,23,42,.14), tertiary rgba(15,23,42,.1)).\n3. Top highlight: inset 0 1px 0 white (18% on slate, 85-100% on light\n   faces). Put every inset layer in the button's own box-shadow, before the\n   drop layers, never on a pseudo-element overlay: inset shadows on the\n   element follow the inner radius (outer radius minus border), so the\n   corners line up in every state.\n4. Bottom shade: inset 0 -1px 0 black (22% on slate, 6% on light faces).\n5. Drop shadow in two layers: a tight contact shadow 0 1px 2px plus a soft\n   lift 0 4px 10px -3px (18% and 28% on slate, about a third of that on\n   light faces).\n\nStates (hover, pressed/active, focus-visible, disabled):\n- Hover: face one step lighter; the lift grows to 0 8px 16px -5px.\n- Pressed: translateY(1px); flip the gradient (darker on top); the outer\n  shadow collapses to 0 1px 1px; the top highlight becomes an inner shadow,\n  inset 0 1px 2px black (40% on slate, 12-16% on light faces). Light faces\n  keep a 1px white line below, 0 1px 0 rgba(255,255,255,.9), like a key\n  pressed into paper.\n- Give rest and pressed the same number of inset layers (pad with\n  inset 0 0 0 transparent) so the shadow animates instead of jumping.\n- Focus-visible and disabled follow the library's existing conventions.\n- Timing: 120ms for transform, 140ms for shadows, 160ms for colors.\n\nSizes: all values above are for the 14px label size: height 40px,\npadding 0 18px, radius 10px, label weight 600, optional 16px leading icon.\nOn the slate face add a label text-shadow 0 -1px 0 rgba(0,0,0,.28).\nScale the material with the type, never keep it at fixed pixels: express\nevery length (height, padding, radius, border, icon, the 1px press offset,\nand every shadow offset, blur and spread) as a multiple of a size unit\nu = label size / 14. Provide two sizes: md (14px label, u = 1px) and\nlg (16px label, u = 16/14 px, so height 45.7px, radius 11.4px, lift shadow\n0 4.6px 11.4px -3.4px).\n"}